Schaub, Adam

Dr. Adam Schaub

E-Mail: adam.schaub@fau.de

Mitarbeiterprofil

Projekte

Es wurden leider keine Projekte gefunden.

Veröffentlichungen

2017

Butzhammer L., Dubjella P., Huber F., Schaub A., Aumüller M., Baum A., Petrunenko O., Merklein M., Schmidt M.:
Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V
Lasers in Manufacturing LIM 2017 (München, 26. Juni 2017 - 29. Juni 2017)

2016

Ahuja B., Schaub A., Junker D., Karg M., Tenner F., Plettke R., Merklein M., Schmidt M.:
A ROUND ROBIN STUDY FOR LASER BEAM MELTING IN METAL POWDER BED
In: South African Journal of Industrial Engineering 27 (2016), S. 30-42
ISSN: 1012-277X
DOI: 10.7166/27-2-1201
URL: http://sajie.journals.ac.za/pub/article/view/1201/682
Merklein M., Dubjella P., Schaub A., Butzhammer L., Schmidt M.:
Interaction of Additive Manufacturing and Forming
6th International Conference on Additive Technologies iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (Hrsg.): Proceedings of 6th International Conference on Additive Technologies 2016
Merklein M., Junker D., Schaub A., Neubauer F.:
Hybrid Additive Manufacturing Technologies - An Analysis regarding Potentials and Applications
In: Physics Procedia 83 (2016), S. 549-559
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.057
Schaub A., Ahuja B., Butzhammer L., Osterziel J., Schmidt M., Merklein M.:
Additive Manufacturing of Functional Elements on Sheet Metal
In: Physics Procedia 83 (2016), S. 797-807
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.082
URL: http://www.sciencedirect.com/science/article/pii/S1875389216301894
Schaub A., Degner J., Ahuja B., Schmidt M., Merklein M.:
Numerical Investigation for Superplastic Forming Tool Development Within the Combined Process Chain of Forming and Additive Manufacturing
Int. Conf. Competitive Manufacturing (Stellenbosch, Südafrika, 27. Januar 2016 - 29. Januar 2016)
In: Dimitrov, D; Oosthuizen, T. (Hrsg.): Int. Conf. Competitive Manufacturing 2016
URL: https://scholar.sun.ac.za/items/58ebf8f5-8f53-4443-b13f-cdca8bef39ab

2015

Ahuja B., Schaub A., Karg M., Schmidt R., Merklein M., Schmidt M.:
High Power Laser Beam Melting of Ti-6Al-4V on Formed Sheet Metal to achieve Hybrid structures
Laser 3D Manufacturing II (The Moscone Center San Francisco California, 7. Februar 2015 - 12. Februar 2015)
In: Henry Helvajian, Alberto Piqué, Martin Wegener, Bo Gu (Hrsg.): Proc. of SPIE Vol. 9353, 93530X 2015
DOI: 10.1117/12.2082919
URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2208237&resultClick=1
Hagenah H., Merklein M., Lechner M., Schaub A., Lutz S.:
Determination of the mechanical properties of hot stamped parts from numerical simulations
In: Procedia CIRP 33 (2015), S. 167-172
ISSN: 2212-8271
DOI: 10.1016/j.procir.2015.06.031
Karg M., Ahuja B., Schaub A., Schmidt J., Sachs M., Mahr A., Wiesenmayer S., Wigner L., Wirth KE., Peukert W., Merklein M., Schmidt M.:
Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed
Lasers in Manufacturing Conference 2015 (Messe München, 22. Juni 2015 - 25. Juni 2015)
In: Proceedings of Laser in Manfacturing Conference 2015 2015
Open Access: http://www.wlt.de/lim/Proceedings/Stick/PDF/Contribution146_final.pdf
URL: http://www.wlt.de/lim/Proceedings/Stick/4.html
Merklein M., Junker D., Schaub A., Kretschmer A., Lechner M.:
Development of a New Method for Producing Plane Expanded Metal by Laser Cutting and Forming of Metal Plates under Uniaxial Tension
In: Key Engineering Materials 639 (2015), S. 131-136
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.131
Merklein M., Plettke R., Junker D., Schaub A., Ahuja B.:
Mechanical Testing of Additive Manufactured Metal Parts
In: Key Engineering Materials 651-653 (2015), S. 713-718
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.651-653.713

