Merklein Marion
Prof. Dr.-Ing. habil. Marion Merklein
Department Maschinenbau (MB)
Lehrstuhl für Fertigungstechnologie (LFT, Prof. Merklein)
Egerlandstraße 13
91058 Erlangen
- Telefon: +49 9131 85-27140
- E-Mail: marion.merklein@fau.de
- Webseite: http://www.lft.fau.de/index.php/de/mitarbeiter/leitung
Mitarbeiterprofil
Mitglied der Arbeitsgemeinschaft Umformtechnik (AGU)
Mitglied der Deutschen Akademie der Technikwissenschaften (acatech)
Mitglied der Berlin-Brandenburgische Akademie der Wissenschaften (BBAW)
Fellow der Internationalen Akademie für Produktionstechnik (CIRP)
Mitglied im Center for Management Technology and Society (CMTS)
Mitglied der Nationalen Akademie der Wissenschaften (Leopoldina)
Mitglied der Wissenschaftlichen Gesellschaft für Produktionstechnik (WGP)
Editor des Journals Production Engineering 
Associate Editor des Journals of Materials Processing Technology
Standortsprecherin des DFG SFB TR285 „Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten“
Mitglied im International Standing Advisory Board der International Conference on Technology of Plasticity (ICTP)
Mitglied des Scientific Committee der Internationalen Konferenz SheMet (Int. Conference on Sheet Metal)
Mitglied des Scientific Committee der Internationalen Konferenz CHS² (Int. Conference on Hot Sheet Metal Forming of High-Performance Steel)
Kurator des Fraunhofer-Instituts für Integrierte Schaltungen IIS
Mitglied des Senats der Deutschen Forschungsgemeinschaft
Mitglied im Beirat der Bayerischen Forschungsstiftung
Mitglied im Auswahlausschuss für Humboldt-Forschungsstipendien der Alexander von Humboldt-Stiftung
Wissenschaftliche Geschäftsführerin der Neuen Materialien Fürth GmbH
Mitglied des Rates für Technologische Souveränität des BMBF
Mitglied des Österreichischen Beirats „Produktion der Zukunft“
Lehrveranstaltungen
Wintersemester 2024
Veröffentlichungen
2024
- , :
Evaluation of Crack Propagation During Cyclic Bending of Wire Strip
14th International Conference on the Technology of Plasticity (Mandelieu - La Napoule, 24. September 2023 - 29. September 2023)
In: Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan (Hrsg.): Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity, Cham: 2024
DOI: 10.1007/978-3-031-42093-1_18 - , , , , :
Artificial intelligence in metal forming
In: CIRP Annals - Manufacturing Technology (2024)
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2024.04.102 - , , , , :
Artificial Intelligence in manufacturing: State of the art, perspectives, and future directions
In: CIRP Annals - Manufacturing Technology (2024)
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2024.04.101 - , :
Investigation of the Tribological Impact of the Tool Radius on a Strip Drawing Test Rig With Redirection
9th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2024 (Nashville, TN, 27. Mai 2024 - 29. Mai 2024)
In: Daniel Casellas, Jens Hardell (Hrsg.): 9th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2024 - Proceedings 2024
DOI: 10.33313/512/B0201 - , :
Numerical springback prediction for high-strength aluminum alloys based on the sheet metal upsetting test
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2024)
ISSN: 0954-4054
DOI: 10.1177/09544054241289996 - , , , :
Tailored Heat Treatment Strategy for the Orbital Forming of Functional Components from EN AW-7075
DOI: 10.1007/978-3-031-41023-9_70
URL: https://link.springer.com/chapter/10.1007/978-3-031-41023-9_70 - , , , , , :
Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming
In: Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering (2024)
ISSN: 0954-4089
DOI: 10.1177/09544089241282807 - , :
Analysis of Multiaxial Tensile Stresses in Cold Forging Tools
14th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2023 (Kraków, POL, 25. Juni 2023 - 29. Juni 2023)
In: Jan Kusiak, Łukasz Rauch, Krzysztof Regulski (Hrsg.): Lecture Notes in Mechanical Engineering 2024
DOI: 10.1007/978-3-031-58006-2_1 - , :
Influence of Materials and Its Conditions on Pin-Extrusion from Sheet Metal
14th International Conference on Technology of Plasticity, ICTP 2023 (Mandelieu-La Napoule, 24. September 2023 - 29. September 2023)
In: Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan (Hrsg.): Lecture Notes in Mechanical Engineering 2024
DOI: 10.1007/978-3-031-41023-9_40 - , , , :
Cross-process chain influence of process variations in self-piercing riveting with regard to semi-finished product dimensions
In: Journal of Advanced Joining Processes 9 (2024), S. 1 - 13
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2024.100227 - , , , , :
Assessing single and multi-step friction stir consolidated recycled billets through uniaxial upsetting test
27th International ESAFORM Conference on Material Forming, ESAFORM 2024 (Toulouse, FRA, 24. April 2024 - 26. April 2024)
In: Anna Carla Araujo, Arthur Cantarel, France Chabert, Adrian Korycki, Philippe Olivier, Fabrice Schmidt (Hrsg.): Materials Research Proceedings 2024
DOI: 10.21741/9781644903131-310 - , , :
Investigation of Measures for Material Flow Control for a Backward Extrusion of Geared Components from Coil
14th International Conference on Technology of Plasticity, ICTP 2023 (Mandelieu-La Napoule, FRA, 24. September 2023 - 29. September 2023)
In: Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan (Hrsg.): Lecture Notes in Mechanical Engineering 2024
DOI: 10.1007/978-3-031-40920-2_4 - , :
Influence of material in sheet-bulk metal forming from coil
In: Production Engineering (2024)
ISSN: 0944-6524
DOI: 10.1007/s11740-024-01304-z - , :
Numerical and experimental investigation of extrusion processes from coil
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2024)
ISSN: 0954-4054
DOI: 10.1177/09544054241277593 - , , , , :
Characterization of an additively manufactured coating using an upsetting test with miniaturized cylindrical specimen
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2024)
ISSN: 1464-4207
DOI: 10.1177/14644207241277406 - , :
Impact of optical strain rate controlling on the determination of mechanical sheet metal properties
6th MATFEM Conference (Hohenkammer, 13. Mai 2024 - 14. Mai 2024) - , :
Influence of an optical strain rate controlled tensile testing method on mechanical properties of sheet metals
The 27th International ESAFORM Conference -On Material Forming (Toulouse, 24. April 2024 - 26. April 2024)
In: Material Forming The 27th International ESAFORM Conference -On Material Forming 2024
DOI: 10.21741/9781644903131-101 - , , , , , , , , , :
An approach for a metamodel-based consideration of a process chain when mechanically joining sheet metal components
15th Forming Technology Forum (Ohlstadt, 11. September 2024 - 12. September 2024) - , , , , , :
Process-Integrated Component Microtexturing for Tribologically Optimized Contacts Using the Example of the Cam Tappet—Numerical Design, Manufacturing, DLC-Coating and Experimental Analysis
In: Lubricants 12 (2024)
ISSN: 2075-4442
DOI: 10.3390/lubricants12080291 - , , , , :
Numerical simulation of sheet metal forming of an Al-Mg alloy incorporating plane strain properties in the yield criterion
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 238 (2024), S. 373-384
ISSN: 0954-4054
DOI: 10.1177/09544054221135388 - , , , , , :
Evaluation of the friction and wear behavior of a-C:H coatings for lubricant-reduced sheet metal forming
20th International Conference on Metal Forming, 2024 (Krakow, POL, 15. September 2024 - 18. September 2024)
In: Danuta Szeliga, Krzysztof Muszka (Hrsg.): Materials Research Proceedings 2024
DOI: 10.21741/9781644903254-71 - , :
Forming of lightweight helical gears by means of sheet-bulk metal forming
DOI: 10.21741/9781644903254-13 - , , , , :
Simulation-Based Investigation of the Heat Exchange Within a Partial Hot Stamping Process
14th International Conference on Technology of Plasticity, ICTP 2023 (Mandelieu-La Napoule, FRA, 24. September 2023 - 29. September 2023)
In: Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan (Hrsg.): Lecture Notes in Mechanical Engineering 2024
DOI: 10.1007/978-3-031-40920-2_13 - , , , :
Ultrasound-assisted material characterization: An innovative method for the non-destructive in-situ detection of microstructural changes of high-strength aluminum alloys
In: Journal of Materials Processing Technology 325 (2024), S. 1-12
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2023.118282
URL: https://www.sciencedirect.com/science/article/pii/S0924013623004272?ssrnid=4598800&dgcid=SSRN_redirect_SD - , :
Development of a novel forming tool for the production of high-strength aluminum components with tailored properties
In: IOP Conference Series: Materials Science and Engineering 1307 (2024), S. 012020
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1307/1/012020 - , :
Investigation of the Thermomechanical Properties During Hot Stamping of a Complex Phase Steel Carburized at Elevated Temperatures
9th International Conference on Hot Sheet Metal Forming of High-Performance Steel — CHS² 2024 (Nashville, Tenn., USA, 27. Mai 2024 - 29. Mai 2024)
In: Jens Hardell, Daniel Casellas (Hrsg.): Hot Sheet Metal Forming of High-Performance Steel 2024
DOI: 10.33313/512/A0101 - , , , :
Laser implantation of titanium-based particles into hot stamping tools for improving the tribological performance during hot sheet metal forming
14th International Conference on the Technology of Plasticity (Mandelieu-La Napoule, 24. September 2023 - 29. September 2023)
In: Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan (Hrsg.): Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity, Cham: 2024
DOI: 10.1007/978-3-031-41341-4_31 - , , , :
Corrosion behaviour of self-piercing riveted joints with uncoated rivets in high nitrogen steel
In: Production Engineering (2024)
ISSN: 0944-6524
DOI: 10.1007/s11740-024-01262-6 - , , , , , , :
A lightweight sensor ontology for supporting sensor selection, deployment, and data processing in forming processes
In: Production Engineering (2024)
ISSN: 0944-6524
DOI: 10.1007/s11740-024-01290-2 - , , , :
Investigation on the limp properties of formed foils for hydrogen applications
In: IOP Conference Series: Materials Science and Engineering 1307 (2024), Art.Nr.: 012031
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1307/1/012031
2023
- , , :
Fundamental Investigations to Evaluate the Influence of Notching Processes on a Subsequent Cyclic Bending Process for the Production of Wire Cores
In: Journal of Manufacturing and Materials Processing 7 (2023), S. 24
ISSN: 2504-4494
DOI: 10.3390/jmmp7010024 - , , , , , , , , :
Stability of Bipolar Plate Materials for Proton-Exchange Membrane Water Electrolyzers: Dissolution of Titanium and Stainless Steel in DI Water and Highly Diluted Acid
In: ChemElectroChem (2023)
ISSN: 2196-0216
DOI: 10.1002/celc.202300373 - , , , , , :
Numerical modelling of the process chain for aluminium Tailored Heat-Treated Profiles
In: Advanced Modeling and Simulation in Engineering Sciences 10 (2023), Art.Nr.: 8
ISSN: 2213-7467
DOI: 10.1186/s40323-023-00247-x - , , , , , , :
Hybrid process chains combining metal additive manufacturing and forming – A review
In: CIRP Journal of Manufacturing Science and Technology (2023), S. 98-115
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2023.08.002
URL: https://www.sciencedirect.com/science/article/pii/S1755581723001220 - , , :
Laser-based ultrasonic measurement of the influence of PBF-LB/M-typical thermal cycles on sheet metal components of hybrid parts
In: Production Engineering 63 (2023)
ISSN: 0944-6524
DOI: 10.1007/s11740-023-01210-w - , , , :
Additive und umformtechnische Fertigung hybrider Bauteile mit lokal angepassten Eigenschaften
Abschlusskolloquium des SFB 814 (Fürth, 13. Juni 2023 - 13. Juni 2023)
DOI: 10.5281/zenodo.8081865
URL: https://zenodo.org/record/8081865 - , , , , :
A unified model for isothermal and non-isothermal phase transformation in hot stamping of 22MnB5 steel
In: Journal of Materials Processing Technology 313 (2023), Art.Nr.: 117856
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2023.117856 - , :
Investigation of the influence of workpiece-side parameters on the layer formation of zinc-coated boron-manganese steel
20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-53 - , , :
Contact pressure-dependent friction compensation in upsetting tests with miniaturized specimens
20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-26 - , , :
Investigation on the shear cutting of functional components manufactured in an orbital forming process
20th International Conference on Sheet Metal, SheMet 2023 (Nuremberg, 3. April 2023 - 5. April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Paulo Martins, Gerson Meschut, Fabrizio Micari (Hrsg.): Materials Research Proceedings, Millersville PA, USA: 2023
DOI: 10.21741/9781644902417-8
URL: https://www.mrforum.com/product/9781644902417-8/ - , :
Stability of forming induced residual stresses in stainless steel components under mechanical load
In: Manufacturing Letters 35 (2023), S. 49-54
ISSN: 2213-8463
DOI: 10.1016/j.mfglet.2023.07.022 - , :
Stability of forming induced residual stresses in stainless steel parts at elevated temperature
ICRS11 - 11th International Conference on Residual Stresses (Nancy, 27. März 2022 - 30. März 2022)
URL: https://hal.univ-lorraine.fr/hal-04216289 - , :
Fatigue testing of cold forging tools using elastomer compression
In: CIRP Annals - Manufacturing Technology 72 (2023), S. 241-244
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2023.03.007 - , :
Simulation der Werkzeuglebensdauer bei Ermüdungsversagen
36. Jahrestreffen der Kaltmassivumformer 2023 (Düsseldorf, 15. Februar 2023 - 16. Februar 2023) - , :
Use of elastomers as pressure media for fatigue testing of cold forging tools
In: Procedia Structural Integrity 42 (2023), S. 66-71
DOI: 10.1016/j.prostr.2022.12.007
URL: https://www.sciencedirect.com/science/article/pii/S2452321622005649 - , , , , :
Characterization of friction stir consolidated recycled billet by uniaxial compression tests with miniaturized cylindrical specimen
26th International ESAFORM Conference on Material Forming, ESAFORM 2023 (Kraków, 19. April 2023 - 21. April 2023)
In: Lukasz Madej, Mateusz Sitko, Konrad Perzynsk (Hrsg.): Materials Research Proceedings 2023
DOI: 10.21741/9781644902479-215 - , , :
Numerical and experimental investigation of a backward extrusion process for forming geared components from coil
26th International ESAFORM Conference on Material Forming (Kraków, 19. April 2023 - 21. April 2023)
In: Materials Research Proceeding 2023
DOI: 10.21741/9781644902479-101 - , , , :
Experimental study of the potential for extending the process limits in multi-stage forming of micro gears from sheet metal by a local short-term laser heat treatment
Sheet Metal 2023 - 20th International Conference on Sheet Metal (Nürnberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings 2023 2023
DOI: 10.21741/9781644902417-38 - , , , , :
Ex-situ and in-situ investigations of the microstructural evolution of AA6082 aluminum alloy during heat treatment
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2023), Art.Nr.: 144828
ISSN: 0921-5093
DOI: 10.1016/j.msea.2023.144828
URL: https://www.sciencedirect.com/science/article/abs/pii/S0921509323002526?via=ihub - :
Nachhaltige Umformtechnik
In: VDI-Z Integrierte Produktion 165 (2023), S. 3-
ISSN: 0341-7255
DOI: 10.37544/0042-1766-2023-03-3 - , , , , , :
Mechanical joining of high-strength multi-material systems - trends and innovations
In: Mechanics & Industry 24 (2023), S. 1-20
ISSN: 2257-7777
DOI: 10.1051/meca/2023013 - , , , , :
Numerical investigation on the deep drawing of sheet metals with an additively applied coating
The 26th International ESAFORM Conference on Material Forming (Kraków, 19. April 2023 - 21. April 2023)
In: Lukasz Madej, Mateusz Sitko, Konrad Perzynsk (Hrsg.): Material Forming 2023
DOI: 10.21741/9781644902479-100 - , , , , , , , :
Alternating Additive Manufacturing and Forming - An Innovative Manufacturing Approach
In: Journal of Manufacturing and Materials Processing 7 (2023), S. 1-21
ISSN: 2504-4494
DOI: 10.3390/jmmp7030090 - , , , :
Evaluation of the properties of AA7020 tubes generated by a heat treatment based hydroforming process
SheMet2023
DOI: 10.21741/9781644902417-28 - , , , :
Investigation of Geometrical and Microstructural Influences on the Mechanical Properties of an Extruded AA7020 Tube
In: Lecture Notes in Production Engineering, 2023, S. 439-450
ISBN: 9783031183171
DOI: 10.1007/978-3-031-18318-8_45 - , , , :
Investigation of Geometrical and Microstructural Influences on the Mechanical Properties of an Extruded AA7020 Tube
In: Mathias Liewald; Alexander Verl; Thomas Bauernhansl; Hans-Christian Möhring (Hrsg.): Production at the Leading Edge of Technology, 2023, S. 439-450 (WGP: Congress of the German Academic Association for Production Technology)
ISBN: 9783031183171
DOI: 10.1007/978-3-031-18318-8_45 - , :
Comparison of forming processes for micro textured cups
51st SME North American Manufacturing Research Conference - , :
Comparison of forming processes for micro textured cups
In: Manufacturing Letters 35 (2023), S. 258-268
ISSN: 2213-8463
DOI: 10.1016/j.mfglet.2023.08.039 - , :
Wear Analysis of Micro Textured Coining Tools
XLI. Colloquium on Metal Forming - , , , :
Examination of controlled thermal radiation exchange for the production of tailored properties on press-hardened components
20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-56 - , , , :
Development of a novel in-situ measurement method for thermo-mechanically coupled material characterization of high-strength aluminum alloys
In: IOP Conference Series: Materials Science and Engineering (2023), S. 012042
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1284/1/012042 - , :
Characterization of the Tribological Behavior of Different Tool Coatings and Dry Lubricant for High-Strength Aluminum Alloys at Elevated Temperatures
In: Advanced Engineering Materials (2023), S. 1-12
ISSN: 1438-1656
DOI: 10.1002/adem.202201650 - , :
Erweiterung des Prozessfensters für das lokale Aufkohlen bei erhöhten Temperaturen eines pressgehärteten Komplexphasenstahls
18. Erlanger Workshop Warmblechumformung 2023 (Neue Materialien Fürth GmbH, 90762 Fürth, 14. November 2023)
In: M. Merklein (Hrsg.): Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung, Erlangen: 2023 - , , :
Carburization behavior at elevated temperatures and mechanical properties of a hot stamped complex phase steel
In: IOP Conference Series: Materials Science and Engineering 1284 (2023), S. 012003
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1284/1/012003
URL: https://iopscience.iop.org/article/10.1088/1757-899X/1284/1/012003 - , , :
Teilprojekt 4: Berücksichtigung funktionsrelevanter Gestaltabweichungen bei der Auslegung von Umformprozessen zur Herstellung von Stirnrädern mit Sonderverzahnung durch Fließpressen
In: Sandro Wartzack (Hrsg.): Abschlussbericht DFG-Forschungsgruppe FOR 2271, 2. Phase.Prozessorientiertes Toleranzmanagement mit virtuellen Absicherungsmethoden, Erlangen: FAU University Press, 2023, S. 85-112
ISBN: 978-3-96147-660-2
DOI: 10.25593/978-3-96147-660-2
URL: https://opus4.kobv.de/opus4-fau/frontdoor/index/index/docId/23413 - , :
Investigation on pin caulking as a versatile joining process
Sheet Metal 2023 - 20th International Conference on Sheet Metal (Nürnberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-14 - , , , :
Laser implantation of ceramic particles into hot working tool surfaces for improving the tribological performance within hot stamping
6th European Steel Technology and Application Days (Düsseldorf, 12. Juni 2023 - 16. Juni 2023) - , :
Definition and validation of a customized classification system for sheet metal bending parts
20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-40 - , , , , , , :
Influence of production process-induced surface topologies at varying roughness depths on the tribological properties of polyamide steel contact
In: Journal of Polymer Engineering 43 (2023), S. 187-197
ISSN: 0334-6447
DOI: 10.1515/polyeng-2022-0231 - , , , , , , , :
Innovative Process Strategies in Powder-Based Multi-Material Additive Manufacturing
In: Journal of Manufacturing and Materials Processing 7 (2023), S. 133
ISSN: 2504-4494
DOI: 10.3390/jmmp7040133 - , , , , , :
Unsupervised Deep Learning for Advanced Forming Limit Analysis in Sheet Metal: A Tensile Test-Based Approach
In: Materials 16 (2023), S. 7001
ISSN: 1996-1944
DOI: 10.3390/ma16217001 - , , , :
Approach for a sustainable process chain in manufacturing of fasteners for mechanical joining
20th International Conference on Sheet Metal (SheMet) 2023 (Nürnberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings, Millersville, PA, USA: 2023
DOI: 10.21741/9781644902417-49 - , , , :
Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material
14th International Conference on the Technology of Plasticity (ICTP) 2023 (Cannes, 24. September 2023 - 29. September 2023)
In: Mocellin, K., Bouchard, PO., Bigot, R., Balan, T. (Hrsg.): Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Cham: 2023
DOI: 10.1007/978-3-031-41341-4_8 - , , , :
Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets
In: Journal of Manufacturing and Materials Processing 7 (2023), S. 1 - 11
ISSN: 2504-4494
DOI: 10.3390/jmmp7060193 - , , :
Effect of a strain rate dependent material modeling of a steel on the prediction accuracy of a numerical deep drawing process
In: Production Engineering (2023)
ISSN: 0944-6524
DOI: 10.1007/s11740-023-01222-6 - , , :
Numerical study on local short-term heat treatments for joining by forming of high-strength 7xxx aluminum
In: Production Engineering (2023)
ISSN: 0944-6524
DOI: 10.1007/s11740-023-01205-7 - , :
Investigation of the Influence of Slightly Increased Process Temperatures on the Extrusion of Functional Aluminum Components in Sheet-Bulk Metal Forming
Congress of the German Academic Association for Production Technology (Freudenstadt, 20. November 2023 - 23. November 2023)
In: Thomas Bauernhansl, Alexander Verl, Mathias Liewald, Hans-Christian Möhring (Hrsg.): Production at the Leading Edge of Technology, Cham: 2023
DOI: 10.1007/978-3-031-47394-4_65 - , :
Analysis of the influence of a cold leveling process on the properties of multi-layered aluminum sheets
XLI. Verformungskundliches Kolloquium (Altenmarkt, 18. März 2023 - 21. März 2023) - , , , , , , :
Improvement of process control in sheet metal forming by considering the gradual properties of the initial sheet metal
In: SAGE Open (2023)
ISSN: 2158-2440
DOI: 10.1177/03093247231166035
URL: https://journals.sagepub.com/doi/abs/10.1177/03093247231166035
2022
- , , , :
Influence of dry ice blasting process properties on surface roughness and residual stresses of machined and additive manufactured workpieces
In: Procedia CIRP 108 (2022), S. 601-606
ISSN: 2212-8271
DOI: 10.1016/j.procir.2022.03.095 - , :
Interaction analysis of a notching and cyclic bending process
In: Manufacturing Letters 50th SME North American Manufacturing Research Conference (NMRC 50,2022) (2022), S. 167-173
ISSN: 2213-8463
DOI: 10.1016/j.mfglet.2022.07.022 - , , , , , , :
Joining by forming technologies: current solutions and future trends
In: International Journal of Material Forming 15 (2022)
ISSN: 1960-6206
DOI: 10.1007/s12289-022-01674-8 - , , , , , , , :
Alloy design and adaptation for additive manufacture
In: Journal of Materials Processing Technology 299 (2022), Art.Nr.: 117358
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2021.117358 - , , , , :
Influence of the forming process on springback
41st Annual Conference of the International-Deep-Drawing-Research-Group (IDDRG) (Lorient)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), BRISTOL: 2022
DOI: 10.1088/1757-899X/1238/1/012074 - , , , , , , :
Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites
In: Polymers 14 (2022), Art.Nr.: 5039
ISSN: 2073-4360
DOI: 10.3390/polym14225039 - , :
Investigations on sheet metal forming of hybrid parts in different stress states
In: Production Engineering (2022)
ISSN: 0944-6524
DOI: 10.1007/s11740-022-01171-6 - , :
Investigations on sheet metal forming of hybrid parts in different stress states
In: Production Engineering (2022)
ISSN: 0944-6524
DOI: 10.1007/s11740-022-01171-6 - , :
Investigation of the impact of process parameters on the layer formation of AlSi coated boron-manganese steel
International Deep-Drawing Research Group Conference (IDDRG 2022) (Lorient, 6. Juni 2022 - 10. Juni 2022)
DOI: 10.1088/1757-899X/1238/1/012010 - , :
Investigation of the impact of the layer formation of AlSi coated boron-manganese steel in regard to friction and wear
International Conference on Hot Sheet Metal Forming of High Performance Steel (Barcelona, 30. Mai 2022 - 2. Juni 2022) - , :
Werkstückseitige Beeinflussung und Modellierung der tribologischen Bedingungen beim Presshärten
2022
(Forschung in der Praxis, Bd.P 1291)
ISBN: 978-3-96780-147-7 - , , :
Entwicklung von Ansätzen zur Erweiterung der Prozessgrenzen in industrienahen Laborversuchen anhand einer Streifenzuganlage
17. Workshop Warmblechumformung (Fürth, 15. November 2022 - 15. November 2022)
In: Marion Merklein (Hrsg.): Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 17. Erlanger Workshop Warmblechumformung, Erlangen: 2022 - , , :
Investigation of tailored tool surfaces for improving the component quality of sheet-bulk metal forming parts produced by a combined deep-drawing and upsetting process
6th international Conference on Steels in Cars and Trucks (Mailand, 19. Juni 2022 - 23. Juni 2022)
In: SCT Conference Proceedings 2022 - , , :
Characterization of sheet metal components by using an upsetting test with miniaturized cylindrical specimen
In: CIRP Annals - Manufacturing Technology 71 (2022), S. 233-236
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2022.03.010 - , , :
Investigation of the Influence by Size Effects on the Material Characterization of the Uniaxial Compression Stress State
25th International Conference on Material Forming, ESAFORM 2022 (Braga, 27. April 2022 - 29. April 2022)
In: Gabriela Vincze, Frédéric Barlat (Hrsg.): Key Engineering Materials 2022
DOI: 10.4028/p-12whe6 - , , , , :
Potential of Orbital Formed Tailored Blanks for Industrial Application
Steel in Cars and Trucks (SCT) (Milano, 20. Juni 2022 - 23. Juni 2022) - , , :
Investigation on a quasi-incremental tool concept to manufacture functional components with sheet thickness gradient
12th Tooling 2022 Conference and Exhibition (Örebro, 25. April 2022 - 27. April 2022) - , , , :
Optical forming analysis of functional components manufactured in an orbital forming process
XL. Colloquium on Metal Forming (Zauchensee, Austria, 12. März 2022 - 15. März 2022) - , , , , , , , :
Consideration of the manufacturing history of sheet metal components for the adaptation of a clinching process
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022), S. 146442072210775
ISSN: 1464-4207
DOI: 10.1177/14644207221077560 - , :
Investigation and modeling of austenite grain growth of conventional hot stamping steel and its influence on microhardness
8th International Conference on Hot Sheet Metal Forming of High-Performance Steel (Barcelona, 30. Mai 2022 - 2. Juni 2022)
In: Mats Oldenburg, Jens Hardell, Daniel Casellas (Hrsg.): Hot Sheet Metal Forming of High-Performance Steel 2022 - , :
A novel ultrasonic-assisted staking process for mechanical fasteners
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022)
ISSN: 1464-4207
DOI: 10.1177/14644207221079999 - , :
Residual effects of ultrasonic assistance in metal forming
1st International Conference on Engineering Manufacture 2022 (EM 2022) (Porto, 5. Mai 2022 - 6. Mai 2022) - , :
Ultrasonic-assisted forming - Influence of unavoidably induced tool oscillations
XL. Conference on Metal Forming (Zauchensee, 12. März 2022 - 15. März 2022) - , :
Local prestressing of cold forging tools by reinforcements with adapted interference
International Conference on Fatigue Design (Senlis, 17. November 2021 - 18. November 2021)
DOI: 10.1016/j.prostr.2022.03.022
URL: https://www.sciencedirect.com/science/article/pii/S2452321622002359 - , :
Prestressing of cold forging tools for parts with functional elements
XL. Colloquium on Metal Forming (Zauchensee, 12. März 2022 - 16. März 2022)
In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Martin Stockinger (Hrsg.): XL. Colloquium on Metal Forming 2022 - , :
Prestressing of cold forging tools for parts with functional elements
(2022), S. 39 - 44 - , , :
Drawing Capability of High Formable Packaging Steel: Comparison of Limiting Drawing Ratio and Forming Limit Curve
25th International Conference on Material Forming, ESAFORM 2022 (Braga, PRT, 27. April 2022 - 29. April 2022)
In: Gabriela Vincze, Frédéric Barlat (Hrsg.): Key Engineering Materials 2022
DOI: 10.4028/p-40i67s - , , , , , , , :
Analysis of Distributed-Ledger-Technology for the Exchange of Design, Production and Simulation Data in Roll Forming
41st Annual Conference of the International-Deep-Drawing-Research-Group (IDDRG) (Lorient)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), BRISTOL: 2022
DOI: 10.1088/1757-899X/1238/1/012070 - , :
Determination of Forming Limit Curves - Strain Path and Failure Analysis
25th International Conference on Material Forming 2022 (ESAFORM 2022) (Braga, Portugal, 27. April 2022 - 29. April 2022)
In: Key Engineering Materials, Switzerland: 2022
DOI: 10.4028/p-up90fy - , :
Analysis of the Part Quality and Process Stability when Producing Metallic Micro Parts by Multi-Stage Bulk Forming from Sheet Metal
25th International Conference on Material Forming, ESAFORM 2022 (Braga, 27. April 2022 - 29. April 2022)
In: Gabriela Vincze, Frédéric Barlat (Hrsg.): Key Engineering Materials 2022
DOI: 10.4028/p-sl9j59 - , , , :
Material Characterization of Hybrid Components Manufactured by Laser-Based Directed Energy Deposition on Sheet Metal Substrates
