Schulte Robert

Dr. Robert Schulte

Profile

Projects

Process combination for manufacturing of teethed, thin-walled functional components out of tailored blanks (A01)

(Third Party Funds Group – Sub project)

→More information

Publications

2022

Henneberg J., Schulte RK., Merklein M.:
Investigation of tailored tool surfaces for improving the component quality of sheet-bulk metal forming parts produced by a combined deep-drawing and upsetting process
6th international Conference on Steels in Cars and Trucks (Mailand, 19. June 2022 - 23. June 2022)
In: SCT Conference Proceedings 2022

2021

Hetzel A., Schulte RK., Vogel M., Lechner M., Besserer HB., Maier HJ., Sauer C., Schleich B., Wartzack S., Merklein M.:
Functional Analysis of Components Manufactured by a Sheet-Bulk Metal Forming Process
In: Journal of Manufacturing and Materials Processing 5 (2021), p. 1-18
ISSN: 2504-4494
DOI: 10.3390/jmmp5020049
Hinz L., Metzner S., Müller P., Schulte RK., Besserer HB., Wackenrohr S., Sauer C., Kästner M., Hausotte T., Hübner S., Nuernberger F., Schleich B., Behrens BA., Wartzack S., Merklein M., Reithmeier E.:
Fringe projection profilometry in production metrology: A multi-scale comparison in sheet-bulk metal forming
In: Sensors 21 (2021), Article No.: 2389
ISSN: 1424-8220
DOI: 10.3390/s21072389
Vogel M., Schulte RK., Kaya O., Merklein M.:
Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet–Bulk Metal Forming Process
13th International Conference on the Technology of Plasticity, ICTP 2021 (Virtual, Online, 25. July 2021 - 30. July 2021)
In: Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y (ed.): Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity, Cham: 2021
DOI: 10.1007/978-3-030-75381-8_46
Vogel M., Schulte RK., Lechner M., Merklein M.:
Process Combination for the Manufacturing of Toothed, Thin-Walled Functional Elements by Using Process Adapted Semi-finished Products

2020

Merklein M., Schulte RK., Papke T.:
An Innovative Process Combination of Additive Manufacturing and Sheet Bulk Metal Forming for Manufacturing a Functional Hybrid Part
In: Journal of Materials Processing Technology (2020), p. 117032
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.117032
Schulte RK., Lechner M., Merklein M.:
Fundamental analysis For the application of hybrid semi-finished products in sheet-bulk metal forming
In: Journal of Materials Processing Technology 283 (2020), Article No.: 116709
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116709
Schulte RK., Papke T., Lechner M., Merklein M.:
Additive Manufacturing of Tailored Blank for Sheet-Bulk Metal Forming Processes
DOI: 10.1088/1757-899X/967/1/012034
Vogel M., Schulte RK., Hetzel A., Lechner M., Merklein M.:
Verfahrenskombination zur umformtechnischen Herstellung von verzahnten, dünnwandigen Funktionselementen aus prozessoptimierten Halbzeugen
23. Umformtechnisches Kolloquium Hannover (Hannover, 4. March 2020 - 5. March 2020)
In: Behrens B.-A. (ed.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 2020

2019

Gutknecht F., Vogel M., Schulte RK., Merklein M., Rosenbusch D., Koch S., Hübner S., Behrens BA., Tekkaya E., Clausmeyer T.:
Comparison of Strain-path Indicators for Analysis of Processes in Sheet-bulk Metal Forming
The 13th International Conference on Numerical Methods in Industrial Forming Processes
Hagenah H., Schulte RK., Vogel M., Hermann J., Scharrer H., Lechner M., Merklein M.:
4.0 in metal forming - Questions and challenges
12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2018 (Naples, 18. July 2018 - 20. July 2018)
In: Roberto Teti (ed.): Procedia CIRP 2019
DOI: 10.1016/j.procir.2019.02.055
Hetzel A., Schulte RK., Vogel M., Degner J., Merklein M.:
Maßgeschneiderte Halbzeuge - Umformtechnische Herstellung von Funktionsbauteilen zur Realisierung von Leichtbaukomponenten
In: wt Werkstattstechnik - Online 109 (2019), p. 745-749
ISSN: 1436-4980
Lechner M., Schulte RK., Merklein M.:
Augmented Reality for Forming Technology - Visualisation of Simulation Results and Component Measurement
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. June 2019 - 7. June 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (ed.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012045
Löffler M., Schulte RK., Freiburg D., Biermann D., Stangier D., Tillmann W., Merklein M.:
Control of the material flow in sheet-bulk metal forming using modifications of the tool surface
In: International Journal of Material Forming 12 (2019), p. 17-26
ISSN: 1960-6206
DOI: 10.1007/s12289-018-1399-2