2014

Ahuja B., Schaub A., Junker D., Karg M., Tenner F., Plettke R., Merklein M., Schmidt M.:
A round robin study for Laser Beam Melting in Metal Powder Bed: Comparing mechanical characteristics with system technology variation
15th Annual Conference of RAPDASA 2014
In: Proc. 15th Annual Conference of RAPDASA 2014 2014
Ahuja B., Schaub A., Karg M., Lechner M., Merklein M., Schmidt M.:
Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics
In: Physics Procedia 56 (2014), S. 90-98
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.102
URL: http://www.sciencedirect.com/science/article/pii/S1875389214002478
Juechter V., Schaub A., Merklein M., Singer R. F.:
Titanium metal sheet structures of various wall thicknesses with additional functional elements prepared by selective electron beam melting in a powder bed
5th International Conference on Additive Technologies - iCAT2014
In: Drstvensek, I. (Hrsg.): 5th International Conference on Additive Technologies - iCAT2014 2014
Merklein M., Suttner S., Schaub A.:
Experimental investigation of Ti-6Al-4V with a biaxial tensile test setup at elevated temperature
In: Key Engineering Materials 622-623 (2014), S. 273-278
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.622-623.273
Plettke R., Schaub A., Gröschel C., Scheitler CJ., Heinle M., Ranft F., Merklein M., Schmidt M., Drummer D.:
A new process chain for joining sheet metal to fibre composite sheets
Material Forming ESAFORM 2014 (Finnland, 7. Mai 2014 - 9. Mai 2014)
In: Key Engineering Materials (Volumes 611 - 612) 2014
DOI: 10.4028/www.scientific.net/KEM.611-612.1468
Plettke R., Schaub A., Gröschel C., Scheitler CJ., Vetter M., Hentschel O., Ranft F., Merklein M., Schmidt M., Drummer D.:
A new process chain for joining sheet metal to fibre composite sheets
In: Key Engineering Materials 611-612 (2014), S. 1468-1475
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.1468
Schaub A., Ahuja B., Karg M., Schmidt M., Merklein M.:
Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal
Direct Digital Manufacturing Conference DDMC 2014 (Grand Hotel Esplanade Berlin, 12. März 2014 - 13. März 2014)
In: Axel Demmer (Hrsg.): Proceedings DDMC 2014 Fraunhofer direct digital Manufacturing conference 2014
URL: http://www.ddmc-fraunhofer.de/
Schaub A., Jüchter V., Singer R., Merklein M.:
Characterization of hybrid components consisting of SEBM additive structures and sheet metal of alloy Ti-6Al-4V
In: Key Engineering Materials (2014), S. 609-614
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.609

2013

Merklein M., Hagenah H., Kaupper M., Schaub A.:
Analysis of the deformation behavior of Ti-6Al-4V at elevated temperatures
In: Key Engineering Materials 554-557 (2013), S. 29-32
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.29
Merklein M., Hagenah H., Kaupper M., Schaub A.:
Mechanical response of Ti-6Al-4V alloy on deformation at moderate temperatures
In: Key Engineering Materials 549 (2013), S. 311-316
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.311
Schaub A., Lechner M., Merklein M.:
Druckversuch bei erhöhten Temperaturen
Werkstoffprüfung DGM
In: H.J. Christ (Hrsg.): Tagungsband Werkstoffprüfung DGM 2013
Schaub A., Merklein M., Jüchter V., Singer R., Körner C.:
Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung
2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung
In: Drummer, D. (Hrsg.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2013

Dr. Adam Schaub

Mitarbeiterprofil

Projekte

Veröffentlichungen

2017 2017

2016 2016

2015 2015

2014 2014

2013 2013

2017

2016

2015

2014

2013