Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Manufacturing Processes



Gruppe FP 2018




Participants

Head of Research Group

Members


Projects


Publications

    2019

    • Graser, M.; Wiesenmayer, S.; Müller, M.; Merklein, M.:
      Application of Tailor Heat Treated Blanks Technology in a Joining by Forming Process.
      Journal of Material Processing Technology 264(2019), pp. 259-272

    • Papke, T.; Huber, F.; Heimes, M.; Schmidt, M.; Merklein, M.:
      Charakterisierung der Umformbarkeit und mechanischen Eigenschaften von additiv gefertigtem Ti6Al4V.
      In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Martin Stockinger (Edtrs.): XXXVIII. Verformungskundliches Kolloquium, 2019, pp. 101-106

    • Wiesenmayer, S.; Han, D.; Meschut, G.; Merklein, M.:
      Untersuchung der Werkzeugbeanspruchung und des Verschleißes beim Schneidclinchen.
      In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Martin Stockinger (Edtrs.): XXXVIII. Verformungskundliches Kolloquium, 2019, pp. 63-68

    • Wiesenmayer, S.; Han, D; Müller, M.; Hörhold, R.; Meschut, G.; Merklein, M.:
      Fundamental mechanisms and their interactions in shear-clinching technology and investigation of the process robustness.
      Materialwissenschaft und Werkstofftechnik 50(2019)8, pp. 987-1005

    • Wiesenmayer, S.; Han, D; Meschut, G.; Merklein, M.:
      Investigation of the Tool Wear Behaviour in Shear-clinching Processes During the Running-in Phase.
      In: AIP Conference Proceedings 2113 (Edtr.): Proceedings of the 22nd International ESAFORM Conference on Material Forming, DOI: https://doi.org/10.1063/1.5112569, 2019, pp. 050005-1-6

    • Han, D.; Wiesenmayer, S.; Merklein, M.; Meschut, G.:
      Geometric and Corrosive Influence on Load-Bearing Capacity of Multi-Element Shear-Clinching Specimen.
      In: AIP Conference Proceedings 2113 (Edtr.): Proceedings of the 22nd International ESAFORM Conference on Material Forming, DOI: https://doi.org/10.1063/1.5112565, 2019, pp. 050001-1-6

    • Papke, T.; Merklein, M.:
      Characterization of Work Hardening Behavior of Additively Manufactured Stainless Steel 316L (1.4404) Using Bulk Metal Forming at Elevated Temperature.
      In: U. Reisgen, M. Schmidt, M. Zaeh, M. Rethmeier (Edtr.): Lasers in Manufacturing Conference 2019, 2019, pp. 1-10

    • Kuball, C.; Merklein, M.:
      Heating Effect on the Forming Behaviour of High Nitrogen Steel in Bulk Forming.
      In: AIP Conference Proceedings 2113 (Edtr.): Proceedings of the 22nd International ESAFORM Conference on Material Forming, DOI: https://doi.org/10.1063/1.5112701, 2019, pp. 160004-1-6

    • Jäckisch, M.; Michalski, M.; Merklein, M.:
      Residual effects of ultrasonic-assisted compression testing on pure copper.
      In: AIP Conference Proceedings 2113 (Edtr.): Proceedings of the 22nd International ESAFORM Conference on Material Forming, DOI: https://doi.org/10.1063/1.5112644, 2019, pp. 110001-1–6

    • Kleffel, T.; Frey, P.; Merklein, M.; Drummer, D.:
      Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals.
      Journal of Polymer Engineering, https://doi.org/10.1515/polyeng-2019-0098 39(2019)6, pp. 573-586

    • Kuball, C.; Jung, R.; Uhe, B.; Meschut, G.; Merklein, M.:
      Influence of the Process Temperature on the Tribological Behaviour during Bulk Forming of High Nitrogen Steel.
      In: (Edtr.): 1st International Conference on Advanced Joining Processes AJP 2019, 2019, published on CD