The 25th International Conference on Material Forming (ESAFORM 2022) (Braga, 27. April 2022 - 29. April 2022)
DOI: 10.4028/p-3vlx01 - , , , :
Process-adapted temperature application within a two-stage rivet forming process for high nitrogen steel
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications 236 (2022), S. 1285 - 1301
ISSN: 1464-4207
DOI: 10.1177/14644207211068693 - , , , :
Investigation of the influence of material and sheet thickness on a three-stage process chain for cold forming of micro gears with a module of 0.1 mm
The 19th International Conference on Metal Forming (MF 2022) (Taiyuan, Shanxi, 11. September 2022 - 14. September 2022)
DOI: 10.1088/1757-899X/1270/1/012094
URL: https://iopscience.iop.org/article/10.1088/1757-899X/1270/1/012094 - , , :
Characterization and Modelling of Sheet Material with Graded Strength for More Accurate Finite Element Analysis
25th International Conference on Material Forming, ESAFORM 2022 (Braga, PRT, 27. April 2022 - 29. April 2022)
In: Gabriela Vincze, Frédéric Barlat (Hrsg.): Key Engineering Materials 2022
DOI: 10.4028/p-vqmjf9 - , :
Analysis of the evolution of the Lankford coefficient in uniaxial tensile tests and validation with grain structure analysis
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2022)
ISSN: 0954-4054
DOI: 10.1177/09544054221121914 - , :
Evaluation of testing methods for the characterization of material properties under plane strain
41st Annual Conference of the International-Deep-Drawing-Research-Group (IDDRG) (Lorient)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), BRISTOL: 2022
DOI: 10.1088/1757-899X/1238/1/012084 - , , , , , , , , , , , , , , , , , , , , , , , , :
Review on mechanical joining by plastic deformation
In: Journal of Advanced Joining Processes (2022)
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2022.100113 - , , , , , , :
Cyber-Physical Systems in the Context of Industry 4.0: A Review, Categorization and Outlook
In: Information Systems Frontiers (2022)
ISSN: 1387-3326
DOI: 10.1007/s10796-022-10252-x
URL: https://link.springer.com/article/10.1007/s10796-022-10252-x - , , , :
Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
In: Applied Sciences 12 (2022)
ISSN: 2076-3417
DOI: 10.3390/app12104962 - , , , , :
Numerical and experimental investigations on the mechanical properties of milled specimens from an AA7020 tube
In: Achievements and Trends in Material Forming, Trans Tech Publications Ltd., 2022 (Key Engineering Materials, Bd.926)
DOI: 10.4028/p-oxs247 - , :
Investigation on tool properties for the production of components with micro textured surfaces
International Deep-Drawing Research Group Conference (Lorient, France)
In: IOP Conference Series: Materials Science and Engineering 2022
DOI: 10.1088/1757-899x/1238/1/012060 - , , , :
Investigation on micro textured tappets from design and production to the application properties
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022)
ISSN: 1464-4207
DOI: 10.1177/14644207221124813 - , , , :
Tribological Behavior of High-Strength Aluminum Alloys in Combination with Dry Lubricants at High Forming Temperatures
In: Defect and Diffusion Forum 414 (2022), S. 125-130
ISSN: 1012-0386
DOI: 10.4028/p-27w89a
URL: https://www.scientific.net/DDF.414.125 - , , :
Effect of elevated tool temperatures on the properties of high-strength aluminum alloys during tailor quench forming (TQF)
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Volume 0 (2022), S. 1-10
ISSN: 0954-4054
DOI: 10.1177/09544054221135114 - , , , , , :
Influence of metal gear tooth geometry on load and wear within metal-polymer gear pairs
In: Applied Sciences 12 (2022), Art.Nr.: 270
ISSN: 2076-3417
DOI: 10.3390/app12010270 - , , , :
Experimental Evaluation of the Feasibility and Reproducibility of a Novel Multi-step Forming Process for Cu-OFE Micro Gear Manufacturing Compared to Macro-scale Forming
In: Manufacturing Letters 50th SME North American Manufacturing Research Conference (NAMRC 50,2022) (2022), S. 183-189
ISSN: 2213-8463
DOI: 10.1016/j.mfglet.2022.07.024 - , :
Influence of Metal Flank Hardness of Machined and Cold Forged Gears on Wear within a Metal-Polyamide Gear Pair and Targeted Process Adaptation
In: Journal of Materials Engineering and Performance (2022)
ISSN: 1059-9495
DOI: 10.1007/s11665-022-07251-z - , , , , :
Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
In: Journal of Manufacturing and Materials Processing 6 (2022), S. 127
ISSN: 2504-4494
DOI: 10.3390/jmmp6060127 - , , :
Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022)
ISSN: 1464-4207
DOI: 10.1177/14644207221081408 - , :
Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design
12th Tooling Conference and Exhibition Tooling 2022 (Örebro, 25. April 2022 - 27. April 2022) - , , , , :
Robustness Analysis of Pin Joining
In: Journal of Manufacturing and Materials Processing 6 (2022), Art.Nr.: 122
ISSN: 2504-4494
DOI: 10.3390/jmmp6050122 - , , , :
Investigation on the thermo-mechanical properties of hot stamped parts by using laser-implanted tool surfaces
The 19th International Conference on Metal Forming 2022 (Taiyuan, 11. September 2022 - 14. September 2022)
In: IOP Conf. Ser.: Mater. Sci. Eng. 1270 012114 2022
DOI: 10.1088/1757-899X/1270/1/012114 - , , , , :
Discontinuous laser dispersing of titanium nitride based hard ceramic particles for improving the tribological behavior of hot stamping tools
8th International Conference on Hot Sheet Metal Forming of High-Performance Steel (Barcelona, 30. Mai 2022 - 2. Juni 2022)
In: Oldenburg M, Hardell J, Casellas D (Hrsg.): Hot Sheet Metal Forming of High-Performance Steel 2022 - , , , :
Tribological and thermal behavior of laser implanted tool surfaces for hot stamping AlSi coated 22MnB5 sheets
In: Defect and Diffusion Forum 414 (2022), S. 69-74
ISSN: 1012-0386
DOI: 10.4028/p-e4i60t - , , , , , :
Hydroforming of High-Strength Aluminum Tubes with Thermo-Mechanical Manufacturing Processes
In: Engineering Proceedings 26 (2022), Art.Nr.: 13
ISSN: 2673-4591
DOI: 10.3390/engproc2022026013 - , :
Shear-clinching of the high-strength aluminum alloy AA7075 with laser-assisted retrogression
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2022)
ISSN: 0954-4054
DOI: 10.1177/09544054221135103 - , :
Influence of Tailored Surfaces on the Surface Properties of Sheet-Bulk Metal Formed Parts
Steel in Cars and Trucks (SCT) (Milano, 20. Juni 2022 - 23. Juni 2022)
In: Proceedings of the Steel in Cars and Trucks (SCT) 2022 - , , , , :
Investigation of the direct recyclability of chip waste by cold cup extrusion and identification of its potential in continuous processes
Forming Technology Forum 2022 (Universität Twente, Enschede, 21. September 2022 - 22. September 2022) - , :
Investigation of the tensile response and the microstructural evolution during hot drawing of multi-layered, ultrafine-grained AA6014 sheets by thermomechanical analyzes
In: IOP Conference Series: Materials Science and Engineering 1238 (2022)
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1238/1/012009
URL: https://iopscience.iop.org/article/10.1088/1757-899X/1238/1/012009 - , , , :
Investigation of the joinability of single- and multi-layered AA6014 sheets produced by accumulative roll bonding in the shear-clinching process
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022)
ISSN: 1464-4207
DOI: 10.1177/14644207211069263
2021
- , , , , , , , :
On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing
In: Journal of Materials Processing Technology 288 (2021), Art.Nr.: 116840
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116840 - , :
Evaluation of Material Behavior for Wire Strip under Cyclic Bending Load and Preparation of an Experimental Test Method
24th International Conference on Material Forming. (Liège, Belgium, 14. April 2021 - 16. April 2021)
In: Paper presented at ESAFORM 2021 2021
DOI: 10.25518/esaform21.3826
URL: https://popups.uliege.be/esaform21/index.php?id=3826 - , :
Material Model for the Production of Steel Fibers by Notch Rolling and Fulling
19th International Conference on Sheet Metal (SheMet 2021) (Erlangen, 29. März 2021 - 31. März 2021)
In: Merklein, M.; Duflou, J.; Fratini, L.; Hagenah, H.; Martins, P.; Meschut, G.; Micari, F. (Hrsg.): Key Engineering Materials, Zurich, Switzerland: 2021
DOI: 10.4028/www.scientific.net/KEM.883.277 - , , , :
Forming of metal-based composite parts
In: CIRP Annals - Manufacturing Technology (2021)
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2021.05.009 - , , , :
Assessment of springback behaviour of 800-1200 mpa dual-phase steel grades
19th International Conference on Sheet Metal, SheMet 2021 (Virtual, Online, 29. März 2021 - 31. März 2021)
In: Key Engineering Materials 2021
DOI: 10.4028/www.scientific.net/KEM.883.151 - , , , , , , :
Enhancement of springback prediction of AHSS parts by advanced friction modelling
40th International Deep-Drawing Research Group Conference (IDDRG)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012033 - , , , , :
Towards an holistic account on residual stresses in full-forward extruded rods: Experiment, modeling and simulation of forming and operation phases
In: Archive of Applied Mechanics (2021)
ISSN: 0939-1533
DOI: 10.1007/s00419-021-01917-1 - , , , , , , , , , , , :
Strategies for residual stress adjustment in bulk metal forming
In: Archive of Applied Mechanics (2021)
ISSN: 0939-1533
DOI: 10.1007/s00419-021-01903-7 - , , , , :
Surface modification of additively manufactured parts by forming
ESAFORM 2021 (Liège, 14. April 2021 - 16. April 2021)
DOI: 10.25518/esaform21.2124 - , , :
Influence of Stress States on Forming Hybrid Parts with Sheet Metal and Additively Manufactured Element
In: Journal of Materials Engineering and Performance (2021)
ISSN: 1059-9495
DOI: 10.1007/s11665-021-05674-8 - , , , :
Stretch Forming of Ti-6Al-4V Hybrid Parts at Elevated Temperatures
19th International Conference on Sheet Metal (Shemet 2021) (Erlangen, 29. März 2021 - 31. März 2021)
In: Merklein, M.; Duflou, J.; Fratini, L.; Hagenah, H.; Martins, P.; Meschut, G.; Micari, F. (Hrsg.): Sheet Metal 2021, Zürich: 2021
DOI: 10.4028/www.scientific.net/KEM.883.135 - , , , :
Investigations of batch fluctuation regarding tribological conditions in series production of car body parts
In: International Journal of Material Forming (2021)
ISSN: 1960-6206
DOI: 10.1007/s12289-020-01600-w - , :
Investigation of the impact of heat treatment on the layer formation of AlSi-coated boron-manganese steel
40th International Deep-Drawing Research Group Conference (IDDRG)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012009 - , :
Untersuchung des Einflusses von werkstückseitigen Parametern auf die Schichtausbildung von zinkbeschichtetem Bor-Manganstahl
16. Workshop Warmblechumformung (Fürth, 9. November 2021 - 9. November 2021)
In: Marion Merklein (Hrsg.): Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 16. Erlanger Workshop Warmblechumformung, Erlangen: 2021 - , , , , :
Constitutive Friction Law for the Description and Optimization of Tailored Surfaces
In: Merklein, M. Tekkaya, A. E. Behrens, B.-A. (Hrsg.): Sheet Bulk Metal Forming, Cham: Springer Nature Switzerland, 2021, S. 307 - 333 (Lecture Notes inProduction Engineering)
ISBN: 978-3-030-61901-5
DOI: 10.1007/978-3-030-61902-2_14 - , , , :
Determination of the biaxial anisotropy coefficient using a single layer sheet metal compression test
19th International Conference on Sheet Metal, SheMet 2021
DOI: 10.4028/www.scientific.net/KEM.883.303 - , , :
Joining of hybrid semi-finished products from sheet metal by orbital forming
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2021), S. 1-9
ISSN: 1464-4207
DOI: 10.1177/14644207211067649 - , , :
Influence of a local short-term heat treatment on the formability of orbital formed functional components
In: Procedia Manufacturing 53 (2021), S. 72-79
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2021.06.012 - , , , , , , , , , :
Functional Analysis of Components Manufactured by a Sheet-Bulk Metal Forming Process
In: Journal of Manufacturing and Materials Processing 5 (2021), S. 1-18
ISSN: 2504-4494
DOI: 10.3390/jmmp5020049 - , , , , , , , , , , , , , , , :
Fringe projection profilometry in production metrology: A multi-scale comparison in sheet-bulk metal forming
In: Sensors 21 (2021), Art.Nr.: 2389
ISSN: 1424-8220
DOI: 10.3390/s21072389 - , :
Analysis of the thermomechanical flow behavior of carburized sheet metal in hot stamping
13th International Conference on the Technology of Plasticity (ICTP) (Columbus, OH, USA, 25. Juli 2021 - 30. Juli 2021)
In: Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y (Hrsg.): Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity 2021
DOI: 10.1007/978-3-030-75381-8_65 - , :
Bending behavior of a hot stamped complex phase steel with tailored properties by local carburization
40th International Deep-Drawing Research Group Conference (IDDRG) (Stuttgart)
In: IOP Conference Series: Materials Science and Engineering 1157 2021
DOI: 10.1088/1757-899X/1157/1/012011 - , :
Investigation of the Microstructural Evolution during Hot Stamping of a Carburized Complex Phase Steel by Laser-Ultrasonics
In: Materials 14 (2021), Art.Nr.: 1836
ISSN: 1996-1944
DOI: 10.3390/ma14081836 - , , , , , , :
Systematic exploration of the L-PBF processing behavior and resulting properties of β-stabilized Ti-alloys prepared by in-situ alloy formation
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 818 (2021), Art.Nr.: 141374
ISSN: 0921-5093
DOI: 10.1016/j.msea.2021.141374 - , , , :
Component residual stress control in forward rod extrusion by material flow and tribology—experiments and modeling
In: Forschung Im Ingenieurwesen-Engineering Research (2021)
ISSN: 0015-7899
DOI: 10.1007/s10010-021-00509-3 - , :
Influence of Material Delivery Condition on Residual Stresses and Part Properties During Forward Rod Extrusion
13th International Conference on the Technology of Plasticity (Grignano, 25. Juli 2021 - 30. Juli 2021)
DOI: 10.1007/978-3-030-75381-8_191 - , :
Influence of Ultrasonic Assistance on the Forming Limits of Steel
13th International Conference on the Technology of Plasticity, ICTP 2021 (Virtual, Online, 25. Juli 2021 - 30. Juli 2021)
In: Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida (Hrsg.): Minerals, Metals and Materials Series 2021
DOI: 10.1007/978-3-030-75381-8_106 - , :
Investigation of a novel ultrasonic-assisted staking process for mechanical fasteners
2nd International Conference on Advanced Joining Processes AJP 2021 (Sintra, 21. Oktober 2021 - 22. Oktober 2021) - , :
Analysis of stress pins for the local prestressing of cold forging tools
In: Production Engineering 15 (2021), S. 119-131
ISSN: 0944-6524
DOI: 10.1007/s11740-020-01012-4 - , , :
Influence of specimen geometry and strain rate on elongation in tensile testing of packaging steel
24th International ESAFORM Conference on Material Forming, ESAFORM 2021 (Virtual, Online, BEL, 14. April 2021 - 16. April 2021)
In: ESAFORM 2021 - 24th International Conference on Material Forming 2021
DOI: 10.25518/esaform21.3876 - , , :
Local strain measurement in tensile test for an optimized characterization of packaging steel for finite element analysis
19th International Conference on Sheet Metal, SheMet 2021 (Virtual, Online, 29. März 2021 - 31. März 2021)
In: Key Engineering Materials 2021
DOI: 10.4028/www.scientific.net/KEM.883.309 - , :
Alternative characterization method for the failure behavior of sheet metals derived from Nakajima test
40th International Deep-Drawing Research Group Conference (IDDRG)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012046 - , , :
Contact pressure-dependent friction characterization by using a single sheet metal compression test
In: Wear (2021), Art.Nr.: 203679
ISSN: 0043-1648
DOI: 10.1016/j.wear.2021.203679 - , :
Bulk Microforming from Sheet Metal—A Promising Approach for the Mass Production of Cold-Formed Metallic Micro Parts
13th International Conference on the Technology of Plasticity, ICTP 2021 (, 25. Juli 2021 - 30. Juli 2021)
In: Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida (Hrsg.): Minerals, Metals and Materials Series 2021
DOI: 10.1007/978-3-030-75381-8_12 - , :
Bulk Microforming from Sheet Metal—A Promising Approach for the Mass Production of Cold-Formed Metallic Micro Parts
The 13th International Conference on the Technology of Plasticity (Virtual Event, 25. Juli 2021 - 30. Juli 2021)
In: Glenn Daehn, Jian Cao, Prof. Dr. Brad Kinsey, Prof. Dr. Erman Tekkaya, Anupam Vivek, Dr. Yoshinori Yoshida (Hrsg.): Proceedings of the 13th International Conference on the Technology of Plasticity 2021
DOI: 10.1007/978-3-030-75381-8_12
URL: https://www.springerprofessional.de/bulk-microforming-from-sheet-metal-a-promising-approach-for-the-/19350484 - , :
Erratum: “Potential of joining dissimilar materials by cold formed pin-structures” (Journal of Materials Processing Tech. (2020) 283, (S0924013620301114), (10.1016/j.jmatprotec.2020.116697))
In: Journal of Materials Processing Technology 294 (2021), Art.Nr.: 117134
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2021.117134 - , :
Investigation of Size Effects in Multi-Stage Cold Forming of Metallic Micro Parts from Sheet Metal
In: Micromachines 12 (2021)
ISSN: 2072-666X
DOI: 10.3390/mi12121561 - , , :
Investigation of the Potential for the Fabrication and Forming of Adaptronic Semi-finished Parts Joined by Cold Formed Pin Structures
2ND INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES (AJP 2021) (Sintra, 21. Oktober 2021 - 22. Februar 2022) - , , , :
Selective application of different forming temperatures for individual process stages in a rivet manufacturing process with high nitrogen steel
2nd International Conference on Advanced Joining Processes (Sintra, 21. Oktober 2021 - 22. Oktober 2021) - , , , , , :
Relevanzanalyse zur Berücksichtigung der kinematischen Verfestigung in Tiefziehprozessen mit geschlossenem Profil
Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2021
(EFB-Forschungsbericht)
ISBN: 978-3-86776-610-4 - , , , , , :
Blockchain-Systeme für den manipulationssicheren Datenaustausch in der industriellen Fertigung: Distributed Ledgers für den Materialdatenaustausch
In: wt Werkstattstechnik - Online 111 (2021), S. 857-862
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2021-11-12-88 - , , , , , :
Distributed Ledgers für den Materialdatenaustausch
In: wt Werkstattstechnik - Online 111 (2021), S. 857 - 862
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2021-11-12-87 - , :
Influence of the strain dependent material behaviour under plane strain on the yield locus modelling
40th International Deep-Drawing Research Group Conference (IDDRG)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012062 - , , :
Experimental analysis of the influence of the embossing and upsetting process on joint strength in resistance element welding with upset auxiliary joining elements
40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012002 - , :
Analyse des Einflusses der tribologischen Eigenschaften auf die Tiefziehbarkeit metallischer Blechwerkstoffe nach dem Durchlauf einer Ziehsicke
(2021)
(anderer) - , , , , , :
Additive Fertigung eines hybriden Planetenträgers
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 116 (2021), S. 478-482
ISSN: 0932-0482
DOI: 10.1515/zwf-2021-0124 - , , , , , :
Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
In: Applied Composite Materials (2021)
ISSN: 0929-189X
DOI: 10.1007/s10443-021-09892-0 - , :
Investigation on tailored blanks in a full forward extrusion process of sheet-bulk metal forming
24th International ESAFORM Conference on Material Forming (Liege, 14. April 2021 - 16. April 2021)
In: ESAFORM 2021 2021
DOI: 10.25518/esaform21.3673
URL: https://popups.uliege.be/esaform21/index.php?id=3673 - , , , , :
Forming of complex functional elements on sheet metal
In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Hrsg.): Sheet Bulk Metal Forming, Springer Nature Switzerland AG, 2021
DOI: 10.1007/978-3-030-61902-2_2 - , :
Numerical and experimental investigations for distortion-reduced laser heat treatment of aluminum
In: Production Engineering (2021)
ISSN: 0944-6524
DOI: 10.1007/s11740-021-01029-3 - , , :
Comparison of different forming methods on deep drawing and springback behavior of high-strength aluminum alloys
40th International Deep-Drawing Research Group Conference (IDDRG) (ELECTR NETWORK)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012048 - , , :
Adapted tool design for the cold forging of gears from non-ferrous and light metals
In: International Journal of Advanced Manufacturing Technology (2021)
ISSN: 0268-3768
DOI: 10.1007/s00170-020-06449-6 - , , :
Influence of the forming induced hardening on the wear behavior of aluminum gears within a metal-plastic material pairing and targeted adaption
49th SME North American Manufacturing Research Conference, NAMRC 2021 (Cincinnati, OH, 21. Juni 2021 - 25. Juni 2021)
In: Livan Fratini, Ihab Ragai (Hrsg.): Procedia Manufacturing 2021
DOI: 10.1016/j.promfg.2021.06.078 - , , :
Forming of Components with Microgearings from Coil Material—Numerical Modeling of the Process Chain and Experimental Validation
In: Micromachines 12 (2021), S. 1456
ISSN: 2072-666X
DOI: 10.3390/mi12121456 - , , :
Experimental Study on Joining by Forming of HCT590X+Z and EN-AW 6014 Sheets Using Cold Extruded Pin Structures
In: Journal of Manufacturing and Materials Processing 5 (2021)
ISSN: 2504-4494
DOI: 10.3390/jmmp5010025 - , , :
Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements
Sheet Metal 2021 (Online, 29. März 2021 - 31. März 2021)
DOI: 10.4028/www.scientific.net/KEM.883.19 - , , :
Investigation of the Influence of Formed, Non-rotationally Symmetrical Pin Geometries and their Effect on the Joint Quality of Steel and Aluminum Sheets by Direct Pin Pressing
AJP 2021, 2ND INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES (Sintra, 21. Oktober 2021 - 22. Oktober 2021)
In: AJP2021 2021
DOI: 10.1177/14644207221081408 - , , , :
Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
In: Production Engineering (2021)
ISSN: 0944-6524
DOI: 10.1007/s11740-021-01093-9 - , , , , :
Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes
International Deep-Drawing Research Group Conference (IDDRG 2021) (Stuttgart, Germany, 21. Juni 2021 - 2. Juli 2021)
In: IOP Publishing Ltd (Hrsg.): IOP Conference Series 2021
DOI: 10.1088/1757-899X/1157/1/012077 - , , , :
Investigation of the thermal and tribological performance of localized laser dispersed tool surfaces under hot stamping conditions
In: Wear (2021), Art.Nr.: 203694
ISSN: 0043-1648
DOI: 10.1016/j.wear.2021.203694 - , :
Analysis of Work Hardening and Tribological Changes After a Gap Controlled Drawbead Passage
ICTP (Columbus, Ohio, USA)
In: The Minerals, Metals & Materials Series. Springer, Cham. 2021
DOI: 10.1007/978-3-030-75381-8 - , , , :
Influence of the rivet coating on the friction during self-piercing riveting
In: Key Engineering Materials 883 (2021), S. 11-18
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.883.11 - , , , :
Self-piercing riveting using rivets made of stainless steel with high strain hardening
13th International Conference on the Technology of Plasticity (, 25. Juli 2021 - 30. Juli 2021)
In: Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y (Hrsg.): Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., Cham: 2021
DOI: 10.1007/978-3-030-75381-8_124 - , , , :
Strength of self-piercing riveted joints with conventional rivets and rivets made of high nitrogen steel
ESAFORM 2021 - 24th International Conference on Material Forming (Liège, 14. April 2021 - 16. April 2021)
DOI: 10.25518/esaform21.1911 - , , , :
Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet–Bulk Metal Forming Process
13th International Conference on the Technology of Plasticity, ICTP 2021 (Virtual, Online, 25. Juli 2021 - 30. Juli 2021)
In: Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y (Hrsg.): Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity, Cham: 2021
DOI: 10.1007/978-3-030-75381-8_46 - , , , :
Process Combination for the Manufacturing of Toothed, Thin-Walled Functional Elements by Using Process Adapted Semi-finished Products
DOI: 10.1007/978-3-030-61902-2_1 - , :
Investigation of the joinability of the high-strength aluminum alloy AA7075 in shear-clinching processes
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2021)
ISSN: 1464-4207
DOI: 10.1177/14644207211067935 - , :
Joinability of the High-strength Aluminium Alloy AA7075 in Shear-clinching Processes
2nd International Conference on Advanced Joining Processes AJP 2021 (Sintra, 21. Oktober 2021 - 22. Oktober 2021) - , :
Potential of shear-clinching technology for joining of three sheets
In: Journal of Advanced Joining Processes 3 (2021), S. 100043
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2021.100043 - , , , :
Analysis of the Influence of Surface Modifications on the Fatigue Behavior of Hot Work Tool Steel Components
In: Materials 14 (2021), S. 7324
ISSN: 1996-1944
DOI: 10.3390/ma14237324 - , :
Robot-assisted surface treatment strategies of AA6014 sheet metal for accumulative roll bonding
24th International ESAFORM Conference on Material Forming, ESAFORM 2021 (Virtual, 14. April 2021 - 16. April 2021)
In: ESAFORM 2021 - 24th International Conference on Material Forming 2021
DOI: 10.25518/esaform21.3831
2020
- , , , , :
Modelling of Hybrid Parts Made of Ti-6Al-4V Sheets and Additive Manufactured Structures
Production at the leading edge of technology - Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP) (Dresden (digital), 23. September 2020 - 24. September 2020)
In: Behrens, Bernd-Arno; Brosius, Alexander; Hintze, Wolfgang; Ihlenfeldt, Steffen; Wulfsberg, Jens Peter (Hrsg.): Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Berlin, Heidelberg: 2020
DOI: 10.1007/978-3-662-62138-7_2 - , , , , , , , , , , , :
Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
In: Measurement Science and Technology 31 (2020), S. 1-14
ISSN: 1361-6501
DOI: 10.1088/1361-6501/ab89e2 - , , , :
Konstitutives Reibgesetz zur Beschreibung und Optimierung von Tailored Surfaces
23. Umformtechnisches Kolloquium Hannover: Aktuelle Entwicklungen im Bereich der Umformtechnik (Hannover) - , :
Investigation on extrusion processes in sheet-bulk metal forming from coil
In: CIRP Journal of Manufacturing Science and Technology (2020)
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2020.08.007 - , :
Investigation on the wear behavior of coatings for lubricant-free deep drawing processes with a novel application-oriented test rig
In: Defect and Diffusion Forum 404 DDF (2020), S. 11-18
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.11 - , :
Measures for controlling the material flow when extruding sheet-bulk metal forming parts from coil
In: Manufacturing Review 7 (2020)
ISSN: 2265-4224
DOI: 10.1051/mfreview/2020033 - , , , , , , , , , :
Lubricant free forming with tailored tribological conditions
In: Dry Metal Forming Open Access Journal 6 (2020), S. 228-261
Open Access: https://www.trockenumformen.de/app/download/10606371/DMFOAJ_6_2020_228-261_Henneberg.pdf
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5eecb95410d59 - , , :
Investigation of the Springback Behaviour of High-strength Aluminium Alloys Based on Cross Profile Deep Drawing Tests
23rd International Conference on Material Forming, ESAFORM 2020 (Cottbus, 4. Mai 2020 - 8. April 2020)
In: Markus Bambach (Hrsg.): Procedia Manufacturing 2020
DOI: 10.1016/j.promfg.2020.04.187 - , , :
Enhancement of the Forming Limits for Orbital Formed Tailored Blanks by Local Short-term Heat Treatment
In: Procedia Manufacturing 47 (2020), S. 1197-1202
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.04.177 - , , , , :
Investigation of the Phase Transformation in Hot Stamping Processes with Regard to the Testing Facility
Congress of the German Academic Association for Production Technology WGP 2021 (Dresden, 28. September 2021 - 1. Oktober 2021)
DOI: 10.1007/978-3-662-62138-7_8 - , :
Functional optimization of hot-stamped components by local carburization
In: International Journal of Lightweight Materials and Manufacture 3 (2020), S. 43-54
ISSN: 2588-8404
DOI: 10.1016/j.ijlmm.2019.09.002 - , , , :
Temporal and spatial detection of the onset of local necking and assessment of its growth behavior
In: Materials 13 (2020), Art.Nr.: 2427
ISSN: 1996-1944
DOI: 10.3390/ma13112427 - , :
Applicability of Solid Lubricant Coatings in Cold Rod Extrusion of Stainless Steels
In: Defect and Diffusion Forum (2020), S. 95-100
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.95 - , :
Investigation of thermal effects during ultrasonic-assisted upsetting
In: Procedia Manufacturing 50 (2020), S. 220-225
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.08.041
URL: https://www.sciencedirect.com/science/article/pii/S235197892031739X - , , , , , :
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
Material Science and Engineering Congress - MSE 2020 (Darmstadt, 22. September 2020 - 25. September 2020) - , :
Analysis of the stress state in non-axially symmetrical cold forging dies
In: Procedia Manufacturing 50 (2020), S. 307-313
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.08.057
URL: https://www.sciencedirect.com/science/article/pii/S2351978920317558 - , :
Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures
In: Journal of Materials Processing Technology 283 (2020), Art.Nr.: 116697
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116697 - , , , , :
Influence of the process temperature on the forming behaviour and the friction during bulk forming of high nitrogen steel
In: Journal of Advanced Joining Processes 1 (2020), S. 100023
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2020.100023 - , , , :
Process design for the forming of semi-tubular self-piercing rivets made of high nitrogen steel.
