Lechner Michael
Prof. Dr.-Ing. habil. Dipl.-Wirtsch.-Ing. Michael Lechner
Department Maschinenbau (MB)
Lehrstuhl für Fertigungstechnologie (LFT, Prof. Merklein)
91058 Erlangen
- Telefon: +49 9131 85-28310
- E-Mail: michael.lechner@fau.de
- Webseite: http://www.lft.fau.de
Mitarbeiterprofil
Leiter Arbeitskreis „Technologie“ des DFG Sonderfoschungsbereichs/Transregios 285 Mitglied der Graduate School of Advanced Optical TechnologiesSonstigesLehrveranstaltungen
Sommersemester 2025
Vorlesung mit Übung
Projekte
Veröffentlichungen
2025
- , , , , , , , :
Non-destructive testing in versatile joining processes
21st International Conference on Sheet Metal (Paderborn, 1. April 2025 - 3. April 2025)
In: G. Meschut, M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P. Martins, M. Merklein, F. Micari (Hrsg.): Sheet Metal 2025 2025
DOI: 10.21741/9781644903551-12 - , , , , , , :
Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting
Sheet Metal 2025 (Paderborn, 1. April 2025 - 3. April 2025)
In: Materials Research Proceedings 52 2025
DOI: 10.21741/9781644903551-13
2024
- , , , :
Tailored Heat Treatment Strategy for the Orbital Forming of Functional Components from EN AW-7075
DOI: 10.1007/978-3-031-41023-9_70
URL: https://link.springer.com/chapter/10.1007/978-3-031-41023-9_70 - , , , , , :
Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming
In: Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering (2024)
ISSN: 0954-4089
DOI: 10.1177/09544089241282807 - , , , , :
A Comparative Investigation Introducing Regularization Techniques in Linear Regression Models for Quality Prediction in Forming Technology
2024 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2024 (Bangkok, THA, 15. Dezember 2024 - 18. Dezember 2024)
In: IEEE International Conference on Industrial Engineering and Engineering Management 2024
DOI: 10.1109/IEEM62345.2024.10857210 - , , , , , , :
A lightweight sensor ontology for supporting sensor selection, deployment, and data processing in forming processes
In: Production Engineering (2024)
ISSN: 0944-6524
DOI: 10.1007/s11740-024-01290-2 - , , :
Influence of the process time on a self-piercing riveting process with tumbling kinematic
In: Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering (2024)
ISSN: 0954-4089
DOI: 10.1177/09544089241248430 - , , , :
Investigation on the limp properties of formed foils for hydrogen applications
In: IOP Conference Series: Materials Science and Engineering 1307 (2024), Art.Nr.: 012031
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1307/1/012031
2023
- , , , , , , , , :
Stability of Bipolar Plate Materials for Proton-Exchange Membrane Water Electrolyzers: Dissolution of Titanium and Stainless Steel in DI Water and Highly Diluted Acid
In: ChemElectroChem (2023)
ISSN: 2196-0216
DOI: 10.1002/celc.202300373 - , , , , , :
Numerical modelling of the process chain for aluminium Tailored Heat-Treated Profiles
In: Advanced Modeling and Simulation in Engineering Sciences 10 (2023), Art.Nr.: 8
ISSN: 2213-7467
DOI: 10.1186/s40323-023-00247-x - , , :
Investigation on the shear cutting of functional components manufactured in an orbital forming process
20th International Conference on Sheet Metal, SheMet 2023 (Nuremberg, 3. April 2023 - 5. April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Paulo Martins, Gerson Meschut, Fabrizio Micari (Hrsg.): Materials Research Proceedings, Millersville PA, USA: 2023
DOI: 10.21741/9781644902417-8
URL: https://www.mrforum.com/product/9781644902417-8/ - , , , , , :
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
In: Materials Design and Applications IV, Springer Science and Business Media Deutschland GmbH, 2023, S. 137-149 (Advanced Structured Materials, Bd.168)
DOI: 10.1007/978-3-031-18130-6_10 - , , , , :
Innovative mechanical joining processes in versatile process chains - potentials, applications and selection procedures
Sheet Metal 2023 - 20th International Conference on Sheet Metal (Nürnberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-13 - , , :
Influence of the process time on a self-piercing riveting process with tumbling kinematic