    • Wiesenmayer, S.; Graser, M.; Merklein, M.:
      Influence of the Material Combination on the Load-bearing Capacity of Shear-clinched Joints.
      In: (Edtr.): 1st International Conference on Advanced Joining Processes AJP 2019, 2019, published on CD

    2018

    • Papke, T.; Junker, D.; Huber, F.; Hentschel, O.; Schmidt, M.; Merklein, M.:
      Verknüpfung additiver Fertigung und Umformtechnik in Form hybrider Bauteile und Werkzeuge.
      In: Witt, G. (Edtr.): Tagungsband Fachtagung Werkstoffe und Additive Fertigung, 2018, pp. 64-69

    • Papke, T.; Dubjella, P.; Butzhammer, L.; Huber, F.; Schmidt, M.; Merklein, M.:
      Influence of a bending operation on the bonding strength for hybrid parts made of Ti-6Al-4V.
      Procedia CIRP 74(2018), pp. 290-294

    • Papke, T.; Graser, M.; Merklein, M.:
      Numerical modelling approach for the temperature dependent forming behaviour of Ti-6Al-4V.
      In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F. (Edtrs.): MATEC Web of Conferences, doi: 10.1051/matecconf/201819012004, 190, 2018, published online

    • Papke, T.; Junker, D.; Schmidt, M.; Kolb, T.; Merklein, M.:
      Bulk Metal Forming of Additively Manufactured Elements.
      In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F. (Edtrs.): MATEC Web of Conferences, doi: https://doi.org/10.1051/matecconf/201819003002, 190, 2018, published online

    • Han, D.; Hörhold, R.; Wiesenmayer, S.; Merklein, M.; Meschut, G.:
      Investigation of the influence of tool-sided parameters on deformation and occurring tool loads in shear-clinching processes.
      Procedia Manufacturing 15(2018), pp. 1346-1353

    • Huber, F.; Papke, T.; Kerkien, M.; Tost, F.; Geyer, G.; Merklein, M.; Schmidt, M.:
      Customized Exposure Strategies for Manufacturing Hybrid Parts by Combining Laser Beam Melting and Sheet Metal Forming.
      Journal of Laser Applications, International Congress on Applications of Lasers & Electro-Optics (ICALEO), doi: https://doi.org/10.2351/1.5096115, 31(2018)2, published online

    • Papke, T.; Huber, F.; Geyer, G.; Schmidt, M.; Merklein, M.:
      Characterisation of the tensile bonding strength of Ti 6Al 4V hybrid parts made by sheet metal forming and laser beam melting.
      In: Schmitt, R.; Schuh, G. (Edtrs.): Advances in Production Research - Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), 2018, pp. 361-370

    • Heinel, M.; Frey, P.; Merklein, M.; Drummer, D.:
      Einfluss mikrogeformter Kanten an Metalleinlegern auf die Temperaturwechselbeständigkeit mediendichter Kunststoff-Metall-Hybriden.
      Zeitschrift Kunststofftechnik 14(2018)3, pp. 211-232

    • Papke, T.; Huber, F.; Hagenah, H.; Schmidt, M.; Merklein, M.:
      Potentiale der Kombination von Umformtechnik und additiver Fertigung in hybriden Prozessketten.
      In: Drummer, D. (Edtr.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung, Print Line, 2018, pp. 59-76

    • Huber, F.; Papke, T.; Scheitler, C.; Hanrieder, L.; Merklein, M.; Schmidt, M.:
      In Situ Formation of a Metastable beta-Ti Alloy by Laser Powder Bed Fusion (L-PBF) of Vanadium and Iron Modified Ti-6Al-4V.
      Metals 8(2018)1067, pp. 1-9

    2016

    • Frey, P.; Höhler, C.; Merklein, M.:
      Effect of Residual Stress on the Distortion of Microembossed Metal Inserts for Assembly Injection Moulding.
      In: Tosello, G.; Nørgaard Hansen, H.; Ehmann, K.; Dimov, S. (Edtrs.): 4M/IWMF2016 Conference: Proceedings of 11th International Conference on Multi-Material Micro Manufacture, 2016, pp. 691

    Last Update: 29.08.2018