In: Procedia Manufacturing 50 (2020), S. 280-285
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.08.052 - , , , , , , :
Blockchain in sheet metal processing.
In: wt Werkstattstechnik - Online 110 (2020), S. 704-708
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2020-10-60 - , , :
Analytical friction force compensation of flow curves out of layer compression tests with the pin extrusion test
In: International Journal of Material Forming (2020)
ISSN: 1960-6206
DOI: 10.1007/s12289-020-01555-y - , , :
Characterization of kinematic hardening with a hydraulic bulge test
18th International Conference on Metal Forming 2020
In: Procedia Manufacturing (Hrsg.): Procedia Manufacturing, Special Issue 2020
DOI: 10.1016/j.promfg.2020.08.125 - , , :
An Innovative Process Combination of Additive Manufacturing and Sheet Bulk Metal Forming for Manufacturing a Functional Hybrid Part
In: Journal of Materials Processing Technology (2020), S. 117032
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.117032 - , , , , , , :
Additive Fertigung für industrielle Anwendungen - Entwicklung einer Auswahlsystematik für Bauteile zur Generierung funktionalen Mehrwerts mittels additiver Fertigung
In: Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse 2020 (2020), S. 50-54
ISSN: 1434-1980
DOI: 10.30844/I40M_20-4_S50-54 - , :
Processing of 316L hybrid parts consisting of sheet metal and additively manufactured element by Powder Bed Fusion using a laser beam
11th CIRP Conference on Photonic Technologies, LANE 2020 (, 7. September 2020 - 10. September 2020)
In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
DOI: 10.1016/j.procir.2020.09.008 - , , :
Extension of the forming limits of extrusion processes in sheet-bulk metal forming for production of minute functional elements
In: Manufacturing Review 7 (2020), Art.Nr.: 9
ISSN: 2265-4224
DOI: 10.1051/mfreview/2020003 - , , , , :
Modeling material behavior of AA5083 aluminum alloy sheet using biaxial tensile tests and its application in numerical simulation of deep drawing
In: International Journal of Advanced Manufacturing Technology 106 (2020), S. 1133-1148
ISSN: 0268-3768
DOI: 10.1007/s00170-019-04587-0
URL: https://link.springer.com/content/pdf/10.1007/s00170-019-04587-0.pdf - , :
Experimental investigation of distortion behavior of laser heat treated blanks
11th CIRP Conference on Photonic Technologies, LANE 2020 (, 7. September 2020 - 10. September 2020)
In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
DOI: 10.1016/j.procir.2020.09.074 - , , , , :
Ausgewählte Einflussgrößen auf die erzielbaren Verzahnungstoleranzen beim Kaltfließpressen.
In: Sandro Wartzack (Hrsg.): Summer School Toleranzmanagement - Beiträge zur 4. Summer School - September 2020, Erlangen: 2020 - , , , :
Laser implantation of niobium and titanium-based particles on hot working tool surfaces for improving the tribological performance within hot stamping
The A-coatings (Lehrstuhl für Fertigungstechnologie, Friedrich-Alexander-Universität Erlangen-Nürnberg, 16. November 2020 - 20. November 2020)
In: Defect and Diffusion Forum 2020
DOI: 10.4028/www.scientific.net/DDF.404.117 - , , , :
Localized dispersing of TiB2 and TiN particles via pulsed laser radiation for improving the tribological performance of hot stamping tools
11th CIRP Conference on Photonic Technologies, LANE 2020 (, 7. September 2020 - 10. September 2020)
In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
DOI: 10.1016/j.procir.2020.09.069 - , , , :
Localized Laser Dispersing of Titanium-Based Particles for Improving the Tribological Performance of Hot Stamping Tools
In: Journal of Manufacturing and Materials Processing 4 (2020), Art.Nr.: 4030068
ISSN: 2504-4494
DOI: 10.3390/jmmp4030068 - , , , :
Verbesserung des tribologischen Einsatzverhaltens von Presshärtewerkzeugen durch Laserimplantation titanbasierter Hartstoffpartikel
15. Erlanger Workshop Warmblechumformung (Neue Materialien Fürth GmbH, 90762 Fürth, Deutschland, 17. November 2020 - 17. November 2020)
In: Marion Merklein (Hrsg.): 15. Erlanger Workshop Warmblechumformung 2020 - , :
Influence of a drawbead passage in deep drawing processes on surface values and the tribological system
International Deep-Drawing Research Group (IDDRG 2020) (Seoul Korea)
DOI: 10.1088/1757-899X/967/1/012008 - , , , , :
Verschleißmodellierung am Beispiel einer Polyamid-Stahl-Getriebepaarung für das prozessorientierte Toleranzmanagement
Summer School Toleranzmanagement (Erlangen, 28. September 2020 - 28. September 2020)
In: Sandro Wartzack (Hrsg.): Beiträge zur 4. Summer School 2020 - , , :
Fundamental analysis For the application of hybrid semi-finished products in sheet-bulk metal forming
In: Journal of Materials Processing Technology 283 (2020), Art.Nr.: 116709
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116709 - , , , :
Additive Manufacturing of Tailored Blank for Sheet-Bulk Metal Forming Processes
DOI: 10.1088/1757-899X/967/1/012034 - , :
Characterization of tribological conditions within direct hot stamping
In: Journal of Materials Processing Technology 278 (2020), Art.Nr.: 116535
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2019.116535 - , , , , :
On the influence of TiB2, TiC, and TiN hard particles on the microstructure of localized laser dispersed AISI D2 tool steel surfaces
In: Journal of Laser Applications 32 (2020)
ISSN: 1042-346X
DOI: 10.2351/7.0000059 - , , , , , , , , :
Data acquisition and control at the edge: a hardware/software-reconfigurable approach
In: Production Engineering 14 (2020), S. 365-371
ISSN: 0944-6524
DOI: 10.1007/s11740-020-00964-x - , , , :
Improvement of a rivet geometry for the self-piercing riveting of high-strength steel and multi-material joints
In: Production Engineering (2020)
ISSN: 0944-6524
DOI: 10.1007/s11740-020-00973-w - , , , , :
Verfahrenskombination zur umformtechnischen Herstellung von verzahnten, dünnwandigen Funktionselementen aus prozessoptimierten Halbzeugen
23. Umformtechnisches Kolloquium Hannover (Hannover, 4. März 2020 - 5. März 2020)
In: Behrens B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 2020 - , , , :
Determination of the properties of semi-finished parts in blanking processes
International Deep-Drawing Research Group (IDDRG 2020) (Busan, 26. Oktober 2020 - 30. Oktober 2020)
In: IOP Conference Series: Materials Science and Engineering 2020
DOI: 10.1088/1757-899X/967/1/012009 - , , :
Influence of the properties of the joining partners on the load-bearing capacity of shear-clinched joints
In: Journal of Materials Processing Technology 283 (2020), Art.Nr.: 116696
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116696 - , , , , , , :
Vernetzte Fertigung - Berücksichtigung der Herstellungshistorie von Blechbauteilen beim Fügen durch Umformen
In: wt Werkstattstechnik - Online 110 (2020), S. 677-683
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2020-10 - , :
Influence of tool wear on the load-bearing capacity of shear-clinched joints
In: Defect and Diffusion Forum 404 DDF (2020), S. 3-10
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.3 - , , :
Analysis of the modification of tool surfaces by abrasive blasting and laser polishing
In: Defect and Diffusion Forum 404 DDF (2020), S. 124-131
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.124 - , :
Analyse des tribologischen Einsatzverhaltens von modifizierten Werkzeugoberflächen
23. Umformtechnisches Kolloquium Hannover (Hannover, 4. März 2020 - 5. März 2020)
In: Bernd-Arno Behrens (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik 2020 - , :
Tool Sided Surface Modifications in the Industrial Environment
In: Marion Merklein, A. Erman Tekkaya, Bernd-Arno Behrens (Hrsg.): Lecture Notes in Production Engineering (LNPE), 2020, S. 477-492 (Sheet Bulk Metal Forming)
ISBN: 9783030619015
DOI: 10.1007/978-3-030-61902-2_21 - , , , :
Test method for friction characterization of rivets
In: Defect and Diffusion Forum 404 DDF (2020), S. 132-137
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.132 - , , , , , , :
Experimental analysis of the forming behavior of ash wood veneer with nonwoven backings
In: European Journal of Wood and Wood Products (2020)
ISSN: 0018-3768
DOI: 10.1007/s00107-020-01494-0
2019
- , , , , , , , :
Manufacturing of advanced smart tooling for metal forming
In: CIRP Annals - Manufacturing Technology (2019)
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2019.05.001 - , , , , :
Manufacturing and Characterization of Multilayered 7000-Series Aluminum with Improved Corrosion Behavior Processed via Accumulative Roll Bonding
10th Aluminium Two Thousand World Congress / 6th International Conference on Extrusion and Benchmark (ICEB) (Verona, 20. Juni 2017 - 24. Juni 2017)
In: MATERIALS TODAY-PROCEEDINGS, AMSTERDAM: 2019
DOI: 10.1016/j.matpr.2018.10.419 - , , , , , :
Adaption of tool surface for sheet-bulk metal forming by means of pressurized air wet abrasive jet machining
In: Production Engineering 13 (2019), S. 71-77
ISSN: 0944-6524
DOI: 10.1007/s11740-018-0858-4 - , , , , , , , :
Blockchain for forming technology - Tamper-proof exchange of production data
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012046 - , , :
On the inverse identification of Lankford coefficients using geometrical changes under quasi-biaxial loading
In: International Journal of Material Forming (2019)
ISSN: 1960-6206
DOI: 10.1007/s12289-019-01498-z - , , , :
Application of Tailor Heat Treated Blanks technology in a joining by forming process
In: Journal of Materials Processing Technology 264 (2019), S. 259-272
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2018.09.006 - , , , , , , , , , :
Comparison of Strain-path Indicators for Analysis of Processes in Sheet-bulk Metal Forming
The 13th International Conference on Numerical Methods in Industrial Forming Processes - , , , , , , :
4.0 in metal forming - Questions and challenges
12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2018 (Naples, 18. Juli 2018 - 20. Juli 2018)
In: Roberto Teti (Hrsg.): Procedia CIRP 2019
DOI: 10.1016/j.procir.2019.02.055 - , , , :
Geometric and corrosive influences on load-bearing capacity of multi-element shear-clinching specimen
22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8. Mai 2019 - 10. Mai 2019)
In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5112565 - , , , , :
Basics for inline measurement of tribological conditions in series production of car body parts
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012050 - , , , :
Investigation of the tribological behavior of car body parts in series production
6th International Conference on Accuracy in Forming Technology (ICAFT) / 25th SFU Saxon Conference on Forming Technology / 6th AutoMetForm International Lower Silesia-Saxony Conference on Advanced Metal Forming Processes in the Automotive Industry (Chemnitz, 6. November 2018 - 7. November 2018)
In: 6th ICAFT – International Conference on Accuracy in Forming Technology 25th SFU – Saxon Conference on Forming Technology 6th AutoMetForm – International Lower Silesia – Saxony Conference on Advanced Metal Forming Processes in the Automotive Industry, AMSTERDAM: 2019
DOI: 10.1016/j.promfg.2018.12.043 - , , , , , , , , :
A concept for process-oriented interdisciplinary tolerance management considering production-specific deviations
22nd International Conference on Engineering Design (ICED) (Delft, 5. August 2019 - 8. August 2019)
In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Cambridge, United Kingdom: 2019
DOI: 10.1017/dsi.2019.351
URL: https://www.cambridge.org/core/services/aop-cambridge-core/content/view/2DD6B2058F383E18C465C8731DBE9666/S2220434219003512a.pdf/concept_for_processoriented_interdisciplinary_tolerance_management_considering_productionspecific_deviations.pdf - , , , , , , , , :
Berücksichtigung von produktionsspezifischen Abweichungen im interdisziplinären Toleranzmanagement
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen, 5. Februar 2019 - 5. Februar 2019)
In: Wartzack (Hrsg.): Industriekolloquium der Forschergruppe FOR 2271, Stamsried: 2019
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c6a7ad28207e - , , , :
Investigation on the Tribological Behavior of Tool-sided Tailored Surfaces for Controlling the Material Flow in Sheet-Bulk Metal Forming
22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8. Mai 2019 - 10. Mai 2019)
In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5112718 - , , , , , , , , , :
Analysis of tribological behavior of surface modifications for a dry deep drawing process
In: Dry Metal Forming Open Access Journal 5 (2019), S. 13-24
Open Access: https://www.trockenumformen.de/publikationen/dmfoaj-2019/
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5de11a374a235 - , :
Characterization of temperature-dependent tension-compression asymmetry for high-strength aluminium alloys
In: Jens P. Wulfsberg; Wolfgang Hintze; Bernd-Arno Behrens (Hrsg.): Production at the leading edge of technology. Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Berlin Heidelberg: 2019
DOI: 10.1007/978-3-662-60417-5_10 - , , , , :
Maßgeschneiderte Halbzeuge - Umformtechnische Herstellung von Funktionsbauteilen zur Realisierung von Leichtbaukomponenten
In: wt Werkstattstechnik - Online 109 (2019), S. 745-749
ISSN: 1436-4980 - , :
Investigation of diffusion behavior of carburized sheet metal in hot stamping
In: Manufacturing Review 6 (2019)
ISSN: 2265-4224
DOI: 10.1051/mfreview/2019017 - , :
Investigation of the Quenching Behavior of Carburized Sheet Metal in Hot Stamping
7th International Conference on Hot Sheet Metal Forming of high-performance steel - CHS2 (Luleå)
In: Oldenurg M, Hardell J, Casellas D (Hrsg.): Proceedings of the 7th International Conference on Hot Sheet Metal Forming of high-performance steel - CHS2 2019 - , , , , , , :
Customized exposure strategies for manufacturing hybrid parts by combining laser beam melting and sheet metal forming
In: Journal of Laser Applications (2019)
ISSN: 1042-346X
DOI: 10.2351/1.5096115 - , , , , :
Determination of Forming Limits in Sheet Metal Forming Using Deep Learning
In: Materials 12 (2019)
ISSN: 1996-1944
DOI: 10.3390/ma12071051 - , , :
Investigations on Residual Stress Generation in Extruded Steel Components
9th Congress of the German Academic Association for Production Technology (WGP) (Hamburg, 30. September 2019 - 2. Oktober 2019)
DOI: 10.1007/978-3-662-60417-5_8 - , , :
Residual effects of ultrasonic-assisted compression testing on pure copper
22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8. Mai 2019 - 10. Mai 2019)
In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5112644 - , :
Researching of commonalities and differences in cold forging of spur and helical gears
In: Production Engineering 13 (2019), S. 391-397
ISSN: 0944-6524
DOI: 10.1007/s11740-019-00887-2 - , :
Research of Adapted Tool Design in Cold Forging of Gears
In: International Journal of Material Forming (2019)
ISSN: 1960-6206
DOI: 10.1007/s12289-019-01508-0 - , , , :
Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals
In: Journal of Polymer Engineering (2019)
ISSN: 0334-6447
DOI: 10.1515/polyeng-2019-0098 - , , , :
Experimental investigation of tool-sided surface modifications for dry deep drawing processes at the tool radii area
In: Procedia Manufacturing 29 (2019), S. 201-208
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2019.02.127
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5cb878045af3a - , , , , :
Influence of varying sheet material properties on dry deep drawing process
In: IOP Conference Series: Materials Science and Engineering 651 (2019), S. 1-8
ISSN: 1757-8981
DOI: 10.1088/1757-899X/651/1/012012
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5de0c762989e3 - , , , , :
Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
22nd International ESAFORM Conference on Material Forming (ESAFORM 2019) (Vitoria-Gasteiz, 8. Mai 2019 - 8. Mai 2019)
DOI: 10.1063/1.5112570 - , , :
Accuracy of conventional FE-Models in Bulk-Forming of Micropins from Sheet Metal
In: Journal of Micro and Nano-Manufacturing (2019), Art.Nr.: 010902
ISSN: 2166-0468
DOI: 10.1115/1.4042965 - , , :
Accuracy of Conventional Finite Element Models in Bulk-Forming of Micropins from Sheet Metal
In: Journal of Micro and Nano-Manufacturing 7 (2019), Art.Nr.: 010902
ISSN: 2166-0468
DOI: 10.1115/1.4042965 - , :
Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures
1st International Conference on Advanced Joining Processes 2019 - AJP 2019 (Ponta Delgada, Azores, 24. Oktober 2019 - 25. Oktober 2019)
In: Lucas F M da Silva, Paulo Martins, Mohamad El-Zein, Uwe Reisgen (Hrsg.): AJP 2019 2019
DOI: 10.1016/j.jmatprotec.2020.116697 - , , , , :
Influence of the process temperature on the tribological behaviour during bulk forming of high nitrogen steel
1st International Conference on Advanced Joining Processes AJP 2019 - , :
Heating effect on the forming behaviour of high nitrogen steel in bulk forming
22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8. Mai 2019 - 10. Mai 2019)
In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5112701 - , , , , :
Investigations on residual stress generation in full-forward-extrusion
In: Production Engineering (2019)
ISSN: 0944-6524
DOI: 10.1007/s11740-019-00892-5 - , , , , :
Mechanisms of residual stress generation in full-forward-extrusion
In: Production Engineering (2019)
ISSN: 0944-6524 - , , :
Augmented Reality for Forming Technology - Visualisation of Simulation Results and Component Measurement
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012045 - , :
Determination of strain dependent anisotropy in layer compression tests and resulting influence on the yield locus modelling - , , , , , , :
Control of the material flow in sheet-bulk metal forming using modifications of the tool surface
In: International Journal of Material Forming 12 (2019), S. 17-26
ISSN: 1960-6206
DOI: 10.1007/s12289-018-1399-2 - , , , , :
Analysing resistance element welding with upset auxiliary joining steel-elements under shear load
18th International Conference on Sheet Metal, SHEMET 2019 (Leuven, 15. April 2019 - 17. April 2019)
In: Joost R. Duflou, Yannick Carette, Livan Fratini, Fabrizio Micari, Marion Merklein, Hinnerk Hagenah (Hrsg.): Procedia Manufacturing 2019
DOI: 10.1016/j.promfg.2019.02.145 - , , , :
Investigation on blasted tool surfaces as a measure for material flow control in sheet-bulk metal forming
In: Manufacturing Review 6 (2019)
ISSN: 2265-4224
DOI: 10.1051/mfreview/2019012 - , :
Versagensanalyse unter prozessnaher Vorbelastung durch überlagerte Zug- und Wechselbiegebelastung
(2019)
(anderer) - , :
Tribological and thermal investigation of modified hot stamping tools
In: Tribology in Industry 41 (2019), S. 76-89
ISSN: 0354-8996
DOI: 10.24874/ti.2019.41.01.09 - , , , :
Properties of Tool Steels for Application in Hot Stamping
In: Steel Research International (2019)
ISSN: 1611-3683
DOI: 10.1002/srin.201900422 - , , , , :
Characterisation of the Tensile Bonding Strength of Ti-6Al-4V Hybrid Parts Made by Sheet Metal Forming and Laser Beam Melting
8th Congress of the German Academic Association for Production Technology (WGP) (Aachen, 19. November 2018 - 20. November 2018)
DOI: 10.1007/978-3-030-03451-1_36
URL: https://www.springer.com/us/book/9783030034504 - , , , , :
Hybride Bauteile, Werkzeuge und Prozessketten – Anwendungen der Kombination aus Additiver Fertigung und Umformtechnik
7. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg) - , , , , :
Charakterisierung der Umformbarkeit und mechanischen Eigenschaften von additiv gefertigtem Ti6Al4V
In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Martin Stockinger (Hrsg.): XXXVIII. Verformungskundliches Kolloquium 2019 - , :
Characterization of Work Hardening Behavior of Additively Manufactured Stainless Steel 316L (1.4404) Using Bulk Metal Forming at Elevated Temperature.