3rd International Conference on Advanced Joining Processes (Braga, 19. Oktober 2023 - 20. Oktober 2023)
In: 3rd International Conference on Advanced Joining Processes 2023 2023 - , , :
Versatile self-piercing riveting with a tumbling superimposed punch
26th International ESAFORM Conference on Material Forming (Kraków, 19. April 2023 - 21. April 2023)
DOI: 10.21741/9781644902479-122 - , , , :
Combination of versatile self-piercing riveting processes
International Conference on Sheet Metal 2023 (Nuremberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-16
2022
- , , , , :
Potential of Orbital Formed Tailored Blanks for Industrial Application
Steel in Cars and Trucks (SCT) (Milano, 20. Juni 2022 - 23. Juni 2022) - , , :
Investigation on a quasi-incremental tool concept to manufacture functional components with sheet thickness gradient
12th Tooling 2022 Conference and Exhibition (Örebro, 25. April 2022 - 27. April 2022) - , , , :
Optical forming analysis of functional components manufactured in an orbital forming process
XL. Colloquium on Metal Forming (Zauchensee, Austria, 12. März 2022 - 15. März 2022) - , , , , :
Joining of multi-material structures using a versatile self-piercing riveting process
In: Production Engineering (2022)
ISSN: 0944-6524
DOI: 10.1007/s11740-022-01151-w - , , , , , , , :
Analysis of Distributed-Ledger-Technology for the Exchange of Design, Production and Simulation Data in Roll Forming
41st Annual Conference of the International-Deep-Drawing-Research-Group (IDDRG) (Lorient)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), BRISTOL: 2022
DOI: 10.1088/1757-899X/1238/1/012070 - , , , , , , , , , , , , , , , , , , , , , , , , :
Review on mechanical joining by plastic deformation
In: Journal of Advanced Joining Processes (2022)
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2022.100113 - , , , , , , :
Cyber-Physical Systems in the Context of Industry 4.0: A Review, Categorization and Outlook
In: Information Systems Frontiers (2022)
ISSN: 1387-3326
DOI: 10.1007/s10796-022-10252-x
URL: https://link.springer.com/article/10.1007/s10796-022-10252-x - , , , , :
Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
In: Journal of Manufacturing and Materials Processing 6 (2022), S. 127
ISSN: 2504-4494
DOI: 10.3390/jmmp6060127 - , , , :
Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022), S. 146442072211354
ISSN: 1464-4207
DOI: 10.1177/14644207221135400 - , :
Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022), S. 146442072210800
ISSN: 1464-4207
DOI: 10.1177/14644207221080068 - , :
Mechanical and geometrical characterisation of tumbling self-piercing riveting joints in multi-material-systems
In: IOP Conference Series: Materials Science and Engineering 1270 (2022), S. 012124
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1270/1/012124 - , :
Versatile tool design for a tumbling self-piercing riveting process
The 12th Tooling Conference & Exhibition, Tooling 2022 (Örebro, 25. April 2022 - 27. April 2022)
2021
- , , , , :
Inverse parameter identification of an anisotropic plasticity model for sheet metal
40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012004 - , :
Orbital Forming of Tailored Blanks for Industrial Application
In: Merklein M, Tekkaya A. E, Behrens B-A (Hrsg.): Sheet Bulk Metal Forming, Cham: Springer Nature, 2021, S. 458-476 (Lecture Notes in Production Engineering)
ISBN: 978-3-030-61901-5
DOI: 10.1007/978-3-030-61902-2 - , , :
Joining of hybrid semi-finished products from sheet metal by orbital forming
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2021), S. 1-9
ISSN: 1464-4207
DOI: 10.1177/14644207211067649 - , , :
Influence of a local short-term heat treatment on the formability of orbital formed functional components
In: Procedia Manufacturing 53 (2021), S. 72-79
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2021.06.012 - , , , , , , , , , :
Functional Analysis of Components Manufactured by a Sheet-Bulk Metal Forming Process
In: Journal of Manufacturing and Materials Processing 5 (2021), S. 1-18
ISSN: 2504-4494
DOI: 10.3390/jmmp5020049 - , , , , , :
