Tailored Carburization: Adjusted mechanical Properties in blank plane and blank thickness direction
Head
Researcher
Funding period:
Start: 1. January 2017
Ende: 30. June 2019
Abstract
Within this research project, basic
methods for an adjustment of mechanical properties via local
carburization have been developed. To accomplish this, the sheets of a
complex phase steel are coated with graphite and subsequently
heat-treated at temperatures between 900 °C and 950 °C. A suitable
process window was identified based on the influencing factors'
carburization time, carburization temperature and sheet thickness.
Afterwards, a detailed characterization of the transition zones between
carburized and non-carburized areas was conducted. Furthermore, this
research project seeked to analyze the additional coating's influence on
the heat transfer coefficient as well as verify the results by applying
them to a model geometry.
Research groups
Publications
2021
- , :
Analysis of the thermomechanical flow behavior of carburized sheet metal in hot stamping
13th International Conference on the Technology of Plasticity (ICTP) (Columbus, OH, USA, 25. July 2021 - 30. July 2021)
In: Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y (ed.): Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity 2021
DOI: 10.1007/978-3-030-75381-8_65 - , :
Bending behavior of a hot stamped complex phase steel with tailored properties by local carburization
40th International Deep-Drawing Research Group Conference (IDDRG) (Stuttgart)
In: IOP Conference Series: Materials Science and Engineering 1157 2021
DOI: 10.1088/1757-899X/1157/1/012011 - , :
Investigation of the Microstructural Evolution during Hot Stamping of a Carburized Complex Phase Steel by Laser-Ultrasonics
In: Materials 14 (2021), Article No.: 1836
ISSN: 1996-1944
DOI: 10.3390/ma14081836
2020
- , :
Functional optimization of hot-stamped components by local carburization
In: International Journal of Lightweight Materials and Manufacture 3 (2020), p. 43-54
ISSN: 2588-8404
DOI: 10.1016/j.ijlmm.2019.09.002
2019
- , :
Investigation of diffusion behavior of carburized sheet metal in hot stamping
In: Manufacturing Review 6 (2019)
ISSN: 2265-4224
DOI: 10.1051/mfreview/2019017 - , :
Investigation of the Quenching Behavior of Carburized Sheet Metal in Hot Stamping
7th International Conference on Hot Sheet Metal Forming of high-performance steel - CHS2 (Luleå)
In: Oldenurg M, Hardell J, Casellas D (ed.): Proceedings of the 7th International Conference on Hot Sheet Metal Forming of high-performance steel - CHS2 2019
2018
- , :
Identification of a process window for tailored carburization of sheet metals in hot stamping
In: AIP Conference Proceedings 1960 (2018), Article No.: 160012
ISSN: 0094-243X
DOI: 10.1063/1.5035038 - , :
Fertigung funktionsoptimierter Bauteile beim Presshärten
13. Erlanger Workshop Warmblechumformung (Erlangen)
In: M. Merklein (ed.): Tagungsband zum 13. Erlanger Workshop Warmblechumformung 2018 - , :
Investigation of diffusion behavior of carburized sheet metal in hot stamping
5th International Conference on New Forming Technology (ICNFT 2018) (Bremen, 18. December 2018 - 21. December 2018)
In: F. Vollertsen, T.A. Dean, Y. Qin, S.J. Yuan (ed.): MATEC Web Conf 2018
DOI: 10.1051/matecconf/201819008004
Deutsch