Lasers in Manufacturing Conference 2019 (München) - , :
Comparison of extrusion processes in sheet-bulk metal forming for production of filigree functional elements
In: CIRP Journal of Manufacturing Science and Technology (2019)
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2019.05.004 - , :
Influence of component design on extrusion processes in sheet-bulk metal forming
In: International Journal of Material Forming (2019)
ISSN: 1960-6206
DOI: 10.1007/s12289-019-01522-2 - , , , :
Numerical simulation of hydraulic bulging using uniaxial and biaxial flow curves and different yield criteria
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012038 - , , , , :
Characterisation of new lubrication systems for hot forming of high strength aluminum alloys
OP Conference Series, Materials Science and Engineering
In: OP Conference Series, Materials Science and Engineering 2019
DOI: 10.1088/1757-899x/651/1/012013 - , , , :
Investigation of dry lubrication systems for lightweight materials in hot forming processes.
Wissenschaftliche Gesellschaft für Produktionstechnik (Hamburg, 30. September 2019 - 2. Oktober 2019)
In: Wulfsberg J, Hintze W, Behrens BA (Hrsg.): Produktion im Grenzbereich – Vorsprung halten, Zukunft sichern, Berlin, Heidelberg: 2019
DOI: 10.1007/978-3-662-60417-5_4 - , , :
Berücksichtigung funktionsrelevanter Gestaltabweichungen bei der Auslegung von Umformprozessen zur Herstellung von Stirnrädern mit Sonderverzahung durch Fließpressen
Industriekolloquium der Forschungsgruppe FOR 2271
In: S. Wartzack (Hrsg.): Industriekolloquium der Forschungsgruppe FOR 2271, Stamsried: 2019 - , , , , , , :
A methodology for the application of virtual evaluation methods within the design process of cold forged steel pinions
22nd International Conference on Engineering Design (, 5. August 2019 - 9. August 2019)
In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands: 2019
DOI: 10.1017/dsi.2019.352 - , , , :
Einsatz numerischer Analysetools bei der Auslegung und Herstellung kaltfließgepresster Stahlzahnräder
In: Konstruktion (2019), S. 85-90
ISSN: 0720-5953 - , , , :
Influence of tribological conditions on application relevant component properties of cold forged gears
In: Production Engineering (2019)
ISSN: 0944-6524
DOI: 10.1007/s11740-019-00909-z - , , , :
Untersuchung des Einsatzverhaltens kaltfließgepresster Zahnräder
34. Jahrestreffen der Kaltmassivumformer (Düsseldorf, 27. Februar 2019 - 28. Februar 2019)
In: VDI Wissensforum GmbH (Hrsg.): 34. Jahrestreffen der Kaltmassivumformer 2019 - , , , , , :
Targeted influencing of the mission-relevant component properties of cold-forged gearwheels
In: Konstruktion 2019 (2019), S. 94-98
ISSN: 0720-5953 - , , , , , :
Gezielte Beeinflussung der einsatzrelevanten Bauteileigenschaften kaltfließgepresster Zahnräder
In: Konstruktion (2019), S. 94-98
ISSN: 0720-5953 - , , , , :
Investigation of the tribological performance of a-C:H coating systems by modifying adhesive layer for application in dry deep drawing
International Tribology Conference Sendai 2019 (Sendai, 17. September 2019 - 21. September 2019)
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5db14676ba9fc - , , , :
Tribological performance of localized dispersed X38CrMoV5-3 surfaces for hot stamping of Al-Si coated 22MnB5 sheets
7th International Conference Hot Sheet Metal Forming of High-Performance Steel (Luleå, 2. Juni 2019 - 5. Juni 2019)
In: Oldenburg M, Hardell J, Casellas D (Hrsg.): Hot Sheet Metal Forming of High-Performance Steel CHS² 2019 - , , , :
Untersuchung des tribologischen Einsatzverhaltens von lokal dispergierten Presshärtewerkzeugoberflächen
14. Erlanger Workshop Warmblechumformung (Neue Materialien Fürth GmbH, 90762 Fürth, 19. November 2019 - 19. November 2019)
In: M. Merklein (Hrsg.): 14. Erlanger Workshop Warmblechumformung 2019 - , , :
Failure behavior of different sheet metals after passing a drawbead
47th SME North American Manufacturing Research Conference, NAMRC 47, Pennsylvania, USA
In: 47th SME North American Manufacturing Research Conference, NAMRC 47, Pennsylvania, USA 2019
DOI: 10.1016/j.promfg.2019.06.129 - , :
Study of the mechanical properties of sheet metals drawn through drawbeads
In: Manufacturing Review 6 (2019)
ISSN: 2265-4224
DOI: 10.1051/mfreview/2019014 - , :
Versagensanalyse nach Vorbelastung in einer Ziehsicke
EFB-Kolloquium Blechverarbeitung: Wirtschaftliche Verarbeitung hochfester Werkstoffe für Leicht- und Funktionsbau
In: EFB-Kolloquium Blechverarbeitung: Wirtschaftliche Verarbeitung hochfester Werkstoffe für Leicht- und Funktionsbau 2019 - , , , , :
Einfluss der fertigungsbedingten Gestalt und Struktur auf das Einlaufverhalten von Stahl-Kunststoff-Getriebepaarungen
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen)
In: Industriekolloquium der Forschergruppe FOR 2271 2019 - , , , , , , :
New Approach on the Allocation of Wear Allowances - a Case Study
22nd International Conference on Engineering Design (ICED19) (Delft, 5. August 2019 - 8. August 2019)
DOI: 10.1017/dsi.2019.358 - , , , :
Effect of Surface Structure on Run-in Wear in Steel-Polyamide Gear Sets
In: Zeitschrift Kunststofftechnik 15 (2019), S. 370-391
ISSN: 1864-2217
DOI: 10.3139/O999.03052019 - , :
Tribological challenges in press hardening
In: Stahl und Eisen 139 (2019), S. 18-23
ISSN: 0340-4803 - , , :
Investigation on basic friction and wear mechanisms within hot stamping considering the influence of tool steel and hardness
In: Wear 426 (2019), S. 378-389
ISSN: 0043-1648
DOI: 10.1016/j.wear.2018.12.018 - , , :
Investigation of different surface treatment parameters in the context of roll bonding processes
18th International Conference on Sheet Metal, SHEMET 2019
DOI: 10.1016/j.promfg.2019.02.098 - , , , , :
Investigations on TaC Localized Dispersed X38CrMoV5-3 Surfaces with Regard to the Manufacturing of Wear Resistant Protruded Surface Textures
In: Lasers in Manufacturing and Materials Processing (2019)
ISSN: 2196-7229
DOI: 10.1007/s40516-019-00106-x - , , , , , :
Microstructural evolution and geometrical properties of TiB2 metal matrix composite protrusions on hot work tool steel surfaces manufactured by laser implantation
In: International Journal of Advanced Manufacturing Technology (2019)
ISSN: 0268-3768
DOI: 10.1007/s00170-019-04630-0 - , , :
Cross-profile deep drawing of magnesium alloy AZ31 sheet metal for springback analysis under various temperatures
18th International Conference on Sheet Metal, SHEMET 2019
In: 18th International Conference on Sheet Metal, SHEMET 2019 2019
DOI: 10.1016/j.promfg.2019.02.155 - , , , , :
Friction reduction in EHL contacts by surface microtexturing – tribological performance, manufacturing and tailored design
In: Industrial Lubrication and Tribology 71 (2019), S. 986-990
ISSN: 0036-8792
DOI: 10.1108/ILT-08-2018-0306
URL: https://www.emeraldinsight.com/doi/full/10.1108/ILT-08-2018-0306 - , :
Flexible rolling of rotational symmetric tailored blanks with a two-sided thickness profile
47th SME North American Manufacturing Research Conference, NAMRC 2019 (Erie, PA, 10. Juni 2019 - 14. Juni 2019)
In: Livan Fratini, Ihab Ragai, Lihui Wang (Hrsg.): Procedia Manufacturing 2019
DOI: 10.1016/j.promfg.2019.06.131 - , :
Manufacturing of tailored blanks by orbital forming with a two-sided material thickening
In: Journal of Materials Processing Technology (2019), Art.Nr.: 116491
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2019.116491 - , , , , , :
Maßgeschneiderter Werkzeugoberflächen in einem flexiblen Walzprozess
DOI: 10.25593/978-3-96147-280-2
(Conference report) - , , , , , , :
Laser based techniques to adapt the tribological conditions in dry deep drawing
International Conference on Advanced Optical Technologies (Erlangen, 13. März 2019 - 15. März 2019)
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5db142cda21ed - , , :
Influence of the Material Combination on the Load-bearing Capacity of Shear-clinched Joints
1st International Conference on Advanced Joining Processes AJP 2019 (Ponta Delgada, São Miguel, 24. Oktober 2019 - 25. Oktober 2019) - , , , :
Investigation of the tool wear behaviour in shear-clinching processes during the running-in phase
22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8. Mai 2019 - 10. Mai 2019)
In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5112569 - , , , :
Untersuchung der Werkzeugbeanspruchung und des Verschleißes beim Schneidclinchen
In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Martin Stockinger (Hrsg.): XXXVIII. Verformungskundliches Kolloquium 2019 - , , , , , :
Fundamental mechanisms and their interactions in shear‐clinching technology and investigation of the process robustness
In: Materialwissenschaft und Werkstofftechnik (2019)
ISSN: 0933-5137
DOI: 10.1002/mawe.201900030
2018
- , , , :
Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 1: Characterization of Onset of Necking and Expert Evaluation
In: Materials 11 (2018)
ISSN: 1996-1944
DOI: 10.3390/ma11091495 - , :
Analysis of the bending effects and the biaxial pre-straining in sheet metal stretch forming processes for the determination of the forming limits
In: International Journal of Mechanical Sciences 138-139 (2018), S. 295-309
ISSN: 0020-7403
DOI: 10.1016/j.ijmecsci.2018.02.024 - , , :
Metallographic analysis of failure mechanisms during Nakajima tests for the evaluation of forming limits on a dual-phase steel
In: IOP Conference Series: Materials Science and Engineering 418 (2018)
ISSN: 1757-8981
DOI: 10.1088/1757-899X/418/1/012047 - , , , , :
Leichtbauwerkstoffe für den modernen Automobilbau
In: Konstruktion 3 (2018), S. 50-54
ISSN: 0720-5953 - , , :
Numerische Auslegung eines kombinierten Umform- und Abschreckprozesses zur Herstellung hochfester Aluminiumbauteile
13. Erlanger Workshop Warmblechumformung 2018
In: Merklein, M. (Hrsg.): Tagungsband zum 13. Erlanger Workshop Warmblechumformung 2018 2018 - , , :
Influence of a local laser heat treatment on the bending properties of aluminium extrusion profiles
In: Procedia CIRP 74 (2018), S. 780-784
ISSN: 2212-8271
DOI: 10.1016/j.procir.2018.08.011 - , , , , , :
Shear-Clinching of Multi-Element Specimens of Aluminium Alloy and Ultra-High-Strength Steel
In: Key Engineering Materials 767 (2018), S. 389-396
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.767.389 - , , , , :
Investigation of the influence of tool-sided parameters on deformation and occurring tool loads in shear-clinching processes
In: Procedia Manufacturing 15 (2018), S. 1346-1353
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.349 - , , , :
Einfluss mikrogeformter Kanten an Metalleinlegern auf die Temperaturwechselbeständigkeit mediendichter Kunststoff-Metall-Hybriden
In: Zeitschrift Kunststofftechnik 14 (2018), S. 211-232
ISSN: 1864-2217
DOI: 10.3139/o999.03032018 - , :
Improvement of deep drawability of ultra-fine grained 6000 series aluminum alloy by tailored heat treatment
In: Procedia Manufacturing 15 (2018), S. 976-983
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.397 - , , , , :
Orbital forming of tailored blanks with two-sided local material thickening
In: International Journal of Advanced Manufacturing Technology 97 (2018), S. 1-10
ISSN: 0268-3768
DOI: 10.1007/s00170-018-2009-7 - , :
Fertigung funktionsoptimierter Bauteile beim Presshärten
13. Erlanger Workshop Warmblechumformung (Erlangen)
In: M. Merklein (Hrsg.): Tagungsband zum 13. Erlanger Workshop Warmblechumformung 2018 - , :
Identification of a process window for tailored carburization of sheet metals in hot stamping
In: AIP Conference Proceedings 1960 (2018), Art.Nr.: 160012
ISSN: 0094-243X
DOI: 10.1063/1.5035038 - , :
Investigation of diffusion behavior of carburized sheet metal in hot stamping
5th International Conference on New Forming Technology (ICNFT 2018) (Bremen, 18. Dezember 2018 - 21. Dezember 2018)
In: F. Vollertsen, T.A. Dean, Y. Qin, S.J. Yuan (Hrsg.): MATEC Web Conf 2018
DOI: 10.1051/matecconf/201819008004 - , , , , , , :
Customized Exposure Strategies for Manufacturing Hybrid Parts by Combining Laser Beam Melting and Sheet Metal Forming
DOI: 10.2351/1.5096115 - , , , , , :
In Situ Formation of a Metastable β-Ti Alloy by Laser Powder Bed Fusion (L-PBF) of Vanadium and Iron Modified Ti-6Al-4V
In: Metals 8 (2018), Art.Nr.: 1067
ISSN: 2075-4701
DOI: 10.3390/met8121067
URL: https://www.mdpi.com/2075-4701/8/12/1067 - , , , , , , , :
Adaption of tribological behavior of a-C:H coatings for application in dry deep drawing
In: MATEC Web of Conferences 190 (2018), S. 1 - 10
ISSN: 2261-236X
DOI: 10.1051/matecconf/201819014002
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5bb2fd875f1a8 - , , , :
Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 2: Unsupervised Methodology and Application
In: Materials 11 (2018), S. 1892
ISSN: 1996-1944
DOI: 10.3390/ma11101892 - , , , :
Investigation of heat treatment strategies for additively-manufactured tools of X37CrMoV5-1
In: Metals 8 (2018), Art.Nr.: 854
ISSN: 2075-4701
DOI: 10.3390/met8100854 - , , :
Influence of tribological conditions on cold forging of gears
In: Production Engineering 12 (2018), S. 367-375
ISSN: 0944-6524
DOI: 10.1007/s11740-017-0785-9 - , , :
Nachhaltige Blechumformung durch Trockentiefziehen
In: wt Werkstattstechnik - Online 108 (2018), S. 652-656
ISSN: 1436-4980 - , , :
Verification of the Accuracy of FE-Models in Bulk-Forming of Micropins from Sheet Metal
In: WCMNM 2018 World Congress on Micro and Nano Manufacturing, doi: 10.3850/978-981-11-2728-1_02 2018
DOI: 10.3850/978-981-11-2728-1_02 - , , :
Verification of the Accuracy of FE-Models in Bulk-Forming of Micropins from Sheet Metal
World Congress on Micro and Nano Manufacturing - WCMNM 2018 (Portorož, 18. September 2018 - 20. September 2018)
DOI: 10.3850/978-981-11-2728-1_02 - , :
Improvement of numerical modelling considering plane strain material characterization with an elliptic hydraulic bulge test
In: Journal of Manufacturing and Materials Processing 2 (2018), S. 1-20
ISSN: 2504-4494
DOI: 10.3390/jmmp2010006 - , :
Improvement of the drawing ratio of the anisotropic material behaviour under near plane strain conditions for DP600 characterized in elliptic hydraulic bulge test
DOI: 10.1088/1742-6596/1063/1/012161 - , , :
Experimental Evaluation of Cold Forging Lubricants Using Double-Cup-Extrusion-Tests
In: Materials Science Forum 918 (2018), S. 65-70
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.918.65 - , , :
Influence of the coating process on the tribological conditions during cold forging with a MoS2 based lubricant
In: AIP Conference Proceedings 2018
DOI: 10.1063/1.5034867 - , , , , :
Investigation of the tribological behaviour of microstructures for controlling the material flow in sheet-bulk metal forming
In: CIRP Journal of Manufacturing Science and Technology (2018)
ISSN: 1755-5817
DOI: 10.1016/j.cirpj.2018.05.002
URL: https://www.sciencedirect.com/science/article/pii/S1755581718300294?via=ihub - , , , :
Prozessorientierte Werkstoffcharakterisierung für die numerische Auslegung von Blechumformperationen - EFB-Forschungsbericht Nr. 484
Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2018
(EFB-Forschungsbericht)
ISBN: 978-3-86776-536-7 - , , , :
Material flow control in sheet-bulk metal forming processes using blasted tool surfaces
In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F (Hrsg.): Proceedings of the 5th International Conference on New Forming Technology 2018
DOI: 10.1051/matecconf/201819013003 - , , , :
Influence of ultrasonic vibration on the shear formability of metallic materials
In: CIRP Annals - Manufacturing Technology 67 (2018), S. 277-280
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2018.04.108 - , , , :
Increasing the Adhesive Wear Resistance of Hot Stamping Tools By Modifiying the Surfaces
In: Key Engineering Material, 767 2018
DOI: 10.4028/www.scientific.net/kem.767.61 - , , , , , , , :
Influence of a bending operation on the bonding strength for hybrid parts made of Ti-6Al-4V
10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 3. September 2018 - 6. September 2018)
In: Procedia CIRP 2018
DOI: 10.1016/j.procir.2018.08.113 - , , :
Numerical modelling approach for the temperature dependent forming behaviour of Ti-6Al-4V
In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F. (Hrsg.): Proceedings of the 5th International Conference on New Forming Technology, MATEC Web of Conferences 2018
DOI: 10.1051/matecconf/201819012004 - , , , , :
Potentiale der Kombination von Umformtechnik und additiver Fertigung in hybriden Prozessketten
6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung - , , , , , :
Verknüpfung additiver Fertigung und Umformtechnik in Form hybrider Bauteile und Werkzeuge.