Blockchain-Systeme für den manipulationssicheren Datenaustausch in der industriellen Fertigung: Distributed Ledgers für den Materialdatenaustausch
In: wt Werkstattstechnik - Online 111 (2021), S. 857-862
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2021-11-12-88 - , , , , , :
Distributed Ledgers für den Materialdatenaustausch
In: wt Werkstattstechnik - Online 111 (2021), S. 857 - 862
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2021-11-12-87 - , , :
Experimental analysis of the influence of the embossing and upsetting process on joint strength in resistance element welding with upset auxiliary joining elements
40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012002 - , , , :
Process Combination for the Manufacturing of Toothed, Thin-Walled Functional Elements by Using Process Adapted Semi-finished Products
DOI: 10.1007/978-3-030-61902-2_1 - , , :
Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process
In: Production Engineering (2021)
ISSN: 0944-6524
DOI: 10.1007/s11740-021-01099-3 - , :
Friction Characterisation for a Tumbling Self-Piercing Riveting Process
In: Key Engineering Materials 883 (2021), S. 27-34
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.883.27 - , :
Investigation of the Influence of the Tumbling Angle on a Tumbling Self-Piercing Riveting Process
2nd International Conference on Advanced Joining Processes AJP 2021
DOI: 10.1177/14644207221080068 - , :
Material characterisation methods for a tumbling self-piercing riveting process
24th International ESAFORM Conference on Material Forming, ESAFORM 2021 (, 14. April 2021 - 16. April 2021)
In: ESAFORM 2021 - 24th International Conference on Material Forming 2021
DOI: 10.25518/esaform21.398
2020
- , :
Lokale Kurzzeitwärmebehandlung zur Erweiterung der Formgebungsgrenzen prozessangepasster Halbzeuge der Aluminiumlegierung AA6016
23. Umformtechnisches Kolloquium Hannover (Hannover, 4. März 2020 - 5. März 2020)
In: Behrens B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover, Hannover: 2020 - , , :
Enhancement of the Forming Limits for Orbital Formed Tailored Blanks by Local Short-term Heat Treatment
In: Procedia Manufacturing 47 (2020), S. 1197-1202
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.04.177 - , , , , , :
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
Material Science and Engineering Congress - MSE 2020 (Darmstadt, 22. September 2020 - 25. September 2020) - , , , , , , :
Blockchain in sheet metal processing.
In: wt Werkstattstechnik - Online 110 (2020), S. 704-708
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2020-10-60 - , , :
Fundamental analysis For the application of hybrid semi-finished products in sheet-bulk metal forming
In: Journal of Materials Processing Technology 283 (2020), Art.Nr.: 116709
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116709 - , , , :
Additive Manufacturing of Tailored Blank for Sheet-Bulk Metal Forming Processes
DOI: 10.1088/1757-899X/967/1/012034 - , , , , , , , , :
Data acquisition and control at the edge: a hardware/software-reconfigurable approach
In: Production Engineering 14 (2020), S. 365-371
ISSN: 0944-6524
DOI: 10.1007/s11740-020-00964-x - , , , , :
Verfahrenskombination zur umformtechnischen Herstellung von verzahnten, dünnwandigen Funktionselementen aus prozessoptimierten Halbzeugen
23. Umformtechnisches Kolloquium Hannover (Hannover, 4. März 2020 - 5. März 2020)
In: Behrens B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 2020 - , , , :
Determination of the properties of semi-finished parts in blanking processes
International Deep-Drawing Research Group (IDDRG 2020) (Busan, 26. Oktober 2020 - 30. Oktober 2020)
In: IOP Conference Series: Materials Science and Engineering 2020
DOI: 10.1088/1757-899X/967/1/012009 - , , , :
Test method for friction characterization of rivets
In: Defect and Diffusion Forum 404 DDF (2020), S. 132-137
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.132
2019
- , , , , , , , :
Blockchain for forming technology - Tamper-proof exchange of production data
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012046 - , , , , , , :
4.0 in metal forming - Questions and challenges
