Hildering, Sven Dr. Sven Hildering Profile Projects Use of monocrystalline silicon as tool material for cutting thin metallic foils (Third Party Funds Single)Publications Expand All
2016 2016
Frey P. , Hildering S. , Tsoupis I. , Stellin T. , Merklein M. :Simulationsbasierte Untersuchung eines neuartigen Fügekonzepts für Rotoren elektrischer Maschinen In: simufact engineering GmbH (ed.): Tagungsband 17. RoundTable - Simulating Manufacturing 2016
Hildering S. , Michalski M. , Engel U. , Merklein M. :Tool Load Sensitivity against Multidimensional Process Influences in Microblanking of Thin Metal Foils with Silicon Punches In: Journal of Manufacturing Science and Engineering 138 (2016 ), Article No.: 091004 ISSN: 1087-1357 DOI: 10.1115/1.4033522
Schwingenschlögl P. , Hildering S. , Merklein M. :Investigation of Friction Conditions at Elevated Temperatures for Hot Stamping 7th International Conference on Tribology in Manufacturing Processes In: Thai Tribology Association (TTA) (ed.): Proceedings 7th International Conference on Tribology in Manufacturing Processes 2016 2015 2015
Hildering S. , Engel U. , Merklein M. :Improved Tool Performance in Microblanking of Thin Metal Foils Through Defined Cutting Edge Modification of Silicon Punches 4M/ICOMM2015 Conf. In: Annoni, M.; Fassi, I.; Wiens, G.J.; Dimov, S. (ed.): Proc. 4M/ICOMM2015 Conf. 2015
Schwingenschlögl P. , Hildering S. , Merklein M. :Characterization and Description of Friction Conditions for Hot Stamping and Partial Hot Stamping of Ultra High Strength Steel METEC & 2nd ESTAD In: Stahl-Institut VDEh (ed.): Proceedings METEC & 2nd ESTAD 2015
Schwingenschlögl P. , Hildering S. , Merklein M. :Untersuchung der Reibbedingungen beim Presshärten mittels Streifenziehversuchen bei erhöhten Temperaturen 10. Erlanger Workshop Warmblechumformung (Erlangen )In: M. Merklein (ed.): 10. Erlanger Workshop Warmblechumformung 2015 2014 2014
Hildering S. , Engel U. , Merklein M. :Influence of Process Errors on the Tool Load in Microblanking of Thin Metal Foils with Silicon Punches 9th International Conference on MicroManufacturing (ICOMM 2014) (Singapore , 25. March 2014 - 28. March 2014 )
Hildering S. , Merklein M. , Engel U. :Performance of Silicon Punches for Microblanking of Thin Metal Foils 4th International Conference on Nanomanufacturing (nanoMan)
Tsoupis I. , Hildering S. , Hagenah H. , Merklein M. :Werkstoffschädigung in der Prozesskette Schneiden - Biegen 17. Workshop Simulation in der Umformtechnik In: Liewald, M.; Tekkaya, A. E. (ed.): 17. Workshop Simulation in der Umformtechnik 2014
Tsoupis I. , Hildering S. , Merklein M. :Bending of high-strength low-alloyed steel with respect to edge crack sensitivity caused by shearing operations In: Procedia Engineering 81 (2014 ), p. 712-717 ISSN: 1877-7058 DOI: 10.1016/j.proeng.2014.10.065 2013 2013
Hildering S. , Engel U. , Merklein M. :Influence of the Cutting Edge Geometry on the Tool Stress Distribution in Monocrystalline Silicon Punches for Microblanking of Thin Metal Foils 10th Int. Conf. Multi-Material Micro Manufacture In: Azcárate, S.; Dimov, S. (ed.): Proc. 10th Int. Conf. Multi-Material Micro Manufacture 2013
Hildering S. , Tsoupis I. , Merklein M. :Process and Damage Behaviour of High Strength Steels in Shearing Operations XXXII. Verformungskundliches Kolloquium (Leoben )In: Buchmayr, B. (ed.): Tagungsband XXXII. Verformungskundliches Kolloquium 2013
Tsoupis I. , Hildering S. , Merklein M. :Numerical investigation of small curvature bendability of high strength low alloyed steel in air and die bending processes IDDRG 2013 (Zürich )In: Hora, P. (ed.): Proc. IDDRG 2013 2013
Tsoupis I. , Hildering S. , Merklein M. :Prediction of Damage in Small Curvature Bending Processes of High Strength Steels Using Continuum Damage Mechanics Model in 3D Simulation In: Production Engineering 7 (2013 ), p. 239-249 ISSN: 0944-6524 DOI: 10.1007/s11740-012-0441-3
Vatter P. , Hildering S. , Tsoupis I. , Merklein M. :Development of a damage prediction system for bending and cutting of high strength steels In: Key Engineering Materials 554-557 (2013 ), p. 2479-2486 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.554-557.2479 2012 2012
Hildering S. , Becsi L. , Engel U. , Merklein M. , Mescheder U. :Experimental investigations on high-precision microcutting of copper foils with microfabricated silicon punches In: Shore, P.; Spaan, H.; Burke, T. (ed.): Proc. 12th Int. Conf. European Society for Precision Engineering and Nanotechnology 2012
Hildering S. , Becsi L. , Merklein M. , Mescheder U. :Tranciatura ad alta precisione di fogli di rame mediante punzoni in silicio monocristallino rivestiti e non In: Lamiera (2012 ), p. 44-48 ISSN: 0391-5891
Merklein M. , Tsoupis I. , Hildering S. :Fertigung innovativer Bauteile aus hochfesten Stählen: Biegen und Schneiden – Risse vermeiden In: Zukunftstechnologien in Bayern - Neue Materialien, Verfahren und Produkte , 2012 , p. 28-31
Tsoupis I. , Hildering S. , Merklein M. :Methodology for the analysis of the process behaviour of advanced high strength steels in bending and shearing operations In: Key Engineering Materials 504-506 (2012 ), p. 895-900 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.504-506.895 2011 2011
Becsi L. , Hildering S. , Mescheder U. , Engel U. :Mikrostanzen - Einsatz von einkristallinem Silizium als Werkzeugwerkstoff für Schneidprozesse von dünnen Folien 4. Mikrosystemtechnik-Kongress Darmstadt (Berlin )In: BMBF ; VDE ; GMM ; VDI/VDE-IT (ed.): Tagungsband 4. Mikrosystemtechnik-Kongress Darmstadt 2011
Hildering S. , Becsi L. , Engel U. , Merklein M. , Mescheder U. :High-precision blanking of thin copper foils using uncoated and coated monocrystalline silicon punches 8th Int. Conf. Multi-Material Micro Manufacture In: Kück, H.; Reinecke, H.; Dimov, S. (ed.): Proc. 8th Int. Conf. Multi-Material Micro Manufacture 2011
Hildering S. , Engel U. , Merklein M. :Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils In: AIP Conference Proceedings 1353 (2011 ), p. 481-486 ISSN: 0094-243X DOI: 10.1063/1.3589561