Fachtagung Werkstoffe und Additive Fertigung (Potsdam, 25. April 2018 - 26. April 2018)
In: Witt G (Hrsg.): Tagungsband Fachtagung Werkstoffe und Additive Fertigung 2018 - , , , , :
Bulk Metal Forming of Additively Manufactured Elements
5th International Conference on New Forming Technology (ICNFT 2018)
In: 190 2018
DOI: 10.1051/matecconf/201819003002
URL: https://www.matec-conferences.org/articles/matecconf/abs/2018/49/matecconf_icnft2018_03002/matecconf_icnft2018_03002.html - , , :
Investigation of Fatigue Strength of Tool Steels in Sheet-Bulk Metal Forming
The 21st International ESAFORM Conference on Material Forming
In: AIP Conference Proceedings 1960:1 2018
DOI: 10.1063/1.5035048 - , :
Analysis of the stress and directional dependent Bauschinger-effect of sheet metals
37th International Deep Drawing Research Group Conference - Forming of High Performance Sheet Materials and Components, IDDRG 2018 (Waterloo, ON, CAN, 3. Juni 2018 - 7. Juni 2018)
In: Cliff Butcher, Michael Worswick, Alexander Bardelcik (Hrsg.): IOP Conference Series: Materials Science and Engineering 2018
DOI: 10.1088/1757-899X/418/1/012084 - , :
Effect on the mechanical properties of sheet metals after the use of drawbeads in deep drawing
In: 5th International Conference on New Forming Technology ICNFT Bremen 2018 2018
DOI: 10.1051/matecconf/201819005001 - , :
Einfluss der Werkzeugeigenschaften auf die tribologischen Bedingungen beim Presshärten
In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Bruno Buchmayr (Hrsg.): XXXVII. Verformungskundliches Kolloquium 2018 - , , :
Tribological Behavior of Different Tool Steels and Surface Properties under Hot Stamping Conditions
In: Key Engineering Material, 767 2018
DOI: 10.4028/www.scientific.net/KEM.767.212 - , , , , , , :
A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters
In: Journal of Materials Processing Technology 252 (2018), S. 537-545
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2017.10.013 - , , , , , , , :
Influence of laser generated micro textured coated tool surfaces on dry deep drawing processes
In: Dry Metal Forming Open Access Journal 4 (2018), S. 35 - 46
Open Access: http://www.drymetalforming.de/
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a869448addd0 - , , , , , :
Tribological Behavior of Carbon Based Coatings Adapted to Lubricant-Free Forming Conditions
In: International Journal of Precision Engineering and Manufacturing - Green Technology 5 (2018), S. 361-367
ISSN: 2198-0810
DOI: 10.1007/s40684-018-0038-1 - , :
Oberflächenanalyse von Tailored Blanks hergestellt durch ein Taumelverfahren
XXXVII. Verformungskundliches Kolloquium
In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Bruno Buchmayr (Hrsg.): XXXVII. Verformungskundliches Kolloquium 2018 - , , , , , , :
Numerical Investigation of the Tool Load in Joining by Forming of Dissimilar Materials Using Shear-Clinching Technology
In: Key Engineering Materials 767 (2018), S. 397-404
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.767.397 - , :
Analysis of combined extrusion micro coining process to manufacture microstructured tappets
In: Procedia Manufacturing 15 (2018), S. 272-279
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.219
2017
- , :
Metallographic Analysis of Nakajima Tests for the Evaluation of the Failure Developments
In: Livan Fratini (Hrsg.): Procedia Engineering 2017
DOI: 10.1016/j.proeng.2017.04.015 - , , , , :
Towards virtual deformation dilatometry for the design of hot stamping process
International Conference on the Technology of Plasticity, ICTP 2017 (Hucisko, GBR, 17. September 2017 - 22. September 2017)
In: Julian Allwood (Hrsg.): Procedia Engineering 2017
DOI: 10.1016/j.proeng.2017.10.945 - , , :
Investigation of a process simulation method for flexible clamping of sheet metal parts
International Conference on the Technology of Plasticity, ICTP 2017 (Hucisko, GBR, 17. September 2017 - 22. September 2017)
In: Julian Allwood (Hrsg.): Procedia Engineering 2017
DOI: 10.1016/j.proeng.2017.10.1055 - , , :
Influences of indentation forming on surface characteristics and metallographic properties of bright finishing alloys
7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017 (Aachen, 5. Oktober 2017 - 6. Oktober 2017) - , , , , , , , , :
Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V
Lasers in Manufacturing LIM 2017 (München, 26. Juni 2017 - 29. Juni 2017) - , , :
Experimental study on the flow behavior during hot forming and quenching of the high-strength aluminum alloy AA6111
XXXVI. Verformungskundliches Kolloquium
In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Bruno Buchmayr (Hrsg.): XXXVI. Verformungskundliches Kolloquium 2017 - , , :
Experimental study on the warm forming and quenching behaviour for hot stamping of high-strength aluminum alloys
In: IDDRG 2017 (Hrsg.): Journal of Physics: Conference Series 2017
DOI: 10.1088/1742-6596/896/1/012055 - , :
Efficient Aluminium - Anwendung hochfester Aluminiumlegierungen im modernen Karosseriebau
37. EFB-Kolloquium Blechverarbeitung 2017
In: Europäische Forschungsgesellschaft für Blechverarbeitung (Hrsg.): Tagungsband des 37. EFB-Kolloquiums Blechverarbeitung 2017 2017 - , :
Influence of Warm Bending on the Surface Topography of Titanium Alloy Ti-6Al-4V
In: Procedia Engineering 183 (2017), S. 23-30
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.04.006 - , , , :
Surface structuring of forming tool surfaces by high feed milling - , , , , , :
Linked heat treatment and bending simulation of aluminium tailored heat treated profiles
4th World Congress on Integrated Computational Materials Engineering, ICME 2017 ( Ypsilanti, MI, USA, 21. Mai 2017 - 25. Mai 2017)
In: Paul Mason, Georg J. Schmitz, Amarendra K. Singh, Charles R. Fisher, Alejandro Strachan, Ryan Glamm, Michele V. Manuel (Hrsg.): Minerals, Metals and Materials Series 2017
DOI: 10.1007/978-3-319-57864-4_22 - , , , , , , :
Precipitation behaviour and mechanical properties during short‑term heat treatment for tailor heat treated profiles (THTP) of aluminium alloy 6060 T4
15th International Conference on Aluminium Alloys, ICAA 2016 (Chongqing, 12. Juni 2016 - 16. Juni 2016)
In: Qing Liu, Robert Sanders, Zhihong Jia, Lingfei Cao, Jian-Feng Nie, Jian-Feng Nie (Hrsg.): Materials Science Forum 2017
DOI: 10.4028/www.scientific.net/MSF.877.400 - , , , :
Aluminiumlösungen aus maßgeschneidert wärmebehandelten Halbzeugen
In: Konstruktion 06 (2017)
ISSN: 0720-5953 - , , , :
Verbesserung der Umformbarkeit von Aluminium
In: Konstruktion 69 (2017), S. IW14-IW16
ISSN: 0720-5953 - , , , , , , , :
Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by laser metal deposition for the additive manufacturing of cold forging tools
In: Journal of Laser Applications 29 (2017), Art.Nr.: 022307
ISSN: 1042-346X
DOI: 10.2351/1.4983247 - , , , , , , , :
Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by LMD for the additive Manufacturing of cold forging tools
In: Journal of Laser Applications 29 (2017), S. 022307
ISSN: 1042-346X - , :
Herstellung und Umformeigenschaften hochfester mehrlagiger Aluminiumlegierungen der 6000er-Serie
In: Europäische Forschungsgesellschaft für Blechverarbeitung (Hrsg.): Energie / Effiziente Verarbeitung zukunftsweisender Leichtbauwerkstoffe 2017 - , , :
Experimental Investigation and Numerical Modeling of the Bond Shear Strength of Multi-layered 6000 Series Aluminum Alloys
In: Procedia Engineering 183 (2017), S. 283-290
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.04.040 - , , , , , , , :
Effect of picosecond laser based modifications of amorphous carbon coatings on lubricant-free tribological systems
In: Journal of Laser Micro Nanoengineering 12 (2017), S. 132-140
ISSN: 1880-0688
DOI: 10.2961/jlmn.2017.02.0015 - , , , :
Proprietà meccaniche di una tecnologia di giunzione innovativa tipo shear-clinching per strutture leggere automobilistiche in acciaio ad altissima resistenza e leghe di alluminio
In: Rivista Italiana della Saldatura 69 (2017), S. 171-184
ISSN: 0035-6794 - , , , :
Specimen´s Geometry Related Influences on Load-Bearing Capacity of Joining Aluminium and UHSS by Innovative Shear-Clinching
In: Journal of Materials Science Research 6 (2017)
ISSN: 1927-0585 - , , , , :
Sheet metal forming limits as classification problem
Machine Vision Applications (Nagoya, 8. Mai 2017 - 12. Mai 2017)
In: Proceedings of the 15th IAPR International Conference on Machine Vision Applications 2017
DOI: 10.23919/MVA.2017.7986814
URL: https://www5.informatik.uni-erlangen.de/Forschung/Publikationen/2017/Jaremenko17-SMF.pdf - , , , , :
Perfomance of Hot Forging Tools built by Laser Metal Deposition of Hot Work Tool Steel X37CrMoV5-1
Laser in Manufacturing Conference 2017 - , , , , , :
Influence of the mechanical fatigue progress on the magnetic properties of electrical steel sheets
In: Archives of Electrical Engineering 66 (2017), S. 351-360
ISSN: 1427-4221
DOI: 10.1515/aee-2017-0026 - , , , :
Influence of tribological conditions on cold forging processes
In: Proceedings THE"A" Coatings 2017 - , :
Virtuelle Analysetools – Eine smarte Methode zur effizienten Erforschung von Kaltfließpressprozessen
In: Konstruktion 69 (2017), S. 78-82
ISSN: 0720-5953 - , , , , , , :
Data-driven Model Development for Quality Prediction in Forming Technology
In: 15th IEEE International Conference on Industrial Informatics (INDIN) 2017
DOI: 10.1109/INDIN.2017.8104871 - , , , :
Experimental and Numerical Studies on the Forming Behavior of High Strain Al-Mg-Si(-Cu) Sheet Alloys
17th International Conference on Sheet Metal, SHEMET 2017 (Palermo, ITA, 10. April 2017 - 12. April 2017)
In: Livan Fratini (Hrsg.): Procedia Engineering 2017
DOI: 10.1016/j.proeng.2017.04.017 - , , , , , :
Forming characteristics of artificial aging Al-Mg-Si-Cu sheet alloys
20th International ESAFORM Conference on Material Forming, ESAFORM 2017 (Dublin, IRL, 26. April 2017 - 28. April 2017)
In: Dermot Brabazon, Inam Ul Ahad, Sumsun Naher (Hrsg.): AIP Conference Proceedings 2017
DOI: 10.1063/1.5007977 - , , , , :
Modification of Tribological Conditions for Influencing the Material Flow in Bulk Forming of Microparts from Sheet Metal
In: AIP Conference Proceedings 1896 2017
DOI: 10.1063/1.5007959 - , , , :
Augmented Reality Technology for the Purpose of Sheet Metal Forming Simulation Evaluation
10th Forming Technology Forum 2017 - Model Based Control for Smart Forming Processes
In: van den Boogaard, T. (Hrsg.): 10th Forming Technology Forum 2017 - Model Based Control for Smart Forming Processes 2017 - , , :
Ultraschallunterstütztes Umformen und Verstemmen - Aktuelle Ergebnisse aus dem Verbundprojekt "UltraCaulk"
In: wt Werkstattstechnik - Online 107 (2017), S. 52-58
ISSN: 1436-4980 - , :
Analysis of the Lankford Coefficient Evolution at Different Strain Rates for AA6016-T4, DP800 and DC06
In: Dermot Brabazon, Sumsun Naher and Inam Ul Ahad (Hrsg.): AIP Conference Proceedings 1896(2017)160001 2017
DOI: 10.1063/1.5008176 - , , :
Characterisation of strain rate dependency of sheet metals under biaxial loading with a strain rate controlled hydraulic bulge test
7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017 (Aachen, 5. Oktober 2017 - 6. Oktober 2017)
In: R. H. Schmitt, G. Schuh (Hrsg.): 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017 2017 - , , , :
Identification of tribological mechanisms of shot peened steel surfaces for an application in sheet-bulk metal forming
In: Martin Levesque (Hrsg.): Proceedings of the 13th International Conference on Shot Peening 2017 - , , , , , :
Design, Manufacturing and Tribological Performance of Microtextured Bucket Tappets for Friction Reduction in the Valve Train
6th World Tribology Congress (Beijing/China, 17. September 2017 - 22. September 2017)
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c8294ed55231 - , , , , :
Development and launching of an application-oriented test rig for wear investigations in sheet-bulk metal forming
In: THE"A" Coatings 2017 - , , , :
Dynamic correction of oscillatory forces during ultrasonic-assisted metal forming
In: Production Engineering 11 (2017), S. 455-465
ISSN: 0944-6524
DOI: 10.1007/s11740-017-0762-3 - , , :
Compression testing of martensitic stainless steel with superimposed ultrasonic vibration
In: Procedia Engineering 207 (2017), S. 1970-1975
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.10.1100 - , , , , , , , :
Hot stamping of ultra-high strength steel parts
In: CIRP Annals - Manufacturing Technology 66 (2017), S. 755-777
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2017.05.007 - , , , , :
Investigation of the tribological behaviour of alloyed hot stamping tools in contact with AlSi coated 22MnB5 - , , , :
Investigation of the Adhesive Wear Behavior of Alloyed and Not Alloyed Hot Stamping Tools in Contact with 22MnB5
In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Hrsg.): (Hrsg.): Hot Sheet Metal Forming of high-Performance Steel - CHS2, Wissenschaftliche Skripten, 2017 2017 - , :
Analysis of the Young’s modulus reduction and cyclic hardening of HCT780X
MATFEM Conference 2017
In: Gese, H. (Hrsg.): Proc. of MATFEM Conference 2017 2017 - , :
Process-oriented validation of hardening models in a cyclic bending test
In: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom 2017
DOI: 10.1016/j.proeng.2017.10.959 - , , :
Effect of temperature and punch speed on forming limit strains of AA5182 alloy in warm forming and improvement in failure prediction in finite element analysis
In: Journal of Strain Analysis For Engineering Design 52 (2017), S. 258-273
ISSN: 0309-3247
DOI: 10.1177/0309324717704995 - , , :
An incremental analysis of a deep drawing steel’s material behaviour undergoing the predeformation using drawbeads
In: 36th IDDRG Conference – Materials Modelling and Testing for Sheet Metal Forming (Hrsg.): IOP Conf. Series: Journal of Physics: Conf. Series 896 (2017) 011001 2017
DOI: 10.1088/1742-6596/896/1/011001 - , , :
Investigation of process induced changes of material behaviour using a drawbead in forming operations
7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017 (Aachen, 5. Oktober 2017 - 6. Oktober 2017) - , , , , , , , , :
Laser based additive manufacturing in industry and academia
In: CIRP Annals - Manufacturing Technology 66 (2017), S. 561-583
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2017.05.011 - , , , , , , :
Data-Based Control of A Multi-Step Forming Process
In: Proc. International Deep Drawing Research Group Conf. IDDRG 2017 2017
DOI: 10.1088/1742-6596/896/1/012037 - , , , :
Designing, manufacturing and processing of Tailored Blanks in a sheet-bulk metal forming process
In: 45th SME North American Manufacturing Research Conference, NAMRC 45, LA, USA 2017
DOI: 10.1016/j.promfg.2017.07.059 - , , , , :
Analysis of fundamental dependencies between manufacturing and processing Tailored Blanks in sheet-bulk metal forming processes
In: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom 2017
DOI: 10.1016/j.proeng.2017.10.779 - , , , , :
Umformtechnische Herstellung von Funktionsbauteilen aus Tailored Blanks durch Blechmassivumformverfahren
22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017 (, 15. März 2017 - 16. März 2017)
In: 22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017 2017 - , , , :
Werkzeugseitige Beeinflussung der tribologischen Bedingungen beim Presshärten
In: Merklein, M. (Hrsg.): Tagungsband zum 12. Erlanger Workshop Warmblechumformung 2017 - , , , :
Investigation of Tribological Conditions within Partial Hot Stamping
In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Hrsg.): Hot Sheet Metal Forming of high-Performance Steel - CHS2 2017 - , , , :
Tribological behavior of Zn coated 22MnB5 in hot stamping
In: Steels in Cars and Trucks 2017 - , , :
Investigation of the influence of process parameters on adhesive wear under hot stamping conditions
In: Journal of Physics: Conference Series 2017
DOI: 10.1088/1742-6596/896/1/012048 - , , , , , , :
Analysis of tool-sided surface modifications for dry deep drawing of deep drawing steel and aluminum alloys in a model process
In: Dry Metal Forming Open Access Journal 3 (2017), S. 30-40
Open Access: http://elib.suub.uni-bremen.de/edocs/00105725-1.pdf - , , , , , , :
A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties
In: Optics and Laser Technology 89 (2017), S. 31-40
ISSN: 0030-3992
DOI: 10.1016/j.optlastec.2016.09.042 - , :
A new approach for the determination of the linear elastic modulus from uniaxial tensile tests of sheet metals
In: Journal of Materials Processing Technology 241 (2017), S. 64-72
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2016.10.024 - , , , :
Numerical and experimental investigation of dry deep drawing of aluminum alloys with conventional and coated tool surfaces
In: International Conference on the Technology of Plasticity (ICTP) 2017
DOI: 10.1016/j.proeng.2017.10.989 - , , , , , , :
Reibungsreduzierung in EHD-Kontakten durch mikrostrukturierte Bauteiloberflächen - Auslegung, Gestaltung und umformtechnische Herstellung
58. Tribologie-Fachtagung 2017. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. (Göttingen, 25. September 2017 - 27. September 2017)
In: Gesellschaft für Tribologie e. V. (Hrsg.): 58. Tribologie-Fachtagung. 2017, Son-derband Abschlusskolloquium „Ressourceneffiziente Konstruktionselemente“ SPP 1551 der DFG 2017
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c82950b18342 - , , , , :
Manufacturing of tailored blanks by flexible rolling and its application in a sheet-bulk metal forming process
SCT2017
In: Wieland, H. (Hrsg.): Proceedings SCT2017 2017 - , , , , , , , , , , :
Fluid elements in machine tools
In: CIRP Annals - Manufacturing Technology 66 (2017), S. 611-634
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2017.05.008 - , , , :
Analysis of Production Limits in Manufacturing of Micro Coined Structures
In: ASPEN/ASPE 2017 Spring Topical Meeting - Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications 2017 - , , , :
Investigation of Production Limits in Manufacturing Microstructured Surfaces Using Micro Coining
In: Micromachines 8 (2017), S. None
ISSN: 2072-666X
DOI: 10.3390/mi8110322 - , , , , :
Investigation of tribological behaviour of a-C:H coatings for dry deep drawing of aluminium alloys
In: Tribology International (2017)
ISSN: 0301-679X
DOI: 10.1016/j.triboint.2017.05.031
2016
- , , , , , , , :
A ROUND ROBIN STUDY FOR LASER BEAM MELTING IN METAL POWDER BED
In: South African Journal of Industrial Engineering 27 (2016), S. 30-42
ISSN: 1012-277X
DOI: 10.7166/27-2-1201
URL: http://sajie.journals.ac.za/pub/article/view/1201/682 - , , , :
Local adjustment of surface integrity of forming tools by adaptation of tool making process
In: Procedia CIRP 45 (2016), S. 339-342
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.02.045 - , :
Strahlbearbeitung von Fließpresswerkzeugen - Integration von Strahloperationen in den Werkzeugherstellungsprozess
In: wt Werkstattstechnik - Online 11/12 (2016), S. 835-840
ISSN: 1436-4980 - , , :
Einfluss anisotropen Materialverhaltens von Aluminium-Glänzwerkstoffen auf die Rissausbildung beim Lochaufweitversuch
In: H.-J. Christ (Hrsg.): Tagung Werkstoffprüfung 2016 2016 - , , , , , , :
Induction heat treatment of sheet-bulk metal-formed parts assisted by water-air spray cooling
In: Steel Research International 87 (2016), S. 1220-1227
ISSN: 1611-3683
DOI: 10.1002/srin.201500404 - , , , , , , :
Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes
In: Journal of Materials Engineering and Performance 25 (2016), S. 1136-1142
ISSN: 1059-9495
DOI: 10.1007/s11665-016-1908-8 - , , , , :
Enhancement of a Constitutive Friction Law by Considering Plastic Smoothing of Rough Surfaces in Dependency on the Bulk Stresses
In: Tribology in Industry 38 (2016), S. 163-175
ISSN: 0354-8996
Open Access: http://www.tribology.fink.rs/journals/2016/2016-2/4.pdf
URL: http://www.tribology.fink.rs/journals/2016/2016-2/4.pdf - , , :
Investigation of the Unloading Yield Effect in Aluminum and Magnesium Sheet Metal Alloys at Room Temperature
In: Key Engineering Materials 716 (2016), S. 331-336
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.716.331 - , , , , :
Simulationsbasierte Untersuchung eines neuartigen Fügekonzepts für Rotoren elektrischer Maschinen
In: simufact engineering GmbH (Hrsg.): Tagungsband 17. RoundTable - Simulating Manufacturing 2016 - , , :
Effect of Residual Stress on the Distortion of Microembossed Metal Inserts for Assembly Injection Moulding
In: Tosello, G.; Nørgaard Hansen, H.; Ehmann, K.; Dimov, S. (Hrsg.): 4M/IWMF2016 Conference: Proceedings of 11th International Conference on Multi-Material Micro Manufacture 2016 - , , , , , :
Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW 6060 T4 extrusion profiles - Part A
In: Production Engineering 10 (2016), S. 383–389
ISSN: 0944-6524 - , :
Material flow control in tailor welded blanks by a combination of heat treatment and warm forming
In: CIRP Annals - Manufacturing Technology 65 (2016), S. 305-308
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2016.04.124 - , , , , , :
Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW‑6060 T4 extrusion profiles – Part B
In: Production Engineering 10 (2016), S. 391–398
ISSN: 0944-6524 - , , , , , , , , , , , , , :
Manufacturing of functional elements by sheet-bulk metal forming processes
In: Production Engineering 10 (2016), S. 63-80
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0662-y - , , :
A new strategy for manufacturing tailored blanks by a flexible rolling process
In: Materials Science Forum 854 (2016), S. 99-105
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.854.99 - , , , :
Tool Load Sensitivity against Multidimensional Process Influences in Microblanking of Thin Metal Foils with Silicon Punches
In: Journal of Manufacturing Science and Engineering 138 (2016), Art.Nr.: 091004
ISSN: 1087-1357
DOI: 10.1115/1.4033522 - , , , :
Fundamental Studies on a Novel Die Concept for Round-Point Shear-Clinching
In: AIP Conference Proceedings 1769 (2016), S. 1-6
ISSN: 0094-243X
DOI: 10.1063/1.4963497 - , , , :
Mechanical properties of an innovative shear-clinching technology for ultra-high-strength steel and aluminium in lightweight car body structures
In: Welding in the World 60 (2016), S. 613-620
ISSN: 0043-2288
DOI: 10.1007/s40194-016-0313-0 - , , , , :
In-Line strategies and methods to reduce balancing efforts within rotor production for electric drives
6th International Electric Drives Production Conference (EDPC) (Nürnberg)
DOI: 10.1109/EDPC.2016.7851310 - , , , , , , , , , , , , :
Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming
In: Production Engineering 10 (2016), S. 5-15
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0656-9 - , , , , :
Connection strength of additive manufactured tool elements to the substrate
DOI: 10.4028/www.scientific.net/KEM.716.389 - , , , , , , , , , :
Comparison of process characteristics and resulting microstructures of maraging steel 1.2709 in Additive Manufacturing via Laser Metal Deposition and Laser Beam Melting in Powder Bed
6th International Conference on Additive Technologies (Nürnberg, 29. November 2016 - 30. November 2016) - , , , , , , , , , , , , , , , , , :
Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming
In: Production Engineering 10 (2016), S. 37-50
ISSN: 0944-6524
DOI: 10.1007/s11740-015-0651-6
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_5695fddc4e358 - , , :
Basic numerical analysis of a “Samanta” based forward extrusion process
In: Advanced Materials Research 1140 (2016), S. 27-34
ISSN: 1022-6680 - , , , , :
A non-invasive form finding approach with application to metal forming
In: Production Engineering 10 (2016), S. 93-102
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0659-6 - , , , :
Investigation of the Anisotropic Strain Rate Dependency of AA5182-O and DC04 for Different Stress States
In: Advanced Materials Research 1140 (2016), S. 35-42
ISSN: 1022-6680 - , , :
Einfluss der Auflösung des Dehnungsfeldes auf die Kennwertermittlung im Scherzugversuch von Aluminium- und Magnesiumlegierungen
Tagung Werkstoffprüfung 2016
In: H.-J. Christ (Hrsg.): Tagung Werkstoffprüfung 2016 2016 - , , , :
Applicability of blasted blanks for adaption of tribological conditions in sheet-bulk metal forming
In: Procedia CIRP 45 (2016), S. 239-242
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.02.055 - , , , , , , , , , , , , , , , :
Tribological measures for controlling material flow in sheet-bulk metal forming
In: Production Engineering 10 (2016), S. 459 - 470
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0695-2
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_57ecc7754021d - , , , , , , , , :
Surface modifications for adaption of tribological conditions in sheet-bulk metal forming processes
THE "A" Coatings (Hannover, 31. März 2016 - 1. April 2016)
In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Hrsg.): Proceedings THE "A" Coatings, Garbsen: 2016
URL: https://www.archiv.mfk.tf.fau.de/?file=pubmfk_5c6ad2c90633d - , , , , :
Interaction of Additive Manufacturing and Forming
6th International Conference on Additive Technologies iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (Hrsg.): Proceedings of 6th International Conference on Additive Technologies 2016 - , , , , :
Influence of Cutting Processes on Edge Cracking Sensitivity of Bright Finishing Alloys
In: Key Engineering Materials 716 (2016), S. 443-450
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.716.443 - , , , , :
Tailoring material properties in forming technology by a local heat treatment
In: Gronostajski, Z. (Hrsg.): Advanced Metal Forming Processes in Automotive Industry 2016 - , :
Introduction to sheet-bulk metal forming
In: Production Engineering 10 (2016), S. 1-3
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0661-z - , :
Accumulative Roll Bonding of precipitation-hardenable aluminum alloys of the 6000 series in a warm rolling process
In: Proc. ROLLING Conference 2016 - , :
Effect of a Local Laser Heat Treatment on the Formability of Multi-layered 6000 Series Aluminum Alloys
In: Physics Procedia 83 (2016), S. 560-567
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.058 - , , , :
Hybrid Additive Manufacturing Technologies - An Analysis regarding Potentials and Applications
In: Physics Procedia 83 (2016), S. 549-559
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.057 - , , , :
Scale-up of Innovative Forming Solutions from Scientific Fundamentals to Industrial Applications - , , :
Improvement of the Formability of Aluminum Extrusion Profiles by a Tailored, Local Short-Term Heat Treatment
In: Dimitrov Dimiter, Oosthuizen Tiaan (Hrsg.): Proceedings COMA16 2016 - , , , , , , :
Innovative approaches for controlling the material flow in sheet-bulk metal forming processes
In: Manufacturing Review 3 (2016), S. 1-17
ISSN: 2265-4224
DOI: 10.1051/mfreview/2016001 - , , , , , , :
Tailored modifications of amorphous carbon based coatings for dry deep drawing
In: Dry Metal Forming Open Access Journal 2 (2016), S. 25-39
Open Access: http://nbn-resolving.de/urn:nbn:de:gbv:46-00105203-10 - , , , , :
Hot Stamping of Boron Steel Sheets with Tailored Properties: a Review
In: Journal of Materials Processing Technology 228 (2016), S. 11-24
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2015.09.023 - , :
Ultrasonic-Assisted Upsetting of Steel with 15 kHz Oscillation Frequency
In: Key Engineering Materials 716 (2016), S. 544-551
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.716.544 - , , , :
Numerische Untersuchung des Werkstoffflusses beim Fügen artungleicher Werkstoffe mittels Schneidclinchen
In: Brosius, A. (Hrsg.): Tagungsband SFU 2016 2016 - , , , :
Investigation of the wear behavior for not alloyed and alloyed hot forming tools
In: Wulfsberg, J.P; Fette, M.; Montag, T. (Hrsg.): WGP Congress 2016 2016 - , , , , :
Oberflächenmodifizierung von Presshärtewerkzeugen durch einen drahtbasierten Laserstrahllegierungsprozess
11. Erlanger Workshop Warmblechumformung - , , , , , , , , :
Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses
In: Production Engineering 10 (2016), S. 399-407
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0685-4 - , , , , , , :
Data-driven inline optimization of the manufacturing process of car body parts
In: IOP Conference Series: Materials Science and Engineering 159 (2016), S. 012002
ISSN: 1757-8981
DOI: 10.1088/1757-899X/159/1/012002 - , :
Analyse der Abbildbarkeit des dehnungsabhängigen Bauschinger-Effekts mithilfe istrop-kinematischer Modelle
XXXV. Verformungskundliches Kolloquium
In: B. Buchmayr (Hrsg.): Tagungsband XXXV. Verformungskundliches Kolloquium 2016 - , , , , , :
Additive Manufacturing of Functional Elements on Sheet Metal
In: Physics Procedia 83 (2016), S. 797-807
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.082
URL: http://www.sciencedirect.com/science/article/pii/S1875389216301894 - , , , , :
Numerical Investigation for Superplastic Forming Tool Development Within the Combined Process Chain of Forming and Additive Manufacturing
Int. Conf. Competitive Manufacturing (Stellenbosch, Südafrika, 27. Januar 2016 - 29. Januar 2016)
In: Dimitrov, D; Oosthuizen, T. (Hrsg.): Int. Conf. Competitive Manufacturing 2016
URL: https://scholar.sun.ac.za/items/58ebf8f5-8f53-4443-b13f-cdca8bef39ab - , , , :
Interaction of various functional elements in thin-walled cups formed by a sheet-bulk metal forming process
In: K. Saanouni (Hrsg.): NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes 2016
DOI: 10.1051/matecconf/20168007003 - , , :
Investigation of Friction Conditions at Elevated Temperatures for Hot Stamping
7th International Conference on Tribology in Manufacturing Processes
In: Thai Tribology Association (TTA) (Hrsg.): Proceedings 7th International Conference on Tribology in Manufacturing Processes 2016 - , , , :
Einfluss der Werkzeugtemperatur auf die tribologischen Bedingungen beim Presshärten
In: Merklein, M. (Hrsg.): 11. Erlanger Workshop Warmblechumformung 2016 - , , :
Investigation of surface finishing of carbon based coated tools for dry deep drawing of aluminium alloys
In: IOP Conference Series: Materials Science and Engineering 159 (2016), S. 12022_1-10
ISSN: 1757-8981
DOI: 10.1088/1757-899X/159/1/012022 - , , , :
Investigation of Tribological Behavior of Carbon Coatings in Dry Sheet Metal Forming
THe "A" Coatings - 12th International Conference in Manufacturing Engineering (Hannover, 31. März 2016 - 1. April 2016)
In: Proceedings 12th International Conference THE "A" Coatings 2016, Hannover: 2016 - , :
Cyclic tension test of AZ31 magnesium alloy at elevated temperature realized in a miniaturized uniaxial tensile test setup
In: Materials Science Forum 854 (2016), S. 112-117
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.854.112 - , :
Experimental and numerical investigation of a strain rate controlled hydraulic bulge test of sheet metal
In: Journal of Materials Processing Technology 235 (2016), S. 121-133
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2016.04.022 - , :
Influence of specimen size and sheet thickness on the material behavior of AZ31B under uniaxial tension
In: IOP Conference Series: Materials Science and Engineering 159 (2016), S. 1-8
ISSN: 1757-8981
DOI: 10.1088/1757-899X/159/1/012016 - , :
Magnesium - Leichtbauwerkstoff der Blechumformung: Relevanz einer exakten Werkstoffcharakterisierung und -modellierung
In: Konstruktion 9 (2016), S. IW8-IW10
ISSN: 0720-5953 - , :
Edge crack sensitivity of lightweight materials under different load conditions
In: IOP Conference Series: Materials Science and Engineering 159 (2016), S. 1-8
ISSN: 1757-8981
DOI: 10.1088/1757-899X/159/1/012017 - , , , :
Investigations on load spectrum and adhesive wear development in hot stamping operations
In: K. Bobzin; K.-D. Bouzakis; B. Denkena; H.J. Maier; M. Merklein (Hrsg.): The "A" Coatings Conference Proceedings 2016 - , , , , :
Investigation of Tribological Behaviour of a-C:H Coatings for Dry Deep Drawing of Aluminium Alloys
The 17th Nordic Symposium on Tribology - NORDTRIB 2016 (Hämeenlinna, 14. Juni 2016 - 17. Juni 2016)
In: Abstracts Programme 2016
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c8f7bff42a36
2015
- , , , , , :
High Power Laser Beam Melting of Ti-6Al-4V on Formed Sheet Metal to achieve Hybrid structures
Laser 3D Manufacturing II (The Moscone Center San Francisco California, 7. Februar 2015 - 12. Februar 2015)
In: Henry Helvajian, Alberto Piqué, Martin Wegener, Bo Gu (Hrsg.): Proc. of SPIE Vol. 9353, 93530X 2015
DOI: 10.1117/12.2082919
URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2208237&resultClick=1 - , , :
Innovative Aluminium Lightweight Design by the Combination of Accumulative Roll Bonding and Local Intermediate Heat Treatment
In: Materials Today 2 (2015), S. 4992-4997
ISSN: 1369-7021
DOI: 10.1016/j.matpr.2015.10.088 - , , , , :
Manufacturing of Innovative Aluminum Components by Combining Shear Cutting Operation and Tailor Heat Treated Blank Technique
5th International Conference on Accuracy in Forming Technology
In: Landgrebe, D.; Drossel, W.-G.; Putz, M. (Hrsg.): 5th International Conference on Accuracy in Forming Technology 2015 - , , , :
Influence of metal inserts with microformed edges on subsequent injection assembly moulding for media tight electronic systems
4th International Conference on New Forming Technology, ICNFT 2015
DOI: 10.1051/matecconf/20152109013 - , , , , :
Embossing of Metal Inserts for Subsequent Assembly Injection Moulding of Media Tight
In: Key Engineering Materials 639 (2015), S. 99-106
ISSN: 1013-9826 - , , , , :
Embossing of metal inserts for subsequent assembly injection moulding of media tight electronic systems
In: Key Engineering Materials 639 (2015), S. 99-106
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.99 - , , , :
Influence of tailored blanks on forming of cold forged functional elements in a sheet bulk metal forming process
METEC & 2nd ESTAT
In: Stahl-Institut VDEh (Hrsg.): Proceedings METEC & 2nd ESTAT 2015 - , , :
Sheet-Bulk Metal Forming
In: Tekkaya, A.E.; Homberg, W.; Brosius, A. (Hrsg.): 60 Excellent Inventions in Metal Forming 2015
DOI: 10.1007/978-3-662-46312-3_16 - , , , , :
Determination of the mechanical properties of hot stamped parts from numerical simulations
In: Procedia CIRP 33 (2015), S. 167-172
ISSN: 2212-8271
DOI: 10.1016/j.procir.2015.06.031 - , , , , , , :
High-Feed Milling of Tailored Surfaces for Sheet-Bulk Metal Forming Tools
In: Production Engineering 9 (2015), S. 215-223
ISSN: 0944-6524
DOI: 10.1007/s11740-014-0597-0 - , , :
Flexible Rolling of Process Adapted Semi-finished Parts and its Application in a Sheet-Bulk Metal Forming Process
In: Key Engineering Materials 639 (2015), S. 259-266
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.259 - , , :
New process strategies to manufacture tailored blanks out of DP600 by orbital forming
In: Applied Mechanics and Materials 794 (2015), S. 144-151
ISSN: 1660-9336 - , , :
Improved Tool Performance in Microblanking of Thin Metal Foils Through Defined Cutting Edge Modification of Silicon Punches
4M/ICOMM2015 Conf.