12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2018 (Naples, 18. Juli 2018 - 20. Juli 2018)
In: Roberto Teti (Hrsg.): Procedia CIRP 2019
DOI: 10.1016/j.procir.2019.02.055 - , , :
Augmented Reality for Forming Technology - Visualisation of Simulation Results and Component Measurement
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012045 - , , , , :
Analysing resistance element welding with upset auxiliary joining steel-elements under shear load
18th International Conference on Sheet Metal, SHEMET 2019 (Leuven, 15. April 2019 - 17. April 2019)
In: Joost R. Duflou, Yannick Carette, Livan Fratini, Fabrizio Micari, Marion Merklein, Hinnerk Hagenah (Hrsg.): Procedia Manufacturing 2019
DOI: 10.1016/j.promfg.2019.02.145 - , , , , , :
Maßgeschneiderter Werkzeugoberflächen in einem flexiblen Walzprozess
DOI: 10.25593/978-3-96147-280-2
(Conference report)
2018
- , , , , :
Orbital forming of tailored blanks with two-sided local material thickening
In: International Journal of Advanced Manufacturing Technology 97 (2018), S. 1-10
ISSN: 0268-3768
DOI: 10.1007/s00170-018-2009-7 - , , , :
Influence of ultrasonic vibration on the shear formability of metallic materials
In: CIRP Annals - Manufacturing Technology 67 (2018), S. 277-280
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2018.04.108 - , :
Manufacturing of process adapted tailored blanks by a flexible rolling process using the aluminum alloy AA6016
In: Key Engineering Materials 15 (2018), S. 1224-1231
ISSN: 1013-9826
DOI: 10.1016/j.promfg.2018.07.365
2017
- , , , , :
Towards virtual deformation dilatometry for the design of hot stamping process
International Conference on the Technology of Plasticity, ICTP 2017 (Hucisko, GBR, 17. September 2017 - 22. September 2017)
In: Julian Allwood (Hrsg.): Procedia Engineering 2017
DOI: 10.1016/j.proeng.2017.10.945 - , , , , , :
Linked heat treatment and bending simulation of aluminium tailored heat treated profiles
4th World Congress on Integrated Computational Materials Engineering, ICME 2017 ( Ypsilanti, MI, USA, 21. Mai 2017 - 25. Mai 2017)
In: Paul Mason, Georg J. Schmitz, Amarendra K. Singh, Charles R. Fisher, Alejandro Strachan, Ryan Glamm, Michele V. Manuel (Hrsg.): Minerals, Metals and Materials Series 2017
DOI: 10.1007/978-3-319-57864-4_22 - , , , , , , :
Precipitation behaviour and mechanical properties during short‑term heat treatment for tailor heat treated profiles (THTP) of aluminium alloy 6060 T4
15th International Conference on Aluminium Alloys, ICAA 2016 (Chongqing, 12. Juni 2016 - 16. Juni 2016)
In: Qing Liu, Robert Sanders, Zhihong Jia, Lingfei Cao, Jian-Feng Nie, Jian-Feng Nie (Hrsg.): Materials Science Forum 2017
DOI: 10.4028/www.scientific.net/MSF.877.400 - , , , , , , :
Data-driven Model Development for Quality Prediction in Forming Technology
In: 15th IEEE International Conference on Industrial Informatics (INDIN) 2017
DOI: 10.1109/INDIN.2017.8104871 - , , , :
Augmented Reality Technology for the Purpose of Sheet Metal Forming Simulation Evaluation
10th Forming Technology Forum 2017 - Model Based Control for Smart Forming Processes
In: van den Boogaard, T. (Hrsg.): 10th Forming Technology Forum 2017 - Model Based Control for Smart Forming Processes 2017 - , , , , , , :
Data-Based Control of A Multi-Step Forming Process
In: Proc. International Deep Drawing Research Group Conf. IDDRG 2017 2017
DOI: 10.1088/1742-6596/896/1/012037 - , , , :
Designing, manufacturing and processing of Tailored Blanks in a sheet-bulk metal forming process
In: 45th SME North American Manufacturing Research Conference, NAMRC 45, LA, USA 2017
DOI: 10.1016/j.promfg.2017.07.059 - , , , , :
Analysis of fundamental dependencies between manufacturing and processing Tailored Blanks in sheet-bulk metal forming processes
In: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom 2017
DOI: 10.1016/j.proeng.2017.10.779 - , , , , :
Umformtechnische Herstellung von Funktionsbauteilen aus Tailored Blanks durch Blechmassivumformverfahren
22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017 (, 15. März 2017 - 16. März 2017)
In: 22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017 2017 - , , , , :