2017

Kirchen I., Vogel-Heuser B., Hildenbrand P., Schulte RK., Vogel M., Lechner M., Merklein M.:
Data-driven Model Development for Quality Prediction in Forming Technology
In: 15th IEEE International Conference on Industrial Informatics (INDIN) 2017
DOI: 10.1109/INDIN.2017.8104871
Lechner M., Schulte RK., Meckler S., Merklein M.:
Augmented Reality Technology for the Purpose of Sheet Metal Forming Simulation Evaluation
10th Forming Technology Forum 2017 - Model Based Control for Smart Forming Processes
In: van den Boogaard, T. (ed.): 10th Forming Technology Forum 2017 - Model Based Control for Smart Forming Processes 2017
Schulte RK., Frey P., Hildenbrand P., Vogel M., Betz C., Lechner M., Merklein M.:
Data-Based Control of A Multi-Step Forming Process
In: Proc. International Deep Drawing Research Group Conf. IDDRG 2017 2017
DOI: 10.1088/1742-6596/896/1/012037
Schulte RK., Hildenbrand P., Lechner M., Merklein M.:
Designing, manufacturing and processing of Tailored Blanks in a sheet-bulk metal forming process
In: 45th SME North American Manufacturing Research Conference, NAMRC 45, LA, USA 2017
DOI: 10.1016/j.promfg.2017.07.059
Schulte RK., Hildenbrand P., Vogel M., Lechner M., Merklein M.:
Analysis of fundamental dependencies between manufacturing and processing Tailored Blanks in sheet-bulk metal forming processes
In: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom 2017
DOI: 10.1016/j.proeng.2017.10.779
Schulte RK., Lechner M., Vogel M., Hildenbrand P., Merklein M.:
Umformtechnische Herstellung von Funktionsbauteilen aus Tailored Blanks durch Blechmassivumformverfahren
22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017 (, 15. March 2017 - 16. March 2017)
In: 22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017 2017
Vogel M., Lechner M., Hildenbrand P., Schulte RK., Merklein M.:
Manufacturing of tailored blanks by flexible rolling and its application in a sheet-bulk metal forming process
SCT2017
In: Wieland, H. (ed.): Proceedings SCT2017 2017

2016

Gröbel D., Schulte RK., Hildenbrand P., Lechner M., Engel U., Sieczkarek P., Wernicke S., Gies S., Tekkaya AE., Behrens BA., Huebner S., Vucetic M., Koch S., Merklein M.:
Manufacturing of functional elements by sheet-bulk metal forming processes
In: Production Engineering 10 (2016), p. 63-80
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0662-y
Isik K., Gerstein G., Schneider T., Schulte RK., Rosenbusch D., Clausmeyer T., Nuernberger F., Vucetic M., Koch S., Huebner S., Behrens BA., Tekkaya AE., Merklein M.:
Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming
In: Production Engineering 10 (2016), p. 5-15
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0656-9
Landkammer P., Schneider T., Schulte RK., Steinmann P., Merklein M.:
A non-invasive form finding approach with application to metal forming
In: Production Engineering 10 (2016), p. 93-102
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0659-6
Löffler M., Andreas K., Engel U., Schulte RK., Gröbel D., Krebs E., Freiburg D., Biermann D., Stangier D., Tillmann W., Weikert T., Wartzack S., Tremmel S., Lucas H., Denkena B., Merklein M.:
Tribological measures for controlling material flow in sheet-bulk metal forming
In: Production Engineering 10 (2016), p. 459 - 470
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0695-2
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_57ecc7754021d
Merklein M., Lechner M., Gröbel D., Löffler M., Schneider T., Schulte RK., Hildenbrand P.:
Innovative approaches for controlling the material flow in sheet-bulk metal forming processes
In: Manufacturing Review 3 (2016), p. 1-17
ISSN: 2265-4224
DOI: 10.1051/mfreview/2016001
Schulte RK., Schneider T., Lechner M., Merklein M.:
Interaction of various functional elements in thin-walled cups formed by a sheet-bulk metal forming process
In: K. Saanouni (ed.): NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes 2016
DOI: 10.1051/matecconf/20168007003

2015

Hildenbrand P., Schulte RK., Merklein M.:
New process strategies to manufacture tailored blanks out of DP600 by orbital forming
In: Applied Mechanics and Materials 794 (2015), p. 144-151
ISSN: 1660-9336

Dr. Robert Schulte

Profile

Projects

Process combination for manufacturing of teethed, thin-walled functional components out of tailored blanks (A01)

Publications

2022 2022

2021 2021

2020 2020

2019 2019

2017 2017

2016 2016

2015 2015

2022

2021

2020

2019

2017

2016

2015