In: Annoni, M.; Fassi, I.; Wiens, G.J.; Dimov, S. (Hrsg.): Proc. 4M/ICOMM2015 Conf. 2015 - , , , , , :
Modelling kinetics of phase transformation for the indirect hot stamping process to focus on car body parts with tailored properties
In: Journal of Materials Processing Technology 228 (2015), S. 59-67
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2015.01.003 - , , , :
Qualification of Laser Based Additive Production for Manufacturing of Forging Tools
In: EDP Sciences (Hrsg.): Journal of Manufacturing Review 2015
DOI: 10.1051/matecconf/20152108010 - , , , :
Tailor-Made Forging Tools by Laser Metal Deposition
In: Key Engineering Materials(2015) 2015
DOI: 10.4028/www.scientific.net/KEM.651-653.707 - , , , , :
Process Design of Aluminum Tailor Heat Treated Blanks
In: Materials 8 (2015), S. 8524-8538
ISSN: 1996-1944
DOI: 10.3390/ma8125476 - , , , :
Effiziente maßgeschneiderte Wärmebehandlung von Blechhalbzeugen in der Serienfertigung
In: wt Werkstattstechnik - Online 4 (2015), S. 246-250
ISSN: 1436-4980 - , , , :
Effiziente maßgeschneiderte Wärmebehandlung von Blechhalbzeugen in der Serienfertigung
In: wt Werkstattstechnik - Online 105 (2015), S. 246-250
ISSN: 1436-4980 - , , , , , , , , , , , :
Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed
Lasers in Manufacturing Conference 2015 (Messe München, 22. Juni 2015 - 25. Juni 2015)
In: Proceedings of Laser in Manfacturing Conference 2015 2015
Open Access: http://www.wlt.de/lim/Proceedings/Stick/PDF/Contribution146_final.pdf
URL: http://www.wlt.de/lim/Proceedings/Stick/4.html - , , , , , , :
Development of a feature adapted measurement evaluation strategy
MacroScale 2014 - Recent developments in traceable dimensional measurements (Wien, 28. Oktober 2014 - 30. Oktober 2014)
DOI: 10.7795/810.20150325P - , , , , :
Analysis of Effectiveness of Locally Adapted Tribological Conditions for Improving Product Quality in Sheet-Bulk Metal Forming
In: Applied Mechanics and Materials 794 (2015), S. 81-88
ISSN: 1660-9336 - , , , , :
Locally Adapted Tribological Conditions as a Method for Influencing the Material Flow in Sheet-Bulk Metal Forming Processes
In: Key Engineering Materials 639 (2015), S. 267-274
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.267 - , , :
Numerical investigation of dry and lubricated sheet metal forming processes
In: Aldo Ofenheimer, Cecilia Poletti, Daniela Schalk-Kitting, Christof Sommitsch (Hrsg.): Key Engineering Materials 2015
DOI: 10.4028/www.scientific.net/KEM.651-653.1029 - , , :
Influence of Tool Surface on Tribological Conditions in Conventional and Dry Sheet Metal Forming
In: International Journal of Precision Engineering and Manufacturing - Green Technology 2 (2015), S. 131-137
ISSN: 2198-0810
DOI: 10.1007/s40684-015-0017-8 - , :
Influence of Pre-Strain and Simulated Paint-Bake on Mechanical Properties of High Strength Aluminium Alloy AA7020
In: Applied Mechanics and Materials 805 (2015), S. 115-122
ISSN: 1660-9336 - , , :
Experimental investigation of heat-treated aluminum profiles
In: Key Engineering Materials 651-653 (2015), S. 59-64
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.651-653.59 - , , , , :
Sheet-bulk metal forming – forming of functional components from sheet metals
4th International Conference on New Forming Technology
In: Y. Qin, T.A. Dean, J. Lin, S.J. Yuan, F. Vollertsen (Hrsg.): Proceedings of the 4th International Conference on New Forming Technology 2015 - , , , , :
Development of a New Method for Producing Plane Expanded Metal by Laser Cutting and Forming of Metal Plates under Uniaxial Tension
In: Key Engineering Materials 639 (2015), S. 131-136
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.131 - , , :
Numerical investigations on the influence of process parameters on the forming of gears in forward extrusion
In: Applied Mechanics and Materials 805 (2015), S. 154-161
ISSN: 1660-9336 - , , :
Influence of a short-term heat treatment on the formability and ageing characteristics of aluminum profiles
Lasers in Manufacturing Conference
In: WLT e.V. (Hrsg.): Lasers in Manufacturing Conference 2015 - , , :
Plastic flow and its control in sheet-bulk metal forming of thin-walled functional components
In: CIRP Annals - Manufacturing Technology 64 (2015), S. 245-248
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2015.04.078 - , , , , :
A new approach to the evaluation of forming limits in sheet metal forming
In: Key Engineering Materials 639 (2015), S. 333-338
ISSN: 1013-9826
URL: https://www5.informatik.uni-erlangen.de/Forschung/Publikationen/2015/Merklein15-ANA.pdf - , , , , :
Mechanical Testing of Additive Manufactured Metal Parts
In: Key Engineering Materials 651-653 (2015), S. 713-718
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.651-653.713 - , , , , , , , :
Investigation of Tribological Systems for Dry Deep Drawing by Tailored Surfaces
In: Dry Metal Forming Open Access Journal 1 (2015), S. 42-56
Open Access: http://www.drymetalforming.de/images/pdf/DMFOAJFMT_1_2015_042-056_Merklein.pdf - , , , , , , , :
Development and Evaluation of Tool Sided Surface Modifications for Dry Deep Drawing of Steel and Aluminum Alloys
In: Dry Metal Forming Open Access Journal 1 (2015), S. 113-120
Open Access: http://www.drymetalforming.de/images/DMFOAJFMT_1_2015_121-133.pdf - , , , :
Innovative manufacturing solutions for the efficient production of car bodies
In: Schmeing, K. (Hrsg.): Forming in Car Body Engineering 2015 2015 - , , , :
Tool System for Ultrasonic-Assisted Forming and Material Characterisation with 15 kHz Oscillation Frequency
In: Applied Mechanics and Materials 794 (2015), S. 427-434
ISSN: 1660-9336 - , :
Ultraschallunterstützte Umformung von Metallen - Entwicklung eines Prüfstands zur Werkstoffcharakterisierung mit 15 kHz Schwingungsüberlagerung
In: wt Werkstattstechnik - Online 105 (2015), S. 715-721
ISSN: 1436-4980 - , , , :
FE-based study of the cutting operation within joining by forming of dissimilar materials using shear-clinching technology
In: Advanced Materials Research 794 (2015), S. 304-311
ISSN: 1022-6680 - , , , , :
Development of a testing method for the identification of friction coefficients for numerical modeling of the shear-clinching process
In: Key Engineering Materials 639 (2015), S. 469-476
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.469 - , , , , :
Modeling of the Plastic Characteristics of AA6082 for the Friction Stir Welding Process
In: Key Engineering Materials 639 (2015), S. 309-316
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.309 - , , :
Evaluation of kinematic hardening models for multiple stress reversals under continuous cyclic shearing and multi - step bending
LS-DYNA Forum 2015
In: LS-DYNA Forum 2015 2015 - , , :
Validation of kinematic hardening parameters from different stress states and levels of plastic strain with the use of the cyclic bending test
In: Key Engineering Materials 639 (2015), S. 385-392
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.385 - , :
Sheet-bulk metal forming - potential and challenges of a new class of forming processes
PLASTICITY ’15: The Twenty First International Symposium on Plasticity and its Current Applications
In: Khan, A.; Yu, H.Y. (Hrsg.): Proceedings of PLASTICITY ’15: The Twenty First International Symposium on Plasticity and its Current Applications 2015 - , , :
Characterization and Description of Friction Conditions for Hot Stamping and Partial Hot Stamping of Ultra High Strength Steel
METEC & 2nd ESTAD
In: Stahl-Institut VDEh (Hrsg.): Proceedings METEC & 2nd ESTAD 2015 - , , :
Untersuchung der Reibbedingungen beim Presshärten mittels Streifenziehversuchen bei erhöhten Temperaturen
10. Erlanger Workshop Warmblechumformung (Erlangen)
In: M. Merklein (Hrsg.): 10. Erlanger Workshop Warmblechumformung 2015 - , , :
Experimental Study of a Microforging Process of Parallel Ribs from Metal Strip
4M/ICOMM2015 Conf.
In: Annoni, M.; Fassi, I.; Wiens, G.J.; Dimov, S. (Hrsg.): Proc. 4M/ICOMM2015 Conf. 2015 - , :
Characterization of the shear stress state under non-proportional strain paths realized by biaxial stretching in the Marciniak Test
In: Materials Today: Proceedings 2S (2015), S. S98-S106
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2015.05.025 - , :
Charakterisierung des Verfestigungsverhaltens der Magnesiumlegierung AZ31 im Scherspannungszustand bei erhöhter Temperatur
In: Stahlinstitut VDEh (Hrsg.): Tagung Werkstoffprüfung 2015 2015 - , :
Influence of stress relaxation after uniaxial pre-straining on subsequent plastic yielding in the uniaxial tensile test of sheet metal
In: Key Engineering Materials 639 (2015), S. 377-384
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.377 - , :
Investigation of Influencing Parameters for Tribological Conditions in Dry Forming Processes
In: Acta Metallurgica Sinica (English Letters) 28 (2015), S. 1435-1441
ISSN: 1006-7191 - , :
Numerical Prediction of Failure within Small Curvature Bending of Advanced High Strength Steels
In: Key Engineering Materials 639 (2015), S. 419-426
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.639.419 - , :
Parameters Influencing Adhesive Wear Behavior within Hot Stamping Operations
5th Int. Conf. Hot Sheet Metal Forming of High-Performance Steel
In: Steinhoff, K; Oldenburg, M.; Prakash, B. (Hrsg.): Proc. 5th Int. Conf. Hot Sheet Metal Forming of High-Performance Steel 2015 - , , :
Experimental and numerical investigations on a pressure dependent friction model
In: Merklein, M. (Hrsg.): Key Engineering Materials 2015
DOI: 10.4028/www.scientific.net/KEM.639.403
2014
- , , , , , , , :
A round robin study for Laser Beam Melting in Metal Powder Bed: Comparing mechanical characteristics with system technology variation
15th Annual Conference of RAPDASA 2014
In: Proc. 15th Annual Conference of RAPDASA 2014 2014 - , , , , , :
Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics
In: Physics Procedia 56 (2014), S. 90-98
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.102
URL: http://www.sciencedirect.com/science/article/pii/S1875389214002478 - , , , :
Smart FE-based tool design in cold forging
In: Advanced Materials Research 1018 (2014), S. 309-316
ISSN: 1022-6680
DOI: 10.4028/www.scientific.net/AMR.1018.309 - , :
Improvement of surface integrity of cold forging tools by adaption of tool making process
In: Production Engineering 8 (2014), S. 131-141
ISSN: 0944-6524
DOI: 10.1007/s11740-013-0522-y - , :
Influence of surface integrity on the tribological performance of cold forging tools
In: Procedia CIRP 13 (2014), S. 61-66
ISSN: 2212-8271
DOI: 10.1016/j.procir.2014.04.011 - , :
On the tribological influence of coatings in cold forging
11th Int. Conf. THE "A" Coatings in Manufacturing Engineering
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Hrsg.): Proc. 11th Int. Conf. THE "A" Coatings in Manufacturing Engineering 2014 - , , , , , :
Innovative Tribological Systems in Sheet Metal Forming - Revolution in the Press Shop?
11th Int. Conf. THE "A" Coatings in Manufacturing Engineering
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Hrsg.): Proc. 11th Int. Conf. THE "A" Coatings in Manufacturing Engineering 2014 - , , :
Use of FEM and DoE to reduce the forming force during cold extrusion of prismatic cell housings
In: Key Engineering Materials 611-612 (2014), S. 989-996
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.989 - , :
Herstellung hochfester Aluminiumblechwerkstoffe mittels Accumulative Roll Bonding
Internationale Konferenz "Neuere Entwicklungen in der Blechumformung" (Fellbach, 13. Mai 2014 - 14. Mai 2014) - , :
Laser-assisted Property Gradients in Multi-layered Aluminum
In: Physics Procedia 56 (2014), S. 1419-1426
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.073 - , :
Manufacturing of high-strength aluminum sheet metal in the Accumulative Roll Bonding process
New Developments in Sheet Metal Forming
In: Liewald, M. (Hrsg.): New Developments in Sheet Metal Forming 2014 - , :
Characterization of mechanical properties in processed friction stir welded high-strength aluminum alloy blanks
In: Procedia Engineering 81 (2014), S. 2098-2103
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.292 - , :
Innovative Prozesskette für Strukturleichtbauteile - Verarbeitung von Aluminium Tailored Blanks bei erhöhten Temperaturen
In: wt Werkstattstechnik - Online 10 (2014), S. 631-636
ISSN: 1436-4980 - , , , , :
Investigations and approaches on material flow of non-uniform arranged cavities in sheet bulk metal forming processes
In: Procedia Engineering 81 (2014), S. 401-406
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.013 - , , :
Blank hydroforming using granular material as medium - investigations on leakage
In: Procedia Engineering 81 (2014), S. 1035-1042
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.137 - , :
Determination of friction coefficients in deep drawing by modification of Siebel's formula for calculation of ideal drawing force
In: Production Engineering 8 (2014), S. 577-584
ISSN: 0944-6524 - , , :
Influence of Process Errors on the Tool Load in Microblanking of Thin Metal Foils with Silicon Punches
9th International Conference on MicroManufacturing (ICOMM 2014) (Singapore, 25. März 2014 - 28. März 2014) - , , :
Performance of Silicon Punches for Microblanking of Thin Metal Foils
4th International Conference on Nanomanufacturing (nanoMan) - , , , :
Titanium metal sheet structures of various wall thicknesses with additional functional elements prepared by selective electron beam melting in a powder bed
5th International Conference on Additive Technologies - iCAT2014
In: Drstvensek, I. (Hrsg.): 5th International Conference on Additive Technologies - iCAT2014 2014 - , , , :
Influence of Pre-straining and Heat Treatment on the Yield Surface of Precipitation Hardenable Aluminum Alloys
In: Physics Procedia 56 (2014), S. 1400-1409
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.070 - , , , :
Efficient Aluminum - Qualifizierung des Einsatzes höchstfester Aluminiumlegierungen im Karosseriebau
1. Green Factory Bavaria Kolloquium 2014 - Engergieeffiziente Produktion
In: Franke, J.; Kreitlein, S.; Hoeft, A. (Hrsg.): Tagungsband zum 1. Green Factory Bavaria Kolloquium 2014 - Engergieeffiziente Produktion 2014 - , , , :
Numerical investigation of temperature and phase development of (deformation-) dilatometer specimens
In: Larkiola, J. (Hrsg.): Material Forming - ESAFORM 2014 2014
DOI: 10.4028/www.scientific.net/KEM.611-612.1539 - , , , :
Evaluierung von Modellen zur Beschreibung der Umwandlungsplastizität durch experimentelle Untersuchungen an einem Wälzlagerstahl
9. Erlanger Workshop Warmblechumformung
In: Merklein, M. (Hrsg.): 9. Erlanger Workshop Warmblechumformung 2014 - , , , :
Numerische Untersuchungen der Temperatur- und Phasenentwicklung in (Umform-) Dilatometerproben
In: Brand, M.; Hildebrand, J.; Loose, T.; Sakkietibutra, J. (Hrsg.): Tagungsband "Simulationsforum Schweißen und Wärmebehandlung 2013" 2014 - , , , :
Untersuchung des Einflusses von Chargenschwankungen auf das Umwandlungsverhalten übereutektoider Stähle
In: W. Grellmann, H. Frenz (Hrsg.): Tagungsband Werkstoffprüfung 2014 - , , , , :
The correlation coefficient method: from the beginning to the development
Workshop Time-dependent Methods for the Evaluation of FLC
In: Institut für Virtuelle Produktion, ETH Zürich (Hrsg.): Workshop Time-dependent Methods for the Evaluation of FLC 2014 - , , , , , , , , :
Potenziale und Grenzen der Simulation in der Fertigungstechnik
15. RoundTable - Simulating Manufacturing
In: simufact engineering GmbH (Hrsg.): Tagungsband 15. RoundTable - Simulating Manufacturing 2014 - , :
Accumulative Roll Bonding: Forming Behavior, Tailored Properties and Upscaling Approach
In: Advanced Materials Research 907 (2014), S. 3-16
ISSN: 1022-6680
DOI: 10.4028/www.scientific.net/AMR.907.3 - , , :
Application of Process adapted semi-finished Parts for the Production of Thin-walled Components via Sheet-Bulk Forming
AutoMetForm / SFU 2014
In: Kawalla, R. (Hrsg.): AutoMetForm / SFU 2014 2014 - , , , :
A Review on Tailored Blanks - Production, Applications and Evaluation
In: Journal of Materials Processing Technology 214 (2014), S. 151-164
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2013.08.015 - , , :
An improvement of the time dependent method based on the coefficient of correlation for the determination of the forming limit curve
In: Marion Merklein, Jörg Franke, Hinnerk Hagenah (Hrsg.): Advanced Materials Research 2014
DOI: 10.4028/www.scientific.net/AMR.1018.215 - , , , :
Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology
In: Key Engineering Materials 611-612 (2014), S. 1413-1420
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.1413 - , , , :
Blechmassivumformung – vom Halbzeug zum Funktionsbauteil
21. Umformtechnisches Kolloquium Hannover, Industrie und Wissenschaft – Gemeinsam die Zukunft gestalten (Hannover)
In: Behrens, B. A. (Hrsg.): 21. Umformtechnisches Kolloquium Hannover, Industrie und Wissenschaft – Gemeinsam die Zukunft gestalten 2014 - , , :
Characterisation of kinematic hardening and yield surface evolution from uniaxial to biaxial tension with continuous strain path change
In: CIRP Annals - Manufacturing Technology 63 (2014), S. 297-300
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2014.03.039 - , , :
Experimental investigation of Ti-6Al-4V with a biaxial tensile test setup at elevated temperature
In: Key Engineering Materials 622-623 (2014), S. 273-278
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.622-623.273 - , :
Investigations on austenitization parameters influencing wear behavior within hot stamping
In: Procedia Engineering 81 (2014), S. 1695-1700
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.215 - , , :
Tribological conditions within hot stamping process
7th Forming Technology Forum - Warm and Hot Forming
In: Prof.Dr. Ton van den Boogaard (Hrsg.): Proc. of 7th Forming Technology Forum - Warm and Hot Forming 2014 - , , :
Experimental and numerical investigations of the tribological conditions in a cup drawing process
Int. Deep Drawing Research Group Conf. 2014 (IDDRG 2014)
In: Sfar, H. (Hrsg.): Proc. Int. Deep Drawing Research Group Conf. 2014 (IDDRG 2014) 2014 - , , :
Experimental and numerical investigations on frictional behaviour under consideration of varying tribological conditions
In: Groche, P. (Hrsg.): Advanced Materials Research 2014
DOI: 10.4028/www.scientific.net/AMR.966-967.270 - , , , :
Analysis of material behaviour in experimental and simulative setup of joining by forming of aluminium alloy and high strength steel with shear-clinching technology
In: Advanced Materials Research 966-967 (2014), S. 549-556
ISSN: 1022-6680
DOI: 10.4028/www.scientific.net/AMR.966-967.549 - , , , , :
Adaption des Ringstauchversuchs für die Untersuchung der tribologischen Bedingungen beim Fügen warmumgeformter Stähle mittels Schneidclinchen
9. Erlanger Workshop Warmblechumformung (Erlangen)
In: M. Merklein (Hrsg.): 9. Erlanger Workshop Warmblechumformung 2014 - , , , , , , , , :
A new process chain for joining sheet metal to fibre composite sheets
Material Forming ESAFORM 2014 (Finnland, 7. Mai 2014 - 9. Mai 2014)
In: Key Engineering Materials (Volumes 611 - 612) 2014
DOI: 10.4028/www.scientific.net/KEM.611-612.1468 - , , , , , , , , , :
A new process chain for joining sheet metal to fibre composite sheets
In: Key Engineering Materials 611-612 (2014), S. 1468-1475
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.1468 - , , , , :
The influence of the annealing process in the fabrication of helical needles for the suture in deep wound cavities
In: International Journal of Computer Integrated Manufacturing 27 (2014), S. 960-967
ISSN: 0951-192X
DOI: 10.1080/0951192X.2013.820350 - , , , , :
Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal
Direct Digital Manufacturing Conference DDMC 2014 (Grand Hotel Esplanade Berlin, 12. März 2014 - 13. März 2014)
In: Axel Demmer (Hrsg.): Proceedings DDMC 2014 Fraunhofer direct digital Manufacturing conference 2014
URL: http://www.ddmc-fraunhofer.de/ - , , , :
Characterization of hybrid components consisting of SEBM additive structures and sheet metal of alloy Ti-6Al-4V
In: Key Engineering Materials (2014), S. 609-614
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.611-612.609 - , , :
Analysis of Varying Properties of Semi-finished Products in Sheet-bulk Metal Forming of Functional Components
In: AIP Conference Proceedings 1567 (2014), S. 930-933
ISSN: 0094-243X - , , , , , :
Tribological aspects in manufacturing processes of microstructured components and their tribological behavior in operation
6th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation (Darmstadt, 22. Juni 2014 - 24. Juni 2014)
In: Groche, P. (Hrsg.): Proc. 6th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation 2014
DOI: 10.4028/www.scientific.net/AMR.966-967.323 - , , , :
Study of Microforging of Parallel Ribs from Metal Strip
In: Larkiola, J. (Hrsg.): Material Forming - ESAFORM 2014 2014
DOI: 10.4028/www.scientific.net/KEM.611-612.565 - , :
Characterization of the Bauschinger effect and identification of the kinematic Chaboche model by tension-compression tests and cyclic shear tests
International Deep Drawing Research Group Conf. IDDRG 2014
In: Sfar, H.; Maillard, A. (Hrsg.): Proc. International Deep Drawing Research Group Conf. IDDRG 2014 2014 - , , :
Methodik zur Parameteridentifikation des kinematischen Verfestigungsmodells nach Chaboche und Rousselier
In: W. Grellmann, H. Frenz (Hrsg.): Tagungsband Werkstoffprüfung 2014 - , , , :
Werkstoffschädigung in der Prozesskette Schneiden - Biegen
17. Workshop Simulation in der Umformtechnik
In: Liewald, M.; Tekkaya, A. E. (Hrsg.): 17. Workshop Simulation in der Umformtechnik 2014 - , , :
Bending of high-strength low-alloyed steel with respect to edge crack sensitivity caused by shearing operations
In: Procedia Engineering 81 (2014), S. 712-717
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.10.065 - , :
A New Way for the Adaption of Inverse Identified GTN-Parameters to Bending Processes
13th International LS-DYNA Users Conference 2014
In: Cathie Walton (Hrsg.): 13th International LS-DYNA Users Conference 2014 2014 - , , , , , :
Mikrostrukturierung von Tassenstößeln zur Reibungsreduzierung im Ventiltrieb – Herstellung, Simulation und tribologische Charakterisierung
In: Tribologie und Schmierungstechnik 61 (2014), S. 21-28
ISSN: 0724-3472 - , , , , , , , , , , :
An experimental and numerical investigation of different shear test configurations for sheet metal characterization
In: International Journal of Solids and Structures 51 (2014), S. 1066-1074
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2013.12.006
2013
- , , :
Fatigue Behavior of Cemented Carbide Based Forming Tools
18th Plansee Seminar (Reutte)
In: Sigl, L.; Kestler, H.; Wagner, J (Hrsg.): Proc. 18th Plansee Seminar 2013 - , , , :
Application of cemented carbide based forming tools in cold forging
10th Int. Conf. THE "A" Coatings in Manufacturing Engineering (Aachen)
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Hrsg.): Proc. 10th Int. Conf. THE "A" Coatings in Manufacturing Engineering 2013 - , , , , :
Untersuchungen hinsichtlich der Eignung von EN AW 1050 für die Herstellung prismatischer Bauteile mittels Napf-Rückwärts-Fließpressen
In: UTF-Science (2013), S. 1-8 - , , , :
Modelling Aspects in Accumulative Roll Bonding Process by Explicit Finite Element Analysis
In: Key Engineering Materials 549 (2013), S. 452-459
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.452 - , :
Forming Process Parameter Dependent Recrystallization Phenomena in Friction Stir Welded Aluminium Sheets
7th International Conference and Exhibition on Design and Production of Machines and Dies/Mold
In: Akkök, M.; Budak, E.; Firat, M.; Kaftanoglu, B. (Hrsg.): 7th International Conference and Exhibition on Design and Production of Machines and Dies/Mold 2013 - , , :