Manufacturing of tailored blanks by flexible rolling and its application in a sheet-bulk metal forming process
SCT2017
In: Wieland, H. (Hrsg.): Proceedings SCT2017 2017
2016
- , , , , , :
Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW 6060 T4 extrusion profiles - Part A
In: Production Engineering 10 (2016), S. 383–389
ISSN: 0944-6524 - , , , , , :
Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW‑6060 T4 extrusion profiles – Part B
In: Production Engineering 10 (2016), S. 391–398
ISSN: 0944-6524 - , , , , , , , , , , , , , :
Manufacturing of functional elements by sheet-bulk metal forming processes
In: Production Engineering 10 (2016), S. 63-80
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0662-y - , , :
A new strategy for manufacturing tailored blanks by a flexible rolling process
In: Materials Science Forum 854 (2016), S. 99-105
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.854.99 - , , , , :
Tailoring material properties in forming technology by a local heat treatment
In: Gronostajski, Z. (Hrsg.): Advanced Metal Forming Processes in Automotive Industry 2016 - , , , :
Scale-up of Innovative Forming Solutions from Scientific Fundamentals to Industrial Applications - , , :
Improvement of the Formability of Aluminum Extrusion Profiles by a Tailored, Local Short-Term Heat Treatment
In: Dimitrov Dimiter, Oosthuizen Tiaan (Hrsg.): Proceedings COMA16 2016 - , , , , , , :
Innovative approaches for controlling the material flow in sheet-bulk metal forming processes
In: Manufacturing Review 3 (2016), S. 1-17
ISSN: 2265-4224
DOI: 10.1051/mfreview/2016001 - , , , , :
Hot Stamping of Boron Steel Sheets with Tailored Properties: a Review
In: Journal of Materials Processing Technology 228 (2016), S. 11-24
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2015.09.023 - , , , :
Interaction of various functional elements in thin-walled cups formed by a sheet-bulk metal forming process
In: K. Saanouni (Hrsg.): NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes 2016
DOI: 10.1051/matecconf/20168007003
2015
- , , :
Innovative Aluminium Lightweight Design by the Combination of Accumulative Roll Bonding and Local Intermediate Heat Treatment
In: Materials Today 2 (2015), S. 4992-4997
ISSN: 1369-7021
DOI: 10.1016/j.matpr.2015.10.088 - , , , , :
Manufacturing of Innovative Aluminum Components by Combining Shear Cutting Operation and Tailor Heat Treated Blank Technique
5th International Conference on Accuracy in Forming Technology
In: Landgrebe, D.; Drossel, W.-G.; Putz, M. (Hrsg.): 5th International Conference on Accuracy in Forming Technology 2015 - , , , , :
Determination of the mechanical properties of hot stamped parts from numerical simulations
In: Procedia CIRP 33 (2015), S. 167-172
ISSN: 2212-8271
DOI: 10.1016/j.procir.2015.06.031 - , , , , :
Process Design of Aluminum Tailor Heat Treated Blanks
In: Materials 8 (2015), S. 8524-8538
ISSN: 1996-1944
DOI: 10.3390/ma8125476 - , , , :
Effiziente maßgeschneiderte Wärmebehandlung von Blechhalbzeugen in der Serienfertigung
In: wt Werkstattstechnik - Online 105 (2015), S. 246-250
ISSN: 1436-4980 - , , , :
Effiziente maßgeschneiderte Wärmebehandlung von Blechhalbzeugen in der Serienfertigung
In: wt Werkstattstechnik - Online 4 (2015), S. 246-250
ISSN: 1436-4980 - :
Herstellung beanspruchungsangepasster Aluminiumblechhalbzeuge durch eine maßgeschneiderte Variation der Abkühlgeschwindigkeit nach Lösungsglühen (Dissertation, 2015)
DOI: 10.25593/978-3-87525-397-9 - , , :
Experimental investigation of heat-treated aluminum profiles
In: Key Engineering Materials 651-653 (2015), S. 59-64
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.651-653.59 - , , , , :
Development of a New Method for Producing Plane Expanded Metal by Laser Cutting and Forming of Metal Plates under Uniaxial Tension
In: Key Engineering Materials 639 (2015), S. 131-136
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.131 - , , :
Influence of a short-term heat treatment on the formability and ageing characteristics of aluminum profiles
Lasers in Manufacturing Conference