Mechanical Weld Zone Characterization for the Numerical Simulation of Forming Friction Stir Welded Aluminum Blanks
In: AIP Conference Proceedings 1567 (2013), S. 684-687
ISSN: 0094-243X - , , , :
Praxisnahe Versagensbeschreibung in der Blechumformung - Vergleich zwischen dem mikromechanischen Schädigungsmodell nach Gurson-Tveergard-Needleman und dem Grenzformänderungsschaubild
33. EFB-Kolloquium Blechverarbeitung (Fellbach, 16. April 2013 - 17. April 2013)
In: EFB, Hannover (Hrsg.): Umformen, Schneiden, Verbinden im Leichtbau - Machbarkeit - Produktivität - Qualität - Tagungsband T36 des 33. EFB-Kolloquiums Blechverarbeitung am 16. und 17. April 2013 in Fellbach 2013 - , :
Basic experimental and numerical investigations on chip pressing
In: Key Engineering Materials 554-557 (2013), S. 630-637
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.630 - , , :
Numerical simulation to improve robustness in sheet metal forming process chains
In: AIP Conference Proceedings 1532 (2013), S. 683-688
ISSN: 0094-243X
DOI: 10.1063/1.4806895 - , , :
Influence of the Cutting Edge Geometry on the Tool Stress Distribution in Monocrystalline Silicon Punches for Microblanking of Thin Metal Foils
10th Int. Conf. Multi-Material Micro Manufacture
In: Azcárate, S.; Dimov, S. (Hrsg.): Proc. 10th Int. Conf. Multi-Material Micro Manufacture 2013 - , , :
Process and Damage Behaviour of High Strength Steels in Shearing Operations
XXXII. Verformungskundliches Kolloquium (Leoben)
In: Buchmayr, B. (Hrsg.): Tagungsband XXXII. Verformungskundliches Kolloquium 2013 - , , , , , :
Modelling kinetics of phase transformation for the indirect hot stamping process
In: Key Engineering Materials 549 (2013), S. 108-116
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.108 - , , , , :
Time dependent FLC determination - Comparison of different algorithms to detect the onset of unstable necking before fracture
In: Key Engineering Materials 549 (2013), S. 397-404
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.397 - , :
Bendability of advanced high strength steels - A new evaluation procedure
In: CIRP ANNALS - Manufacturing Technology 2013
DOI: 10.1016/j.cirp.2013.03.049 - , :
Cold forging of closely-tolerated functional components out of blanks – possibilities of the new process class sheet-bulk metal forming
6th JSTP Int. Seminar Precision Forging (Kyoto)
In: Ishikawa, T. (Hrsg.): Proc. 6th JSTP Int. Seminar Precision Forging 2013 - , , , , , :
Einfluss der Auswertestrategie auf die Grenzformänderungskurve
In: MP Materials Testing 55 (2013), S. 668-672
ISSN: 0025-5300 - Michael Lechner, Wolfgang Böhm, Hung Nguyen, Marion Merklein:
Fertigungsmethoden
In: Konstruktion 65 (2013), S. IW11-IW17
ISSN: 0720-5953 - , , , :
Herstellung maßgeschneiderter Aluminiumwerkstoffe
In: Konstruktion 11/12 (2013), S. 11-13
ISSN: 0720-5953 - , , , :
Optimization of the heat treatment layout and blank outline of THTB
In: Key Engineering Materials 554-557 (2013), S. 2465-2471
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.2465 - , , :
Comprehensive material characterization for an intermediate heat treatment
In: Key Engineering Materials 549 (2013), S. 39-44
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.39 - , :
Development of a Biaxial Tensile Machine for Characterization of Sheet Metals
In: Journal of Materials Processing Technology 213 (2013), S. 939-946
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2012.12.005 - , , , :
Fügen durch Umformen - Das Spannungsfeld zwischen Umform- und Fügetechnik
18. Paderborner Symposium Fügetechnik (Paderborn)
In: Freundeskreis LWF Universität Paderborn e.V. (Hrsg.): Effiziente Fertigung von Hochleistungsverbundsystemen - Proc. 18. Paderborner Symposium Fügetechnik 2013 - , , , :
Analysis of the deformation behavior of Ti-6Al-4V at elevated temperatures
In: Key Engineering Materials 554-557 (2013), S. 29-32
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.29 - , , , :
Mechanical response of Ti-6Al-4V alloy on deformation at moderate temperatures
In: Key Engineering Materials 549 (2013), S. 311-316
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.311 - , , , :
Simulationsgestützte Auslegung maßgeschneiderter wärmebehandelter Aluminiumhalbzeuge
16. Workshop Simulation in der Umformtechnik
In: Tekkaya A. E.; Liewald M. (Hrsg.): 16. Workshop Simulation in der Umformtechnik 2013 - , , :
Blechmassivumformung - Stand der Technik und Ausblick
2. Workshop Blechmassivumformung
In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Hrsg.): 2. Workshop Blechmassivumformung 2013 - , , :
Sheet-Bulk Metal Forming Processes - State of the Art and its Perspectives
TTP 2013 - Tools and Technologies for Processing Ultra High Strength Materials
In: Kolleck, R. (Hrsg.): TTP 2013 - Tools and Technologies for Processing Ultra High Strength Materials 2013 - , , , :
Numerical optimisation of a shear specimen geometry according to ASTM
In: Key Engineering Materials 549 (2013), S. 317-324
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.317 - , :
Manufacturing flexibilisation of metal forming components by tailored blanks
Conf. Competitive Manufacturing (Stellenbosch)
In: D. Dimitrov; C. Schutte (Hrsg.): Proc. Conf. Competitive Manufacturing 2013 - , , :
Tailor Quenched Blanks
Danish-German Aerospace Collaboration Kick-Off - , , , :
Grundlegende Untersuchungen zur Verbindung von pressgehärtetem Stahl und Aluminium mittels Schneidclinchen
20. Sächsiche Fachtagung Umformtechnik
In: A. Brosius (Hrsg.): Tagungsband - 20. Sächsiche Fachtagung Umformtechnik 2013 - , :
Evolution of yield loci for aluminum alloy AA6016 and deep drawing steel DC06 under the influence of non-linear strain paths
In: Key Engineering Materials 549 (2013), S. 21-28
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.21 - , :
Werkstoffcharakterisierung mit Blick auf die Vergangenheit, die Gegenwart und die Zukunft
20. Sächsiche Fachtagung Umformtechnik
In: A. Brosius (Hrsg.): Tagungsband - 20. Sächsiche Fachtagung Umformtechnik 2013 - , :
Hot Stamping – Manufacturing functional optimized components
In: Production Engineering 7 (2013), S. 141-151
ISSN: 0944-6524 - , , :
Manufacturing of geared sheet metal components using flexible rolled tailored blanks
In: Key Engineering Materials 554-557 (2013), S. 1459-1470
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.1459 - , , :
Investigation on the influence of manufacturing parameters on the fatigue strength of components
In: Key Engineering Materials 554-557 (2013), S. 280-286
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.280 - , , , , , :
Influence of upscaling accumulative roll bonding on the homogeneity and mechanical properties of AA1050A
In: Journal of Materials Science 48 (2013), S. 8377-8385
ISSN: 0022-2461
DOI: 10.1007/s10853-013-7648-3 - , , :
Druckversuch bei erhöhten Temperaturen
Werkstoffprüfung DGM
In: H.J. Christ (Hrsg.): Tagungsband Werkstoffprüfung DGM 2013 - , , , , :
Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung
2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung
In: Drummer, D. (Hrsg.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2013 - , :
Manufacturing of geared sheet metal components by a single-stage Sheet-bulk metal forming process
Conf. Competitive Manufacturing (Stellenbosch)
In: Dimitrov, D.; Schutte, C. (Hrsg.): Proc. Conf. Competitive Manufacturing 2013 - , , , , , :
Microstructured surfaces in highly loaded EHD-contacts - manufacturing and tribological performance
10th International Conference THE "A" Coatings in Manufacturing Engineering (Aachen, 10. April 2013 - 11. April 2013)
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Hrsg.): Proc. 10th International Conference THE "A" Coatings in Manufacturing Engineering, Aachen: 2013 - , , , , , :
Microstructured surfaces in highly loaded elastohydrodynamic (EHD)-contacts - manufacturing and tribological performance
In: Materialwissenschaft und Werkstofftechnik 44 (2013), S. 723-729
ISSN: 0933-5137
DOI: 10.1002/mawe.201300182 - , , :
Investigation on a Microextrusion Process of Parallel Protrusions from Metal Strip
8th Int. Conf. Micro Manufacturing (Victoria, CA)
In: M. Jun, S. Park (Hrsg.): Proc. 8th Int. Conf. Micro Manufacturing 2013 - , :
Experimentelle Untersuchung des zweiachsigen Spannungszustands im Kreuzzugversuch zur Identifikation von Werkstoffmodellen für die Finite-Elemente Simulation
In: H.-J. Christ (Hrsg.): Tagungsband Werkstoffprüfung 2013 - , :
Hot Stamping - Process Window for the Austenitization of a Dualphase Steel
4th International Conference Hot Sheet Metal Forming of High-Performance Steel (Auerbach)
In: Oldenburg, M.; Prakash, B.; Steinhoff, M. (Hrsg.): 4th International Conference Hot Sheet Metal Forming of High-Performance Steel 2013 - , , :
Numerical investigation of small curvature bendability of high strength low alloyed steel in air and die bending processes
IDDRG 2013 (Zürich)
In: Hora, P. (Hrsg.): Proc. IDDRG 2013 2013 - , , :
Prediction of Damage in Small Curvature Bending Processes of High Strength Steels Using Continuum Damage Mechanics Model in 3D Simulation
In: Production Engineering 7 (2013), S. 239-249
ISSN: 0944-6524
DOI: 10.1007/s11740-012-0441-3 - , , , :
Development of a damage prediction system for bending and cutting of high strength steels
In: Key Engineering Materials 554-557 (2013), S. 2479-2486
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.2479 - , , :
New approaches to determine the bending contour of the 3-roll-push-bending process
7th Int. Conf. on Design and Production of Machines and Dies/Molds (Antalya)
In: Kaftanoglu, B. (Hrsg.): 7th Int. Conf. on Design and Production of Machines and Dies/Molds 2013 - Ulrich Vierzigmann, Thomas Schneider, Johannes Koch, Daniel Gröbel, Marion Merklein, Ulf Engel, Hense R., Biermann D., Krebs P., Kersting P., Henning L., Denkena B., Herper J., Tillmann W.:
Untersuchungen von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch
2. Workshop Blechmassivumformung
In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Hrsg.): 2. Workshop Blechmassivumformung 2013 - , , , , , :
Mikrostrukturierung von Tassenstößeln zur Reibungsreduzierung im Ventiltrieb - Herstellung, Simulation und tribologische Charakterisierung
54. Tribologie-Fachtagung. Reibung, Schmierung und Verschleiß (Göttingen, 30. September 2013 - 2. Oktober 2015)
In: Gesellschaft für Tribologie e.V. (Hrsg.): 54. Tribologie-Fachtagung. Reibung, Schmierung und Verschleiß. Band II 2013 - , , :
Umform- und Rückfederungssimulation von Leichtbauwerkstoffen - Vergleichende Betrachtung von Zug-Druck- und Wechselbiegeversuchen zur Berücksichtigung des Bauschinger-Effekts
33. EFB-Kolloquium Blechverarbeitung
In: EFB (Hrsg.): Tagungsband des 33. EFB-Kolloquiums Blechverarbeitung 2013 - , :
Einfluss thermomechanischer Prozessparameter auf die tribologischen Eigenschaften beim Presshärten
8. Erlanger Workshop Warmblechumformung (Erlangen)
In: M. Merklein (Hrsg.): 8. Erlanger Workshop Warmblechumformung 2013 - , , , :
Production of gears by cold forging
Int. Conf. on Gears, VDI-Berichte 2199.2
In: VDI Wissensforum (Hrsg.): Int. Conf. on Gears, VDI-Berichte 2199.2 2013
2012
- , , :
Influence of Grinding on the Surface Properties of Cemented Carbides
In: Key Engineering Materials 504-506 (2012), S. 1353-1358
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.1353 - , , :
Influence of Combined Hard and Fine Machining on the Surface Properties of Cemented Carbides
In: Tribology in Industry 34 (2012), S. 119-127
ISSN: 0354-8996 - , , :
Werkzeugherstellung in der Kaltmassivumformung - Einfluss der Werkzeugoberfläche auf die tribologischen Bedingungen
In: wt Werkstattstechnik - Online 10 (2012), S. 672-677
ISSN: 1436-4980 - , , , , :
On The Friction Stir Welding of Titanium Alloys: Experimental Measurements and FEM Model Fine Tuning
In: Steel Research International SPL. ISSUE (2012), S. 591-594
ISSN: 1611-3683 - , , , , :
Process Mechanics in Friction Stir Welding of Magnesium Alloys: Experimental and Numerical Analysis
In: Key Engineering Materials 504-506 (2012), S. 735-740
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.735 - , :
Laserunterstützes Rührreibschweißen von Magnesium Tailored Welded Blanks
XXXI. Verformungskundliches Kolloquium (Leoben)
In: Buchmayr, B. (Hrsg.): XXXI. Verformungskundliches Kolloquium 2012 - , , , , :
Modelling, Construction and Manufacture of a Lightweight Robot Arm
8th CIRP (Mailand)
In: Proceedings of the 8th CIRP International Conference on Intelligent Computation in Manufacturing Engineering 2012
DOI: 10.1016/j.procir.2013.09.037 - , , , , , , , :
Formability of ultrafine-grained AA6016 sheets processed by accumulative roll bonding
In: Key Engineering Materials 504-506 (2012), S. 575-580
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.575 - , , , :
Investigation of influencing parameters on the shape of experimentally determined stress limit curves
IDDRG2012 (Mumbai)
In: Tewari, A; Narasimhan, K.; Date, P. (Hrsg.): Proceedings IDDRG2012 2012 - , , , :
Identification of Process-Based Limit Stress States Applying a Stretch-Bending-Test
In: Key Engineering Materials 504-506 (2012), S. 47-52
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.47 - , , , :
Experimental determination of stress limit curves - comparison of applied technological tests and stamped components by fractographic examinations
5th Forming Technology Forum (Zürich)
In: Hora, P. (Hrsg.): Proc. 5th Forming Technology Forum 2012 - , , , , :
Experimental investigations on high-precision microcutting of copper foils with microfabricated silicon punches
In: Shore, P.; Spaan, H.; Burke, T. (Hrsg.): Proc. 12th Int. Conf. European Society for Precision Engineering and Nanotechnology 2012 - , , , :
Tranciatura ad alta precisione di fogli di rame mediante punzoni in silicio monocristallino rivestiti e non
In: Lamiera (2012), S. 44-48
ISSN: 0391-5891 - , , :
Comprehensive approach for process modeling and optimization in cold forging considering interactions between process, tool and press
In: Journal of Materials Processing Technology (2012)
ISSN: 0924-0136 - , , , , , :
Einfluss der Auswertestrategie auf die Grenzformänderungskurve
Werkstoffprüfung 2012
In: Borsutzki, M.; Moninger, G. (Hrsg.): Tagungsband Werkstoffprüfung 2012 2012 - , , , , , , , , :
Analysis of microbending of CuZn37 brass foils based on strain gradient hardening models
In: Journal of Materials Processing Technology 212 (2012), S. 653-661
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2011.10.007 - , , , , , , , :
Tailored heat treated accumulative roll bonded aluminum blanks: Microstructure and mechanical behavior
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012), S. 3097-3107
ISSN: 1073-5623
DOI: 10.1007/s11661-012-1151-3 - , , , , , , , , :
Bulk forming of sheet metal
In: CIRP Annals - Manufacturing Technology 61 (2012), S. 725-745
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2012.05.007 - , , :
Tailoring Material Properties of Aluminum by Local Laser Heat Treatment
In: Physics Procedia 39 (2012), S. 232-239
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2012.10.034 - , , , :
FE-basierte Prozess- und Werkzeugauslegung zur Herstellung von Hochleistungsbauteilen mit dem Ziel einer gezielten Einstellung von Bauteileigenschaften
13. RoundTable - Simulation in der Umformtechnik (Bamberg)
In: Schafstall, H.; Wohlmuth, M.; simufact engineering GmbH (Hrsg.): Tagungsband 13. RoundTable - Simulation in der Umformtechnik 2012 - , , :
Enhancing Process Limits of Blank Hydroforming
Internationale Konferenz „Hydroumformung von Blechen, Rohren und Profilen“ (Frankfurt am Main)
In: Institut für Umformtechnik (IFU) Universität Stuttgart (Hrsg.): Internationale Konferenz „Hydroumformung von Blechen, Rohren und Profilen“ 2012 - , :
Flexibilisierung der Fertigung umformtechnisch erzeugter Bauteile durch prozessangepasste Halbzeuge
11. Umformtechnisches Kolloquium Darmstadt (Bamberg)
In: P. Groche (Hrsg.): 11. Umformtechnisches Kolloquium Darmstadt 2012 - , :
Tailored solutions in mechanical engineering
In: Public Service Review (2012), S. 35-37
ISSN: 2046-5688 - , , :
Enhancement of formability of aluminum alloys in multi-stage forming operations by a local intermediate heat treatment
In: Production Engineering 6 (2012), S. 541-549
ISSN: 0944-6524
DOI: 10.1007/s11740-012-0407-5 - , , :
Trends in der Aluminiumumformung
Cluster-Forum Innovationen in der Aluminium-Umformtechnik
In: Tagungsband zum Cluster-Forum Innovationen in der Aluminium-Umformtechnik 2012 - , , , :
Tailored Heat Treated Profiles - Enhancement of the Forming Limit of Aluminum Profiles under Bending Load
In: Key Engineering Materials 504-506 (2012), S. 375-380
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.375 - , , , :
Überblick der Blechmassivumformung
In: Umformtechnik 1 (2012), S. 42-43
ISSN: 0300-3167 - , , :
Orbital forming of tailored blanks from sheet metal
In: CIRP Annals - Manufacturing Technology 61 (2012), S. 263-266
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2012.03.130 - , , , , :
Manufacturing of sheet metal components with variants using process adapted semi-finished products
In: Key Engineering Materials 504-506 (2012), S. 1023-1028
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.1023 - , , :
Wear behavior of PVD-Coatings
In: Tribology in Industry 34 (2012), S. 51-56
ISSN: 0354-8996 - , , :
Experimental Study of a Full Forward Extrusion Process from Metal Strip
In: Key Engineering Materials 504-506 (2012), S. 587-592
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.587 - , , , :
Über die Blechprüfung von heute
Werkstoffprüfung (Düsseldorf)
In: M. Borsutzki, G. Moninger (Hrsg.): Tagungsband Werkstoffprüfung 2012 - , :
Prozessfenster zur Verarbeitung alternativer Stahlgüten im Presshärtprozess
7. Erlanger Workshop Warmblechumformung (Bamberg)
In: M. Merklein (Hrsg.): 7. Erlanger Workshop Warmblechumformung 2012 - , , :
Fertigung innovativer Bauteile aus hochfesten Stählen: Biegen und Schneiden – Risse vermeiden
In: Zukunftstechnologien in Bayern - Neue Materialien, Verfahren und Produkte, 2012, S. 28-31 - , , , :
Einfluss der Fließkurve auf den Rohrbiegeradius
In: wt Werkstattstechnik - Online 10 (2012), S. 689-695
ISSN: 1436-4980 - , :
Improved Formability of Aluminum Alloys using Laser Induced Hardening of Tailored Heat Treated Blanks
In: Physics Procedia 39 (2012), S. 318-326
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2012.10.044 - , :
Manufacturing of complex high strength components out of high nitrogen steels at industrial level
In: Transactions of Nonferrous Metals Society of China 2012 (2012), S. 512-513
ISSN: 1003-6326
DOI: 10.1016/S1003-6326(12)61754-3 - , , , , , , :
Hochleistungsbauteile durch Kaltmassivumformung hochfester, druckaufgestickter Stähle
In: UTF-Science (2012) - , , , , , , , :
Thermo-mechanical sheet metal forming of aero engine components in Ti-6Al-4V–PART 1: Material characterisation
In: International Journal of Material Forming (2012)
ISSN: 1960-6206 - , , , , :
Prototype Manufacturing of Helical Needles for Suture in Deep Wound Cavities
1st Int.Conf. Design and Processes for medical devices PROMED (Rivolti (TO))
In: E. Ceretti, A. Fiorentino, L. Giorleo, C. Giardini (Hrsg.): Proc. 1st Int.Conf. Design and Processes for medical devices PROMED 2012 - , , :
Analytical and numerical approaches to predict the flow characteristics of a magnetorheological fluid in rotational symmetric cross sections
In: Key Engineering Materials 504-506 (2012), S. 399-404
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.399 - , , , :
Pressschweißen von Aluminium-Stahl-Mischverbindungen
In: Lightweight Design (2012), S. 14-19
ISSN: 1865-4819 - , , , :
Mehrlagenbeschichtungen für den beanspruchungsgerechten Einsatz bei Kaltmassivumformwerkzeugen
Moderne Beschichtungen zum Verschleißschutz von Werkzeugen (Sulzbach-Rosenberg)
In: Faulstich, M.; Geiger, M.; Kukla, H.; Wolf, G. (Hrsg.): Moderne Beschichtungen zum Verschleißschutz von Werkzeugen 2012 - , , :
Influences on wear load in cup extrusion processes
7th ICFG Workshop on Process Simulation in Metalforming (Gifu, Japan)
In: Yoshida, Y. (Hrsg.): 7th ICFG Workshop on Process Simulation in Metalforming 2012 - , , :
Experimental and Numerical Investigation on a Full Forward Extrusion Process from Metal Strip
9th Int. Conf. Multi-Material Micro Manufacture (Singapore)
In: Humbert Noll, Nadja Adamovic and Stefan Dimov (Hrsg.): Proc. 9th Int. Conf. Multi-Material Micro Manufacture 2012 - , :
Tailored tempering – FE-Simulation of manufacturing components with local adjusted mechanical properties
In: Steel Research International (2012), S. 283-286
ISSN: 1611-3683 - , , :
Methodology for the analysis of the process behaviour of advanced high strength steels in bending and shearing operations
In: Key Engineering Materials 504-506 (2012), S. 895-900
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.895 - , , , :
Material Flow in Sheet-Bulk Metal Forming
In: Key Engineering Materials 504-506 (2012), S. 1035-1040
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.504-506.1035 - Weckenmann A., Reithmeier E., Marion Merklein, Behrens B.-A., Wartzack S., Kästner M., Akkasoglu G., Ohrt C., Thomas Schneider, Salfeld V., Breitsprecher T., Plugge B.:
Methodengestützte Referenzvorgehensweise für neue Umformverfahren
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 01-02 (2012), S. 43-47
ISSN: 0932-0482 - , , , :
Inverse Parameteridentifikation mittels Wechselbiegeversuch zur Ermittlung der nicht isotropen Verfestigung von Blechwerkstoffen
LS-DYNA Forum 2012
In: LS-DYNA Forum 2012 2012 - , :
Wear Behavior of Uncoated and Coated Tools under Complex Loading Conditions
In: Tribology in Industry 34 (2012), S. 11-17
ISSN: 0354-8996 - , , :
Werkzeug- und Halbzeugbeschichtungen für das direkte Presshärten
Moderne Beschichtungen zum Verschleißschutz von Werkzeugen (Sulzbach-Rosenberg)
In: Faulstich, M.; Geiger, M.; Kukla, H.; Wolf, G. (Hrsg.): Moderne Beschichtungen zum Verschleißschutz von Werkzeugen 2012
2011
- , , , , , , , , , :
Umformwerkzeuge in der Blechmassivumformung
1. Workshop Blechmassivumformung (Bamberg)
In: Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E. (Hrsg.): 1. Workshop Blechmassivumformung 2011 - , :
Consideration of elastic tool deformation in numerical simulation of hydrofroming with granular material used as a medium
In: Key Engineering Materials 473 (2011), S. 707-714
ISSN: 1013-9826 - , :
Influences on the Molding in Hydroforming Using Granular Material as a Medium
In: Chung, K.; Han, H. N.; Huh, H. Barlat, F.; Lee, M.-G. (Hrsg.): AIP Conference Proceedings Volume 1383 - The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011) 2011
DOI: 10.1063/1.3623668 - , , , , :
Improved Sheet Bulk Metal Forming Processes by Local Adjustment of Tribological Properties
In: Journal of Manufacturing Science and Engineering 133 (2011), Art.Nr.: 061011
ISSN: 1087-1357
DOI: 10.1115/1.4005313 - , , , , , :
Characterisation of the transition area at partial hot stamped car body components by the 3-point bending test
SCT2011 (Düsseldorf)
In: Wieland, H. (Hrsg.): Proceedings SCT2011 2011 - , , , , :
High-precision blanking of thin copper foils using uncoated and coated monocrystalline silicon punches
8th Int. Conf. Multi-Material Micro Manufacture
In: Kück, H.; Reinecke, H.; Dimov, S. (Hrsg.): Proc. 8th Int. Conf. Multi-Material Micro Manufacture 2011 - , , :
Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils
In: AIP Conference Proceedings 1353 (2011), S. 481-486
ISSN: 0094-243X
DOI: 10.1063/1.3589561 - , , , , , :
Mechanical Properties of Laser Heat Treated 6 mm Thick UHSS-Steel
In: Menary, G. (Hrsg.): The 14th International ESAFORM Conference on Material Forming 2011
DOI: 10.1063/1.3589699 - , , :
Innovative Sitzbauteile durch Umformen von Mehrphasenstählen
In: Maschinenmarkt 18 (2011), S. 22-25
ISSN: 0341-5775 - , , , :
Characterization of damage and fracture of high strength steels within air bending