In: WLT e.V. (Hrsg.): Lasers in Manufacturing Conference 2015 - , , , :
Innovative manufacturing solutions for the efficient production of car bodies
In: Schmeing, K. (Hrsg.): Forming in Car Body Engineering 2015 2015
2014
- , , , , , :
Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics
In: Physics Procedia 56 (2014), S. 90-98
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.102
URL: http://www.sciencedirect.com/science/article/pii/S1875389214002478 - , , , :
Influence of Pre-straining and Heat Treatment on the Yield Surface of Precipitation Hardenable Aluminum Alloys
In: Physics Procedia 56 (2014), S. 1400-1409
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.070 - , , , :
Efficient Aluminum - Qualifizierung des Einsatzes höchstfester Aluminiumlegierungen im Karosseriebau
1. Green Factory Bavaria Kolloquium 2014 - Engergieeffiziente Produktion
In: Franke, J.; Kreitlein, S.; Hoeft, A. (Hrsg.): Tagungsband zum 1. Green Factory Bavaria Kolloquium 2014 - Engergieeffiziente Produktion 2014 - , , , , :
The correlation coefficient method: from the beginning to the development
Workshop Time-dependent Methods for the Evaluation of FLC
In: Institut für Virtuelle Produktion, ETH Zürich (Hrsg.): Workshop Time-dependent Methods for the Evaluation of FLC 2014 - , , , :
A Review on Tailored Blanks - Production, Applications and Evaluation
In: Journal of Materials Processing Technology 214 (2014), S. 151-164
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2013.08.015
2013
- Michael Lechner, Wolfgang Böhm, Hung Nguyen, Marion Merklein:
Fertigungsmethoden
In: Konstruktion 65 (2013), S. IW11-IW17
ISSN: 0720-5953 - , , , :
Herstellung maßgeschneiderter Aluminiumwerkstoffe
In: Konstruktion 11/12 (2013), S. 11-13
ISSN: 0720-5953 - , , , :
Optimization of the heat treatment layout and blank outline of THTB
In: Key Engineering Materials 554-557 (2013), S. 2465-2471
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.2465 - , , :
Comprehensive material characterization for an intermediate heat treatment
In: Key Engineering Materials 549 (2013), S. 39-44
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.39 - , , , :
Simulationsgestützte Auslegung maßgeschneiderter wärmebehandelter Aluminiumhalbzeuge
16. Workshop Simulation in der Umformtechnik
In: Tekkaya A. E.; Liewald M. (Hrsg.): 16. Workshop Simulation in der Umformtechnik 2013 - , , , :
Numerical optimisation of a shear specimen geometry according to ASTM
In: Key Engineering Materials 549 (2013), S. 317-324
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.317 - , :
Manufacturing flexibilisation of metal forming components by tailored blanks
Conf. Competitive Manufacturing (Stellenbosch)
In: D. Dimitrov; C. Schutte (Hrsg.): Proc. Conf. Competitive Manufacturing 2013 - , , :
Tailor Quenched Blanks
Danish-German Aerospace Collaboration Kick-Off - , , :
Druckversuch bei erhöhten Temperaturen
Werkstoffprüfung DGM
In: H.J. Christ (Hrsg.): Tagungsband Werkstoffprüfung DGM 2013
2012
- , , :
Tailoring Material Properties of Aluminum by Local Laser Heat Treatment
In: Physics Procedia 39 (2012), S. 232-239
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2012.10.034 - , :
Flexibilisierung der Fertigung umformtechnisch erzeugter Bauteile durch prozessangepasste Halbzeuge
11. Umformtechnisches Kolloquium Darmstadt (Bamberg)
In: P. Groche (Hrsg.): 11. Umformtechnisches Kolloquium Darmstadt 2012 - , :
Tailored solutions in mechanical engineering
In: Public Service Review (2012), S. 35-37
ISSN: 2046-5688 - , , :
Enhancement of formability of aluminum alloys in multi-stage forming operations by a local intermediate heat treatment
In: Production Engineering 6 (2012), S. 541-549
ISSN: 0944-6524
DOI: 10.1007/s11740-012-0407-5 - , , :
Trends in der Aluminiumumformung
Cluster-Forum Innovationen in der Aluminium-Umformtechnik
In: Tagungsband zum Cluster-Forum Innovationen in der Aluminium-Umformtechnik 2012 - , , , :
Tailored Heat Treated Profiles - Enhancement of the Forming Limit of Aluminum Profiles under Bending Load
In: Key Engineering Materials 504-506 (2012), S. 375-380
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.375
English