6th Int. Conf. and Exhibition on Design and Production of Machines and Dies/Molds (Ankara)
In: Akkök, M.; Budak, E.; Firat, M.; Kaftanoglu, B. (Hrsg.): Proc. 6th Int. Conf. and Exhibition on Design and Production of Machines and Dies/Molds 2011 - , , :
Modeling Laser Heating for Roller Hemming Applications
In: Key Engineering Materials 473 (2011), S. 501-508
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.501 - , , , , , :
Methods for Determination of Residual Stress of a Formed Plate using Laser Ablation, Wire EDM and Milling
In: Key Engineering Materials 473 (2011), S. 368-375
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.368 - , , , , , , , :
Size effects of CuZn37 brass foil in microforming
In: Cailiao Kexue yu Gongyi/Material Science and Technology 19 (2011), S. 15-19
ISSN: 1005-0299 - , , , , , , , :
Determination of material intrinsic length and strain gradient hardening in microbending process
In: International Journal of Solids and Structures 48 (2011), S. 163-174
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2010.09.016 - , , :
Influence of machining process on residual stresses in the surface of cemented carbides
In: Procedia Engineering 19 (2011), S. 252-257
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.11.108 - , , , , , , , :
Integrierte Fertigung von tiefgezogenen Blechbauteilen mit Verzahnungselementen unter Einsatz von prozessangepassten Halbzeugen
1. Erlanger Workshop Blechmassivumformung 2011 (Bamberg)
In: Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E. (Hrsg.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011 2011 - , :
Forward and Reverse Simple Shear Test Experiments for Material Modeling in Forming Simulations
In: Tekkaya, E.A. (Hrsg.): Proc. of the 10th International Conference on Technology of Plasticity (ICTP) 2011 - , , , :
Flow Behaviour of Advanced Aluminium Materials
In: Hirt, G.; Tekkaya, E.A. (Hrsg.): Steel research international: Special Edition: 10th International Conference on Technology of Plasticity 2011 - , :
Adjusting Optimized Material Properties for Tailored Heat Treated Blanks
In: Key Engineering Materials 473 (2011), S. 420-427
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.420 - , , , :
Fundamental investigations on the material flow at combined sheet and bulk metal forming processes
In: CIRP Annals - Manufacturing Technology 60 (2011), S. 283-286
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2011.03.146 - , , :
Investigation of the Influence of Tool Geometry on Effective Strain Distribution in Full Forward Extrusion
In: AIP Conference Proceedings 1353 (2011), S. 419-424
ISSN: 0094-243X
DOI: 10.1063/1.3589551 - , :
Functional Integration of Sheet Metal Parts by Deep Drawing
In: Steel Research International None (2011), S. 1036-1041
ISSN: 1611-3683 - , , :
Simulation of a Full Forward Extrusion Process from Metal Strip
In: AIP Conference Proceedings 1353 (2011), S. 493-498
ISSN: 0094-243X
DOI: 10.1063/1.3589563 - , , , :
Investigations on Parameters Influencing Thermal and Frictional Properties within Hot Stamping
In: Journal of Heat Treatment and Materials 66 (2011), S. 335-341
ISSN: 1867-2493 - , , , , :
Overview on sheet-bulk metal forming processes
In: G. Hirt, A.E. Tekkaya (Hrsg.): Proceedings ICTP 2011 2011 - , , , , , , :
Machines and Tools for Sheet-Bulk Metal Forming
In: Key Engineering Materials 2011
DOI: 10.4028/www.scientific.net/KEM.473.91 - , , :
Tool design for cold forging of high nitrogen steels
12th International Cold Forging Congress (Stuttgart)
In: Liewald, M. (Hrsg.): Proceedings of the 12th International Cold Forging Congress 2011 - , , :
On the evaluation of strength of cold forged components made of high nitrogen steel
3rd International Conference on Steels in Cars and Trucks (Düsseldorf)
In: Proceedings of the 3rd International Conference on Steels in Cars and Trucks 2011 - , , , , , :
Tool development based on modelling and simulation of hot sheet metal forming of Ti-6Al-4V titanium alloy
In: Journal of Materials Processing Technology 211 (2011), S. 1324-1335
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2011.03.001 - , :
Enhancing Forming Limits by Using a Magnetorheological Fluid as Active Fluid Medium for Hydroforming
In: Gerhard Hirt, A. Erman Tekkaya (Hrsg.): Steel research international: Special Edition: 10th International Conference on Technology of Plasticity 2011 - , :
Flow behaviour of magnetorheological fluids, considering the challenge of sealing in blank hydroforming in the flange area with rectangular leakage area cross-sections
In: Key Engineering Materials 473 (2011), S. 121-129
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.121 - , :
Sheet-Bulk Metal Forming of Preformed Sheet Metal Parts
In: Key Engineering Materials 473 (2011), S. 83-90
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.83 - , , :
Application based PVD-coatings for cold forging tools
6th Int. Conf. and Exhibition on Design and Production of Machines and Dies / Molds (Ankara)
In: Akkök, M.; Budak, E.; Firat, M.; Kaftanoglu, B. (Hrsg.): Proc. 6th Int. Conf. and Exhibition on Design and Production of Machines and Dies / Molds 2011 - , , , , :
Intermediate Heat Treatment - A New Proceeding for Aluminium Alloys Using Forming Limit Diagrams
In: Key Engineering 473 2011
DOI: 10.4028/www.scientific.net/KEM.473.428 - , :
Variation of deep drawing steel grades’ properties in dependency of the stress state and its impact on FEA
In: International Journal of Material Forming (2011)
ISSN: 1960-6206 - , :
Investigations on the Flow Behavior of Boron-Manganese Steels at elevated strain rates
3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel (Auerbach)
In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Hrsg.): Proceedings 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel 2011 - , , :
FE-Simulation of the heat transfer by defined cooling conditions during the hot stamping process
In: Key Engineering Materials 473 (2011), S. 699-706
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.699 - , :
Finite-Element basierte Auslegung funktionsoptimierter Bauteile im Tailored Tempering Prozess
6. Erlanger Workshop Warmblechumformung
In: Merklein, M. (Hrsg.): 6. Erlanger Workshop Warmblechumformung 2011 - , :
Numerische Abbildung des Tailored Tempering Prozess: Wärmeübergang, FE-Simulation und Ableitung des resultierenden Gefüges
14. Workshop - Simulation in der Umformtechnik
In: Tekkaya, A. E.; Liewald, M. (Hrsg.): 14. Workshop - Simulation in der Umformtechnik 2011 - , , :
Application of the Finite element methods on the staking process of staking fasteners
In: Key Engineering Materials 473 (2011), S. 273-280
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.273 - , , :
Friction Conditions in Sheet-Bulk Metal Forming
Procedia Engineering
In: Procedia Engineering 2011 - , , :
Tribological Conditions in Sheet-Bulk Metal Forming
2nd International Conference of Engineering Against Fracture
In: 2nd International Conference of Engineering Against Fracture 2011 - , , :
Numerical simulation of the staking process of clinching fasteners
SCT2011 (Düsseldorf)
In: Wieland, H. (Hrsg.): Proceedings SCT2011 2011 - , :
Dickblechumformen und Formhärten - Potentiale und Grenzen bei der Herstellung hochbelasteter Funktionsbauteile
6. Erlanger Workshop Warmblechumformung (Bamberg)
In: M. Merklein (Hrsg.): 6. Erlanger Workshop Warmblechumformung 2011 - , :
Wear Behavior of Uncoated and Coated Tools Used for Direct Hot Stamping
2nd International Conference of Engineering Against Fracture
In: 2nd International Conference of Engineering Against Fracture 2011 - , :
Wear Behavior of Uncoated and Coated Tools With Respect to Different Loading Conditions
3rd Int. Conf. Hot Sheet Metal Forming of High-Performance Steel (Auerbach)
In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Hrsg.): Proc. 3rd Int. Conf. Hot Sheet Metal Forming of High-Performance Steel 2011 - , , :
Improved Roller Hemming System for High Volume Part Production
In: Key Engineering Materials 473 (2011), S. 168-175
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.473.168
2010
- , , , , , , , , :
Environmentally benign tribo-systems for metal forming
In: CIRP ANNALS - Manufacturing Technology 2010
DOI: 10.1016/j.cirp.2010.05.007 - , , , , , :
Interlaboratory Comparison of Friction Conditions in Hot Stamping Operations
In: Key Engineering Materials 438 (2010), S. 97-105
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.438.97 - , , , , :
Interlaboratory comparison for heat transfer coefficient identification in hot stamping of high strength steels
In: UNIVERSITY OF BRESCIA (Hrsg.): Proceedings of Esaform 2010 2010
DOI: 10.1007/s12289-010-0895-9 - , , , , , , :
Inverse Identification of Kinematic Hardening Parameters with Bending Tests
50th Conference of IDDRG 2010 (Graz)
In: Kolleck, R. (Hrsg.): Proc. 50th Conference of IDDRG 2010 2010 - , :
Comparison of numerical simulation and measurement of shear test and uniaxial compression test to verify material model for granular material used as medium for hydroforming
5th International Conference on Advances in Production Engineering (Radom)
In: Warsaw University of Technology, Faculty of Production Engineering 2010 (Hrsg.): Proc. 5th International Conference on Advances in Production Engineering 2010 - , :
Numerical Simulation of Hydroforming at Elevated Temperatures with Granular Material Used as Medium Compared to the Real Part Geometry
In: International Journal of Material Forming 3 (2010), S. 279-282
ISSN: 1960-6206 - , , , :
Numerical Model of Tube Freeform Bending by Three-Roll-Push-Bending
2nd International Conference on Engineering Optimization (Lissabon)
In: Associacao Portuguesa de Mecanica Teória, Aplicada e Computacional (Hrsg.): 2nd International Conference on Engineering Optimization 2010 - , :
Identifikation von Modellparametern zur Bestimmung des Fließ- und Verfestigungsverhaltens unter Berücksichtigung einer Belastungsumkehr
30. EFB-Kolloquium Blechverarbeitung (Bad Boll, 2. März 2010 - 3. März 2010)
In: EFB, Hannover (Hrsg.): Bauteile der Zukunft - Methoden und Prozesse - Tagungsband T31 des 30. EFB-Kolloquiums Blechverarbeitung am 2. und 3. März 2010 in Bad Boll 2010 - , , :
Modeling of the Behavior of a Cold Forging Process Considering the Deflection of Tooling System and Press
2nd Int. Conf. on Process Machine Interactions (PMI)
In: Proc. 2nd Int. Conf. on Process Machine Interactions (PMI) 2010 - , , :
Process Modeling In Cold Forging Considering The Process-Tool-Machine Interactions
In: Barlat, F.; Moon, Y. H.; Lee, M.-G. (Hrsg.): Proc. of the 10th Int. Conf. on Numerical Methods in Industrial Forming Processes; AIP Conference Proceedings 1252 2010
DOI: 10.1063/1.3457568 - , , :
Simulation-Based Determination of Deflection Characteristic of Tooling System and its Modeling in FE Simulation of Cold Forging Process
In: Steel Research International (2010), S. 318-321
ISSN: 1611-3683 - , :
Enhanced Investigation of Flow and Necking Behavior of Sheet Metal within Layer Compression and Tensile Tests
COMA 10 (Stellenbosch)
In: DIMITROV, D. (Hrsg.): Proc. of COMA 10 2010 - , , :
Experimental and Analytic Determination of Forming Limit Curves Applied to a Bainitic Steel
MATFEM Conference 2010
In: Gese, H. (Hrsg.): Proc. of MATFEM Conference 2010 2010 - , , , , , :
Thermo-Mechanical Properties of Tailor Welded Blanks in Hot Sheet Metal Forming Processes
50th Conference of IDDRG 2010 (Graz)
In: Kolleck, R. (Hrsg.): Proc. 50th Conference of IDDRG 2010 2010 - , , , :
Basic Investigations on Hot Stamping of Tailor Welded Blanks Regarding the Manufacturing of Lightweight Components with Functionally Optimized Mechanical Properties
In: Transactions of the North American Manufacturing Research Institute of SME 38 (2010), S. 593-600
ISSN: 1047-3025 - Li, H. Z., Dong, X. H., Shen, Y., Alexander Diehl, Hinnerk Hagenah, Ulf Engel, Marion Merklein:
Size effects on springback behaviors due to plastic strain gradient hardening in microbending process of pure aluminum foils
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 257 (2010), S. 4497-4504
ISSN: 0921-5093
DOI: 10.1016/j.msea.2010.03.105 - , , , :
Modellierung des Verfestigungsverhaltens von Blechwerkstoffen
13. Workshop - Simulation in der Umformtechnik (, 19. März 2010 - 19. März 2010)
In: Liewald, M.; Tekkaya, A. E. (Hrsg.): 13. Workshop - Simulation in der Umformtechnik (19.03.2010) 2010 - , , , , :
Kennwertermittlung für Streck-Biege-Beanspruchungen
Tagung Werkstoffprüfung (Düsseldorf)
In: M. Pohl (Hrsg.): Proceedings Tagung Werkstoffprüfung 2010 - , , , , :
Manufacturing of Complex Functional Components with Variants by Using a new Metal Forming Process – Sheet-Bulk Metal Forming
In: International Journal of Material Forming 3 (2010), S. 347-350
ISSN: 1960-6206 - , , :
Time dependent determination of forming limit diagrams
In: CIRP Annals - Manufacturing Technology 59-1 (2010), S. 295-298
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2010.03.001 - , , , :
New Time Dependent Method for Determination of Forming Limit Curves Applied to SZBS800
50th Conference of IDDRG 2010 (Graz)
In: Kolleck, R. (Hrsg.): Proc. 50th Conference of IDDRG 2010 2010 - , , , :
Herstellung von funktionsoptimierten Bauteilen im Presshärtprozess
In: Stahl und Eisen (2010), S. 51-57
ISSN: 0340-4803 - , , :
Fließkurvenermittlung für die Kaltmassivumformung druckaufgestickter Stähle
Tagung Werkstoffprüfung (Düsseldorf)
In: Pohl, M. (Hrsg.): Proceedings Tagung Werkstoffprüfung 2010 - , :
Investigation of Tailored Blank Production by the Process Class Sheet-Bulk Metal Forming
In: Francisco Chinesta, Yvan Chastel, Mohamed El Mansori (Hrsg.): International Conference on Advances in Materials and Processing Technologies (AMPT2010) 2010
DOI: 10.1063/1.3552475 - , , :
Herstellung funktionaler Blechkomponenten
In: wt Werkstattstechnik - Online 11/12 (2010), S. 910-915
ISSN: 1436-4980 - , , :
Effiziente Bewertung von Blechumformprozessen durch die Reduzierung kritischer Einflussgrößen in der stochastischen Simulation
30. EFB-Kolloquium Blechverarbeitung am 2. und 3. März 2010 in Bad Boll (Bad Boll)
In: EFB, Hannover (Hrsg.): Bauteile der Zukunft - Methoden und Prozesse - Tagungsband T31 des 30. EFB-Kolloquiums Blechverarbeitung am 2. und 3. März 2010 in Bad Boll 2010 - , :
Transformation kinetics of the hot stamping steel 22MnB5 in dependency of the applied deformation on the austenitic microstructure
50th Conference of IDDRG 2010 (Graz)
In: Kolleck, R. (Hrsg.): Proc. 50th Conference of IDDRG 2010 2010 - , , , :
Maßgeschneidert – Funktionsoptimierte Strukturbauteile im Presshärtprozess
In: Lightweight Design 5 (2010), S. 52-57
ISSN: 1865-4819 - , :
Impact of Coating Systems on the Tribological and Wear Behavior of Hot Stamping Tools
4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP) (Paris)
In: Felder, E.; Montmitonnet, P. (Hrsg.): Proc. 4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP) 2010 - , , , , :
Analytic Methods for the Calculation of the Heat Transfer Coefficient
In: International Review of Mechanical Engineering 4 (2010), S. 208-215
ISSN: 1970-8734 - , :
Advanced laser heat treatment with respect to the application for Tailored Heat Treated Blanks
In: Physics Procedia 5 (2010), S. 233-242
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2010.08.049 - , , :
Vergleich verschiedener Verfahren zur Fließkurvenaufnahme im Hinblick auf die Prozess- und Werkzeugauslegung bei der Kaltmassivumformung druckaufgestickter Stähle
AutoMetFORM / SFU 2010 (Freiberg)
In: R. Kawalla (Hrsg.): Proceedings AutoMetFORM / SFU 2010 2010 - , :
Characterization of a magnetorheological fluid and simulative design of a magnetic field with respect to its suitability for hydroforming
5th International Conference on ADVANCES IN PRODUCTION ENGINEERING (Radom)
In: Warsaw University of Technology, Faculty of Production Engineering (Hrsg.): Proceedings of the 5th International Conference on ADVANCES IN PRODUCTION ENGINEERING 2010 - , :
Characterization of a Magnetorheological Fluid with Respect to its Suitability for Hydroforming
In: International Journal of Material Forming 3 (2010), S. 283-286
ISSN: 1960-6206
DOI: 10.1007/s12289-010-0762-8 - , , :
Tribological characterization of PVD-coatings
In: Key Engineering Materials 438 (2010), S. 179-186
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.438.179 - , , :
Qualification of a new test for wear investigation on coated tools
4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP) (Paris)
In: Felder, E.; Montmitonnet, P. (Hrsg.): Proc. 4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP) 2010 - , , :
Material Modelling for Stochastic Simulation
50th Conference of IDDRG 2010 (Graz)
In: Kolleck, R. (Hrsg.): Proc. 50th Conference of IDDRG 2010 2010 - , , :
Influence of the Variation of Material Properties on the Risk of Failure in Dependency of the Materials Flow Condition during Forming Processes
In: International Journal of Material Forming 3 (2010), S. 101-104
ISSN: 1960-6206
DOI: 10.1007/s12289-010-0717-0 - , :
Beschreibung des mechanischen Werkstoffverhaltens beim Warmumformen höchstfester Stähle
5. Erlanger Workshop Warmblechumformung (Bamberg)
In: Merklein, M. (Hrsg.): Tagungsband 5. Erlanger Workshop Warmblechumformung 2010 - , :
Auswirkungen spezifischer Abkühlbedingungen auf den Wärmeübergang bei Presshärtprozessen
5. Erlanger Workshop Warmblechumformung (Bamberg)
In: Merklein, M. (Hrsg.): 5. Erlanger Workshop Warmblechumformung 2010 - , , :
Tailored Surfaces in Sheet-Bulk Metal Forming
4th International Conference on Tribology in Manufacturing Processes (ICTMP) (Paris)
In: Felder, E.; Montmitonnet, P. (Hrsg.): Proc. 4th International Conference on Tribology in Manufacturing Processes (ICTMP) 2010 - , :
Characterization of Heat Transfer Coefficients of Tool Materials and Tool Coatings for Hot Stamping of Boron-Manganese Steels
In: Key Engineering Materials 438 (2010), S. 81-88
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.438.81 - , :
Verschleißeigenschaften unbeschichteter und beschichteter Werkzeuge in Abhängigkeit unterschiedlicher Werkzeugbeanspruchungen
5. Erlanger Workshop Warmblechumformung (Bamberg)
In: Merklein, M. (Hrsg.): 5. Erlanger Workshop Warmblechumformung 2010
2009
- , , , , , , :
Innovatives Konstruktions- und Fertigungskonzept für Straßenbahn-Rohbau
8. Fachtagung Fügen und Konstruieren im Schnienfahrzeugbau
In: SLV (Hrsg.): 8. Fachtagung Fügen und Konstruieren im Schnienfahrzeugbau 2009 - , , , :
An innovative approach for the process design for three-roll bending of plain tubular components
In: Angeles Gutierrez, M.; Sedlmaier, A.; Galdós, L. (Hrsg.): Proc. 1st Int. Congress on Roll Forming 2009 - , , , , , , :
Inverse Parameteridentifikation mittels Biegeversuchen
In: DGM (Hrsg.): Tagungsband Werkstoffprüfung 2009 2009 - , , :
Aluminium Tailored Heat Treated Blanks
In: Annals of the German Academic Society for Production Engineering WGP 2009 - , , :
Aluminum tailored heat treated blanks
In: Production Engineering 3 (2009), S. 401-410
ISSN: 0944-6524
DOI: 10.1007/s11740-009-0179-8 - , , , :
Einfluß unterschiedlicher Wärmebehandlungsrouten auf die Robustheit und Höhe der mechanischen Eigenschaften des Stahls 22MnB5
4. Erlanger Workshop Warmblechumformung (Bamberg)
In: Merklein, M.; Lechler, J. (Hrsg.): Tagungsband 4. Erlanger Workshop Warmblechumformung 2009 - , :
Mechanical Behaviour of Ceramic Beads Used as Medium for Hydroforming at Elevated Temperatures
In: Key Engineering Materials 410-411 (2009), S. 61-68
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.410-411.61 - , , , , :
Investigation on heating strategies for hot stamping of boron alloyed steels
In: CIRP Annals - Manufacturing Technology 2009 - , , :
Charakterisierung des Formänderungsvermögens von hoch- und höchstfesten Karosseriestählen mit dem 3-Punkt Biegeversuch - Einfluss der Probenpräparation
Werkstoffprüfung 2009 (Düsseldorf)
In: Borsutzki, M.; Geisler, S. (Hrsg.): Tagungsband Werkstoffprüfung 2009 2009 - , , , , , , :
Influence of the plasticity strain gradient on springback in micro-bending process of metal foils
In: Chinese Society of Mechanical Engineering (Hrsg.): Proceedings of The 2nd Asia Conference on micro/nano sized technology (AWMFT-2009) 2009 - :
Manufacturing of complex functional components with variants by using a new sheet metal forming process
42nd Plenary Meeting of the International Cold Forging Group (Shanghai)
In: Ruan, X.Y. (Hrsg.): ICFG 2009, Proceedings of the 42nd Plenary Meeting of the International Cold Forging Group 2009 - , :
A Contribution to the Optimisation of a Simple Shear Test
In: Key Engineering Materials 410-411 (2009), S. 467-472
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.410-411.467 - , , :
Novel setup for the investigation of tribological behavior of sheet metal surfaces
In: International Journal of Material Forming 2 (2009), S. 233-236
ISSN: 1960-6206
DOI: 10.1007/s12289-009-0472-2 - , , :
Investigations on Three-Roll Bending of Plain Tubular Components
In: Key Engineering Materials 410-411 (2009), S. 325-334
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.410-411.325 - , :
Manufacturing of Innovative Car Seat Components by Forming of Advanced High Strength Steels - Fundamental Research and Application
In: Key Engineering Materials 410-411 (2009), S. 3-11
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.410-411.3 - , :
A Method for the Layer Compression Test Considering the Anisotropic Material Behavior
In: International Journal of Material Forming 2009
DOI: 10.1007/s12289-009-0592-8 - , , :
Experimentelle Ermittlung der Formgebungsgrenzen metallischer Werkstoffe unter reiner Scherung
12. Workshop - Simulation in der Umformtechnik (, 26. März 2009 - 26. März 2009)
In: Tekkaya, A. E. (Hrsg.): 12. Workshop - Simulation in der Umformtechnik (26.03.2009) 2009 - , , :
Investigation of failure under shear-tension conditions with optical metrology
GOM Conference (, 25. Mai 2009 - 25. Mai 2009)
In: GOM mbH (Hrsg.): Proc. of GOM Conference 2009 - , , , :
Innovative Methoden zur Charakterisierung des Fließverhaltens und des Werkstoffversagens von Blechwerkstoffen
testXpo - 18. Fachmesse für Prüftechnik (, 19. Oktober 2009 - 19. Oktober 2009)
In: Zwick (Hrsg.): testXpo - 18. Fachmesse für Prüftechnik 2009 - , , , :
Research activities in field of materials forming behaviour and failure mechanisms
testXpo - 18. International Forum for Materials Testing (, 9. Oktober 2009 - 9. Oktober 2009)
In: ZWICK (Hrsg.): testXpo - 18. International Forum for Materials Testing (19.10.2009) 2009 - , , :
Charakterisierung des Versagens von hochfesten, mehrphasigen Stahlwerkstoffen in Abhängigkeit der Dehnungshistorie
In: Deutsche Gesellschaft für Materialkunde e.V. (Hrsg.): Tagungsband Werkstoffprüfung 2009 - , , :
Investigations on the thermal behavior of ultra high strength boron manganese steels within hot stamping
In: International Journal of Material Forming (2009), S. 259-262
ISSN: 1960-6206 - , , :
Verformungsabhängiges Umwandlungsverhalten von presshärtbaren Bor-Mangan-Stählen
4. Erlanger Workshop Warmblechumformung (Bamberg)
In: Merklein, M. (Hrsg.): 4. Erlanger Workshop Warmblechumformung 2009 - , :
Characterisation of the flow behavior of deep drawing steel grades in dependency of the stress state and its impact on FEA
In: International Journal of Material Forming 2 (2009), S. 415-418
ISSN: 1960-6206
DOI: 10.1007/s12289-009-0506-9 - , , :
Erfassung von Kontaktspannungen im Flansch während wirkmedienbasierter Blechumformprozesse
In: Automobiltechnik in Bayern, 2009, S. 70-73 - , :
Enhanced Formability of Ultrafine-Grained Aluminum Blanks by Local Heat Treatments
In: Key Engineering Materials 410-411 (2009), S. 169-176
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.410-411.169 - , :
Principles for the Heart Treatment Layout of Ultrafine-Grain Aluminium Blanks with Locally Adapted Mechanical Properties
In: Proceedings of the COMA 2010 2009 - ,